Construction of 3 rooms office building, toilet block and repair of boundary wall and roads at cattle feed plant Jind.(Pdg. E.I. only) Recall

Amount

(a) Main Switches 31.12 (c) Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 31.12 c (i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

(L) Miniature Circuit Breaker and Isolator. 31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (a) Miniature circuit breakers of 9 KA breaking capacity. 31.17a) (ii) SP MCB 6 Amp.

31.17a) (ii) SP MCB 10 Amp.

(M) Supply and erection of Fittings and Accessories. 31.18 (vii) Call bell 220 / 230 volts A.C. bakelite with double coil.

31.18 (ix) (b) Bell push flush type ( without flexible wire ) in existing sheet.

31.18 (xi) Bakelite angle / straight button holder large size.

31.18 (xxiv) Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm (24 / 0.20 mm) PVC copper flexible cable for connecting the tube with the adjecent point.

31.18 (xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

(O) Erection and carriage of fans.. 31.20 (vi) Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

(P) Pipe Laying. 31.21 Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. 31.21 (xxi) Heavy gauge welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

31.21 (xxii) Heavy gauge welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

31.21(xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. 31.21(xxx) (b) PVC pipe 80 mm dia.

31.22 (Q) Earthing 31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

31.22(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

31.22(xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required.

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 31.26 (xI) Ard. 16 Sq. mm 4 Core Cable .

(X) Miscellaneous . 31.35 (vii) Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of bakelite sheet .

31.36 PVC insulated wiring in recessed conduit wiring in 1.5 sqmm PVC insulated copper conductor cable in 1.6 mm thick conduit pipe. (I) Fan Point - (b) Medium Point.

(c) Long Point.

(II) Light Point- (a) Short Point.

(b) Medium Point.

(c) Long Point.

(VI) Call bell point including M.S. Box of size 180 mm x 100 mm x 60 mm deep for call bell. (c) Long Point.

(VII) 3-Pin 5 Amp. plug point including earthing the 3rd Pin etc. (b) Medium Point.

(c) Long Point.

( VIII ) 3-Pin 15 Amp. plug point with 4 Sqmm PVC insulated copper conductor cable including earthing the 3rd Pin etc. (c) Long Point.

31.40 Supply & erection of PVC unsheathed copper conductor cable single core 1100 volts grdae in pipe of suitable size excluding cost and erection of pipe. 31.40 (i) Cable size 1.5 Sqmm ( 3/0.81 mm ).

31.40 (iii) Cable size 4 Sqmm ( 7/0.85 mm ).

31.41 Supply & erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 31.41 (v) 4-way , TP&N ( Horizontal) (8+12)

31.44 Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. 31.44 (ii) 25 mm dia.

31.55 Supply and erection of socket size rotary step type electronic regulator for A.C. Ceiling fan Anchor Make Deluxe Model No. 50440 ISI / SSK make PC 561 operated on 120 /280 Volt A.C. Supply complete including cutting of existing bakelite sheet and making necessary connection etc. upto the entire satisfaction of Engineer-in-charge of work.

31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (i) HDPE pipe 63/50 mm outer dia/inner dia.

M.R. items NS-1 Supply and Errection of AC celling fan 48" (1200 mm sweep) ISI 3 Star with 3 no. blades and down rod complete in all respect Make- Orient,Crompton with all accessories as supplied by the manufucture including the cost of all labour material required to complete the job in all respect upto the entire satisafaction of Enginner-in-Charge of the work.

NS-2 Supply and Erection of Exhaust Fan 15" (380 mm sweep) ISI complete in all respect Make - Usha,Orient with all accessories as supplied by the manufucture including the cost of all labour material required to complete the job in all respect upto the entire satisafaction of Enginner-in-Charge of the work.

NS-3 Supply and Erection of LED tube light fitting 18 Watt 4' Feet Long ISI Complete in all respect Make - Phillips,Bajaj with all accessories as supplied by the manufucture including the cost of all labour material required to complete the job in all respect upto the entire satisafaction of Enginner-in-Charge of the work.

NS-4 S/E of LED Tube light fitting 36 Watt 4" feet Long ISI Complete in all respect Make- Bajaj,Phillips with all accessories as supplied by the manufucture including the cost of all labour material required to complete the job in all respect upto the entire satisafaction of Enginner-in-Charge of the work.

NS-5 Supply and Erection of LED street light lumanaries of Havells make Endura PLEARL DLUSSL 70W LED or its equivalent make of Wipro make LR02-781-xxx-57-xx / Philips make BRP409LED 065CW / Surya SLE UL-72W with die cast housing, toughened glass IP66 with all acessories as supplied by the manufacturer with all labour and material required to complete the job in all respect upto the Entire Satisfaction of the Engineer-in-Charge of the work.

NS-6 S/E of sheet steel enclosure distribution board ( Havell's / Standard make ) G Frame 4 Poles recessed in floor / wall / or pedestal suitable for MCCB's including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work.