EI Work

Amount

S & F 250V, 4 Ft. Long 18 Watt LED fittings complete with all accessories. (Make: Philips / Crompton /HPL) with submission of test report and two years warranty certificate.

(i) Philips TMC 501P 1xT-LED 22W P3242 with 01 No. MAS LEDtube 1200mm 18W865 T8 I – 2100lm / Crompton IGP161LT8-16 with 1 No. LT8-20-865-(2)/HPL HPLLEDT8PC18(CW) with 01 no LEDtubeHPLT81418PC(CW) LED Tubelight.

(ii) Philips TMC 501P 2xT-LED 22W P3242 with 02 Nos. MAS LEDtube 1200mm 18W865 T8 I – 2100lm / Crompton IGP162LT8-16 with 2 Nos. LT8-20-865-(2)/ HPL HPLLEDT8PC36(CW) with 02 nos LEDtubeHPLT81418PC(CW) LED Tubelight.

S & F LED Tube light on existing tube fitting set. (Make: Philips / Crompton/HPL) with submission of test report and two years warranty certificate

(i) Philips MAS LEDtube 1200mm 18W865 T8 I – 2100lm / Crompton LT8-20-865-(2)/HPL HPLT81418PC(CW) LED Tubelight.

S & F 1400mm Sweep AC Ceiling Fan (color rich brown) without regulator with all accessories. (Make: Orient Electric Summer Brezze or Summer Cool / Cropmton Aura).

S & F Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc. (Make: Anchor)

S & F 250 volt 5 amps piano key type switch. (Make: Anchor)

S & F 250 volt 5 amps 5 pin flush type socket. (Make- Anchor )

S & F 250 volt 15 amps piano key type switch (Make- Anchor)

S & F 250 volt 20 A flush type socket (Make- Anchor)

S & F bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required.

(i) 150 mm x 100 mm x 65 mm

(ii) 200 mm x 150 mm x 65 mm

(iii) 240 mm x 200 mm x 65 mm

S & F 63A, 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating (Make: L & T).

S & F of following LED outdoor luminaries.

(i) Make: Philips Model BRP410 LED CW 072 MR FG S1 PSU GR / Make HPL Model HPLLEDSL07260E with submission of test report and warranty certificate for atleast 5years

Supply & Erection of 1.5m long 80mm dia ST pole with base plate & pole cap incl. C.C. (6:3:1) muffing 0.30 Mtrs dia and 0.30 Mtr. incl. 3mm thick neat cement finish and making earth bolt washer and G.I. earth bolt on plate as to G.S.

S & F Single Arm header fabricated with 100 mm dia G.I. pipe of 10" length welded with 1.2 m long 40 mm dia. G.I. pipe at an angle of 15 deg with plate incl. S / F nuts, bolts washer etc.

S & F G.I. Water proof looping cable box having hinged GI Top Cover having 4mm Thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the size 200mm x 150mm x 100mm comprising of the 250V, 15A Kit-kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy.

Supply & Delivery of 9.00 mtr long sweged and welded steel stubular poles as per IS- 2713-1980 (410-SP-29) approx. weight 125 Kg having following diamensions, Bottom- 139.7mm dia. X 4.85mm thick X 5m long, Middle- 114.3mm dia. X 4.5mm thick X 2m long, Top- 88.9mm dia X 3.25mm thick X 2m long incl. pole base. (Make: Subham Poles / Utkarsh / Calcutta poles & Tubes)

Erection of 9 Mtrs. Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (600x600x1700mm), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly incl painting.

Supply and delivery of following 1.1 KV grade XLPE/PVC Alluminium armoured 2 Core 10 Sqmm Cables. (Make: Polycab / Gloster / KEI)

S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 2 Core 10 Sqmm XLPE/PVC armoured cable.

