PROVISION OF EXTERNAL FINISHES FOR BUILDINGS NO P-01, P-02, P-05, P-08 AND P-09 AT PALAM BAGH, PAVED AREA NEAR C BLOCK AND SPECIAL REPAIRS TO BADMINTON COURT AT NOM VARUNA IN THE AOR OF

Amount

M&L for complete removal of existing treatment from old surfaces of wall and applying two coats of Exterior Emulsion paint (APEX ULTIMA) over one coat of primer and over incl one coat of Birla putty all as specified and directed.

M&L preparation of old wood or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint.

M&L preparation of old steel and iron surfacesof any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint.

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc all as specified

M&L Polymer modified cementious bonding coat , prepared and applied on the concrete/ masonry surfaces with I part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight.Coverage of SBR latex-0.25Ltr / sqm for one coat.

M&L 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be measured and paid separately)

Supply only Styrene Butadiene Rubber latex emulsion.

M&L preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint (APEX ULTIMA) over one coat of primer and over incl one coat of Birla putty all as specified and directed.

M&L Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper on walls over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

S & F GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stachions, beams etc incl all laps cutting and waste complete all as directed by EIC

M&L 10 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified. ( SBR latex shall be measured and paid separately)

M&L Preparation of new plastered or un-plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall and applying two coats of oil bound distemper over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

S & F PVC chhaja (Factory made) exc 0.2 sqm and not exc 0.6 sqm and fasterner 150mm long with complete set as per sample including demolition of old RCC chhaja complete all as specified and directed by Engr-in-charge and approval by GE

Dismantling loose concrete cover of RCC columns, beams, slabs, chajjas, parapets, railing and the like as directed without disturbing the core of RCC member, roughening and cleaning concrete surfaces with steel wire brushes, washed with and allowed to dry, including application of rust removal cum passivator painted with brush to the rusted reinforcement (and removing rust with flex after 24hours of application of rust remover with the help of wire brush, sand paper) and also applying zinc anti-rust agent as per manufactures method of application to re bar corrosion protection system to reinforcement surface of steel reinforcement with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding after that applying polymer modified cementious bonding coat, prepared and applied on the concrete surface with 1 part of sika latex or equivalent in Forsoc/BASF/Dr Sunanda with 4 part of water and 6 part of cement by weight, coverage of sika latex shall not be more than 0.25 Kg/Sqm for one coat. Adhesive bond strength not less that 2.5 mpa, After this, providing 40mm (average thickness) guiniting mix @ pressure 2.2 to 2.5 kg per sqcm with anti corrosion admixture (using 1 part of ordinary potland cement 43 grade and 2 part of Ghagger sand mixed with adhesive /admixture at the rate as per manufacturer instruction and as directed) including stripping floting with wooden strippers for proper dimension control necessary, formwork and scaffolding, complete surface of guiniting to be finished fair with 10mm thick plaster in cement 1:4 with water proofing compound @ 3% by weight of cement cleaning and removing of waste material etc as directed at site. ( Welded mesh & addl reinforcement if required measured and paid separetly) Note :-Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth) up to Four storey building.

Demolition cement concrete(reinforced) in ground floors and upto 4 storey of any description and in any position incl MS pipes Scafolding and making arrangemenets with hessian clothes for protection from falling of concrete & all othersaftey precautions complete all as specified and directed.

M & L expanded metal, cut to length, bent to shape required of mild steel wire mesh / welded mesh and tying with and including annealed mild steel wire not less than 0.9mm dia binding wire or galvanised wire staples complete to existing reinforcement or steel members. (mesh weight not exceeding 4.00 Kg/Sqm) complete all as directed

M&L for PCC/RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills , copings and like incl. weathering , slightly rounded or chamfered angles and throating as directed

M & L uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets and roof of bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. Note: Work has to be executed up to (G + 3 storey) bldg

Removing building materials /old waste unwanted existing material of any description or any type etc. (other than spoil payable under items 03028 to 03031 in Section-3-Earthwork) to a distance of 5km or beyond the lead included in the rates, including loading, unloading and stacking at the destination in all respect as specified directed by Engr-in-charge

