REPAIRS AND POLISHING VARNISHING OF WOODEN FURNITURE AND RENEWAL REPLACEMENT OF CONDEMNED FURNITURE AT AFS JORHAT UNDER GE AF JORHAT

Amount

Removing/Taking out carefully following old unserviceable worn out/components parts of the BED PLY TOP (FD-246) and replacement with new materials/components, made to shape duly finished to receive polish complete all as specified, directed and shown on drawing.

4 mm thick ply wood of head board teak face (one side)

4 mm thick ply wood of foot board teak face (one side)

Long Rail for Bed ply Top made out of second class hard wood

12 mm thick ply wood of size 1890 mm x 900 mm bed top commercial

Removing/Taking out carefully old unserviceable ply top of BED NEWAR /COT NEWAR (FD-214) and replacement with new Ply Top 12 mm of size 2000 x 930 mm, made to shape finished to receive polish all as specified, directed and shown on drawing.

Removing/Taking out carefully following old unserviceable worn out/components parts of SIDE BOARD ( FD 26) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Top of size 1200 X 445 mm, made of 18 mm thick plywood with 1 mm thick laminated sheet fixed with adhesive and 4 mm thick second class HW edging all around.

Door of size 585x835mm, made of 18mm thick plywood BWR grade with 1 mm thick laminated sheet fixed with adhesive and 4 mm thick second class HW edging all around.

Side made out of 18 mm thick plywood BWR grade with 1 mm thick laminated sheet fixed with adhesive all as specified.

Back made of 6 mm thick plywood BWR of Size 1220 X 625 mm all as specified.

Drawer all as specified and shown on drawings.

Removing/Taking out carefully following old unserviceable worn out/components parts of CHAIR DINING (FD-279, FD-228) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Front Leg made out of 2nd class HW .

Rear Leg made out of 2nd class HW .

Stiffner made out of 2nd class HW .

Rail with necessary holes for canning made out of 2nd class HW .

Removing/Taking out carefully following old unserviceable worn out/components parts of CHAIR EXECUTIVE REVOLVING LONG BACK TP and replacement with new materials/components, made to shape finished complete all as specified, directed and shown on drawing.

S&F PVC pedestal with castors (wheel) of chair executive revolving long back all as specified and directed by engr-in-charge.

S&F of Hydraulic piston (for height adjustment) for chair executive revolving Long Back all as specified and directed by Engr-in-charge.

S&F of Castor (wheels) for chair executive revolving Long Back all as specified and directed by Engr-in-charge.

Remove the old U/S cushion and tapestry cloth and S&F with new cushion and tapestry cloth for seat of chair executive revolving long back as per existing shape and size all as specified and as directed by Engineer-in-Charge.

Remove the old U/S cushion and tapestry cloth and S&F with new cushion and tapestry cloth for back of chair executive revolving long back as per existing shape and size all as specified and as directed by Engineer-in-Charge.

S&F PVC handles of chair executive revolving Long Back of existing shape and size including removing of unserviceable handle all as specified and directed by Engr-in-charge.

Removing/Taking out carefully following old unserviceable worn out/components parts of CHAIR COMPUTER OF TP and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

S&F PVC pedestal with castors (wheel) of chair computer all as specified and as directed by engineer-in-charge

S&F PVC Handles of chair Computer of existing shape and size including removing of unserviceable handle all as specified and as directed by engineer-in-charge

S&F of hydrolic piston (for height adjustment) of chair Computer all as specified and as directed by engineer-in-charge

S&F of castor wheel of chair Computer all as specified and as directed by engineer-in-charge

Remove the old US cushion and tapastry cloth and S&F with new cushion and tapestry cloth for back of chair computer as per existing shape and size all as specified and as directed by engineer-in-charge

Remove the old US cushion and tapastry cloth and S&F with new cushion and tapestry cloth for seat of chair computer as per existing shape and size all as specified and as directed by engineer-in-charge

Removing/Taking out carefully following old unserviceable worn out/components parts of CHAIR DINING MAP (FD/MAP/02) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

S&F new seat of chair dining MAP as per existing shape and size all as specified and as directed by Engineer-in-charge. Make : AMCO/CELLO/SWASTIK

Front Leg made out of 2nd class HW .

Rear Leg made out of 2nd class HW .

Stiffner made out of 2nd class HW .

Rail with necessary screws

Removing/Taking out carefully following old unserviceable worn out/components parts of TABLE 900 X 600 X 760 MM WITH DRAWER (FD 283 /FD 224) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Leg made out of 2 nd class HW .

Stiffner 25 x 40 mm made out of 2nd class .