Finishing the end of 2 Core 10 Sqmm XLPE/PVC armoured cable by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

Laying of one No. 2 Core 10 Sqmm cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of 2 Core 10 Sqmm cable after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth of 75 mmin floor / pavement / wall and mending good the damages to original finish incl. removing the rubbish.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make: Polycab / KEI / Finolex / Havells / Gloster) of the following sizes in the polythene pipe as mention below, embeded in wall incl. supplying and drawing 18 SWG GI wire as Fish wire and GI 'U' hooks of 8 SWG incl. Cutting Channel of size (43 mm x 43 mm or as required) on masonry wall by Electric operated cutting machine and mending good damages to original finish.

(i) 4 x 16 sq. mm. + 2 x 10 sq. mm.

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

(i) 10 Sqmm.

(ii) 16 Sqmm.

S & Delivery of (8 Ft. x 4 Ft.) = 32 Sq.Ft. Glow Sign Board febricated with 25x25x6 mm M.S. Angle and 25 mm x 6mm M.S. Flat Front side of the board making arrangement for hinged type door with locking arrangement made with M.S. Angle incl. Provision for fixing the poly carbonate sheet facia approved colour (3 mm thick ) with computerised lettering in blue base white lettering rigidly fixed on angle iron frame and 25 mm x 25mm Al. angle with nuts bolts washer etc. for fixing the facia. Bake side incl. rest four side of the board cover with 20 SWG Al. sheet. The facia should beilluminated with 4ft lonng 18/20 watt F.L. fittings (LED) required nos. incl. making arrangement for fixing the board incl. painting the inside of the board by shanthetic enamelled white colour paint as per direction of E.I.C. (Matter will be given at the time of execution of work).

S & F 250V, 20 watt LED fittings complete with all accessories incl. LED tube with submission of two years warranty (Make: Philips TMC 501P 1x T-LED 22W P3241 with 1 No. MAS LEDtube 18W865 T8 I - 2100lm / Crompton IGP161LT8-16 with 1 No. LT8-20-865-(2)/ HPL HPLLEDT8PC18(CW) with 01 no LEDtubeHPLT81418PC(CW) LED Tubelight) on Glowsign Board on M.S. Angle by necy. Screws etc.

Fixing the Glowsign board on wall of the Govt. Model School, Manikchak with required M.S. Angle, Nuts and Bolts etc. Incl. S&F required MS angle, Nuts and Bolts etc. Incl. Carrying charges and mending good the damages.

S & F of 2 Way MCB SS enclosure with IP-20/30 protection, powder coated provision for 240V, 40A DP MCB Isolator, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.

Loop wiring by 3 x 1.5 sq. mm. PVC insulated Cu. Wire through PVC pipe from Loop Box to Fittings of the pole as per direction of EIC.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI-Medium GI pipe.

S & F earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F No. 8 SWG GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

Supply of hotdip galvanized flange mounted polygonal tapered type Highmast of 12.5 mtr normal menting height suitable for & speed of 50/m/s (180 m/brs) of segments defaults 2 nos finished section in length 5675 mm thick 5m, 4m, 20 sided top flacto face inside 200mm face to face inside 360mm circular box plate 575x25 PCD of bolts 461 size of µ-24 x1200 no of bolts & door openly 300x1400 inch which SWL CAP 750Kg 65m dia of steel rope with suspension system , power motor tool for electrical operation hard frame galvanized lantren carriage arrangement with high power 3Ph 2HP suitable for 6nos Luminaries systetically & its control gear boxes & light fittings incl. neon tape aviation light, safety arrangement incl. heater assembly as per direction of EIC including Erection & commissioning of 12.5 mtr Highmast on C.C foundation with ratio of 1:2:4 as per design & casting housing of suitable PCC/RCC shallow foundation with foundation bolts manufacturing from special steel for highmast after assembling the Highmast. (Make: Bansal / Jindal / Bajaj / Subham/Crompton)

Earthing with 65 mm dia GI pipe (TATA-Medium) x 3.0 Mts. long and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts.