1 Roughning surface of old concrete floor by picking, Sweeping clean and washing down with water to remove dust, etc.

2 M & L Brushing neat cement slurry with 3.0 kg of cement per sq meter

3 M & L for laying digital parking vitrified tiles 7 to 10 mm thick (Square/ rectangular) area of each tile not eceeding 0.36 Sqm in floor for external surface/ pavings etc laid over screed bed or bedding layer of cement mortar 1:4, 20 mm thick and jointed in neat cement slurry and pointed with white cement or coloured cement to match with tiles "Dura stone" of Somani tiles (Neo traffic cotto), "Endura" of Jhonson paver vitrified parking tiles or equilatent premium tiles of other brands complete all as specified.

4 Dismantling structural steel work including door, gates but excluding framed truss etc.

5 S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

6 Complete removal of existing treatment and preparation of undecorated brick concrete plastered un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts oil and greasy spots and applying two coats of weather proof, water based, modified acrylic exterior wall paint with silicon additives (with anti fungus and anti algae properties) over a coat of solvent based primer over 1.5mm thick birla wall care putty surfaces complete.

7 S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters; walk ways, railings, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

8 M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

9 M&L Plain cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) as in benching,bed plates coping and the like including provision of form work and finishing all exposed surfaces of concrete complete all as specified .

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness.

M&L for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in flooring finished even and smooth withot using extra cement

Providing and fixing of Syenthetic PVC vinyl Flooring System as per Specification Below :- 8mm PVC vinyl - Green, top waer layer- 1.5 mm and 2 layers of cushioning and 1 layer of glass fibre for strength. Cushioning should be similar to wooden court. All line marking and fixing. cost includes removal of previous court, fixing of base and installation of new courts - 2 Nos Approved By FIBA & BWF Federations. (The work will be executed by specialised applicators) Specification for Synthetic Mats for Badminton Courts:- Width :- 1.8 M Length :- 15 M Surface Pattern : - Crystal Sand Wear Layer :- 1.5 mm Thickness : - 07mm Inner Size:- 13.4 M x 6.1 M Outer size:- 15 M x 7.2 M Area:- 108 Sqm Each Court

M&L 15 mm thick plaster in CM (1:6) mixed with Recron fibre @ 125 gram of 50 kg cement and chicken mess on fair face of brick walls finished even and smooth without using extra cement all as specified.(Recron fibre and chicken mess shall be measured and paid separately)

M&L 15 mm thick plaster in CM (1:4) mixed with Recron fibre @ 125 gram of 50 kg cement and chicken mess on fair face of brick walls finished even and smooth without using extra cement all as specified.(Recron fibre and chicken mess shall be measured and paid separately)

Supply only Recron fibre

S&F chicken mess with nails of size 50 mm long complete all as directed

M&L two coat of acrylic emulsion painting over a coat of primer including preparation of surfaces of new wall surfaces and making good using birla wall care putty 1.5mm thickness complete all as directed.

Complete removal of old painted surfaces of existing wall and applying two coat of acrylic emulsion painting over a coat of primer including preparation of surfaces of old wall surfaces and making good using birla wall care putty 1.5mm thickness complete all as directed.

M&L for preparation of undecorated brick concrete plastered un-plastered surfaces of walls, Pillars, cornices etc and applying two coats of weather proof, water based, modified acrylic exterior wall paint with silicon additives (with anti fungus and anti algae properties) over a coat of solvent based primer over 1.5mm thick birla wall care putty surfaces complete.

M&L for preparing old surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint all as specified and as directed. (Scaffolding is reqd)

Supply and Fixed Aluminium powder coated decorative grill with 6.3mm thick aluminum section and 50X50mm openings , weighing not less than 1.75Kg/Sqm and anodized aluminium 'U' shape channel frame work alround the grill and fixed with steel screws to circular 600mm dia RCC pipes complete all as specified and directed. Note for item No 01 to 20 :- The work described in these items shall be executed in bldgs upto (G+3 floor) hence the contractor making arrangemenets with green clothes for protection from falling of concrete & all othersaftey precautions and the rates are deemed to be included in the quoted unit rates.

MRITUNJYA ASSOCIATES

B S R Enterprises