S & F 415V, 63A TPN Main Switch with HRC fuse on angle iron frame on wall incl. earthing attachment & painting as per GS. (Make: Havells / Standard)

Supply & drawing of 1.1 KV Grade 4 Core 16 Sqmm PVC/A Al cable partly recessed in wall & mending in U.G. trench with brick protection as per GS.

(i) In under ground Trench as to GS.

(ii) In recessed in wall.

S & F compression type gland complete with Brass Gland, brass ring & rubber ring for dust & moisture proof entry for 4 Core 16 Sqmm PVC/A.

Finishing the 4 Core 16 Sqmm PVC/A Al cable ends by soldering with Cable Socket & insulated tapes etc. incl. supply socket soldering materials, tapes etc & making connection.

S & F of 180W LED flood luminaries with pressure die cast Al housing & heat resistant touchend flat glass (IP 65) complete with EMITTER LED. (Make: Bajaj / Philips BVP192 LED172 CW NB FG A1 GR PSU / Crompton LFLN-180-CDL/60-M/ HPL HPLLEDFL18060S ) with submission of test report and warranty certificate for atleast 5years

Man in and adopting micro tunneling of 50 mm dia hole to facilitate cable entry without disturbing and damaging as per requirement and as per direction of EIC (3 ft below the ground level).

Supply and providing (50 mm dia) havey gauge PVC pipe without any jointing through micro tunneling as permanent solution of longevity of tunnel as per direction of EIC for drawing of road crosing cable.

S & D outdoor type M.S. mini Pillar Box complete with car venture type base pedestal for holding the upper compartment of the Pillar Box. The overall dimension of the above Pillar Box 750 x 500 x 400mm. made from 4mm. thick M.S. sheet with single door for free opening. The above door fitted with side of the Pillar Box by single set hinge system arrangement with providing capsule hinge welded with the Pillar Box rigidly incl. providing door handle and providing Vent at the top side of the Pillar Box incl. padlock system on the above Pillar Box for extra protection incl. S & F 7 (seven) lever (Godrej) padlock with duplicate key in front side. There should be provision inside the Pillar Box of 1 No. suitable size of Hylam sheet holding the electrical accessories with suitable size of angle iron frame fitted inside the middle portion of the above Pillar Box and S & F of following accessories.

(a) 1 No. 415V 63A TPN SFU with HRC fuses (L&T with sheet steel enclosure) - 1 Set. (b) 1 No. 550V 100A BBC (400 x 350 x 150) mm. with 4 nos. Copper bar on porcelain chair including providing following accessories at the top cover of BBC as per direction of E.I.C. - 1 Set. (c) S & F Pilot Lamp (R/Y/B). - 3 Nos. (d) S & F 450 V,10KA, 40A T.P MCB C curve, ----1nos. Make-( Legrand/Siemens) (e) 230V,10KA, 16A S.P MCB C curve. (Make: Legrand / Siemens) - 12 Nos. (f) S & F 32A DP Isolator- 1 Nos (make-Legrand) and S & F Suitable size DIN rail for installation of different rated MCB, and S & F suitable rated connector for for both phase and neutral on insulator chair and backelite sheet). (g) S & F of suitable rated inter connecting Cu Wire from Busbar to MCB and MCB to Connector with socketing. (h) S & F 40A power contactors with suitable add on blocks with necy. Connection - 1 No.(make-legrand, L&T) (i) S & F AC 50HZ, 3Ph Digital time switch (Make -L&T, Legrand, Havells) (j) By pass switch - 1 no. Including necessary paintings as per direction of EIC.

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duties etc including GST. (ii) All materials, equipments & accessories must conform to relevant IS / IEC specifications. (iii) Necessary manufacturer's warranty certificate will have to be submitted during delivery of the material.

GITANJALI ELECTRONICS AND ELECTRICALS

M/S EASTERN ENGINEERING