Table top 900 x 600 mm thick prelaminated particle board with 4 mm thick 2nd class hardwood edging all around.

Drawer all as specified and shown on drawings.

Removing/Taking out carefully following old unserviceable worn out/components parts of TABLE 900 X 600 X 760 MM WITH OUT DRAWER (FD 42M) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Leg made out of 2 nd class HW .

Stiffner 25 x 40 mm made out of 2nd class HW .

Table top 900 x 600 mm 18 mm thick prelaminated particle board with 4 mm thick 2nd class hardwood edging all around.

Removing/Taking out carefully following old unserviceable worn out/components parts of CHAIR EASY (FD-17 M, FD-229) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Front Leg made out of 2nd class HW .

Rear Leg made out of 2nd class HW ..

Rail with necessary holes for canning made out of 2nd class HW ..

Arm rest made out of 2nd Class HW .

Removing/Taking out carefully following old unserviceable worn out/components parts of CHAIR WRITING (FD-280,FD-250) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.

Front Leg made out of 2nd class HW all as specified.

Rear Leg made out of 2nd class HW all as specified.

Stiffner made out of 2nd class HW all as specified.

Rail with necessary holes for canning made out of 2nd class HW all as specified.

Arm rest made out of 2nd Class HW as per specified.

Removing/Taking out carefully following old unserviceable worn out/components parts of CHAIR WOODEN BOTTOM(FD-285, FD-56 M) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing

Front Leg made out of 2nd class HW all as specified.

Rear Leg made out of 2nd class HW all as specified.

Stiffner made out of 2nd class HW all as specified.

Seat 6 mm thick plywood 5 ply made out of 2nd class HW all as specified

Sofa Set 05 Seater FD-234 M & L repair to sofa set 5 seater consisting ( single seater with arms 2 nos, single seater without arms 3 nos) by taking out old unserviceable cloths foam, spring etc. and replacement with new tepastry cloths, hessain cloth, foam 20 mm thick, steel spring 150 mm height for seat, steel spring 100 mm height for back including aplying one or more coats of French polish to legs after preparation of surfaces complete all as specified and shown on drawing(FD-234).

All as per serial item No. 13 above but of 4 seater (single seater with arm 2 Nos and single seater without arm 2 Nos )(FD-234).

Removing/Taking out carefully following old unserviceable worn out/components parts of TABLE CENTRE FD 235 & FD 274 and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing

Table top 900 x 450 mm 18 mm thick prelaminated particle board with 4 mm thick 2nd class hardwood edging all around.

Leg made out of 2 nd class HW all as specified.

Side rail of 2nd class HW all as specified.

Removing/Taking out carefully following old unserviceable worn out/components parts of TABLE WRITING (FD-275) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing

Leg made out of 2nd Class HW all as specified.

Stiffner made out of 2nd Class HW all as specified.

Door shutter 18 mm thick plywood BWR grade with 1 mm thick laminated sheet fixed with adhesive and 4 mm thick 2nd class HW edging all around all as specified.

Drawer all as specified and shown on drawings.

Table top 1200 x 600 x 18 mm thick prelaminated particle board with 4 mm thick 2nd Class HW edging all around all as specified.

Material and labour for painting of name plate on old painted plastered surfaces of size 15" long x 12" high with synthetic enamel black paint on back ground and writing letters ( Name and unit of officer) with white paint, of size 40mm in height of letter as per existing pattern and as directed by engineer-in-charge complete.

Removing unsericeable cane from various types of chairs and re-canning the same with new Plastic Cane 2mm wide Oval Type in white colour and border with 4 mm wide, complete all as specified/shown on drawing

S&F francy type brass knobs suitable for drawers of wooden furnitures.

POLISHING Removing of all old faded out polish by polish remover/scrapper or by caustic soda or by any other means without damaging surfaces of furniture as listed below, making the surface smooth and free from dust and applying high gloss french polish till glossy/shine finish obtained all as specified and directed.

Bed plywood Top (FD-246)

Side Board (FD 26)

Chair Dining (FD 228, FD279)

Chair Easy (FD 17, FD 229)

Chair Writing. Drg No FD-250 & FD-280)

Chair W/B without arm. Drg No FD-280 & FD-56M)

Peg Table ( FD 236, FD 277)

Sofa Set of 5 Seater (FD 281)

Sofa set of 4 Seater ( FD 281)

Stool dressing (FD 227, FD 282)

Teapoy (FD 278)

Table Centre ( FD 235, FD 274)

Table writing (FD 33, FD 275)

Chair Dining MAP (FD/MAP/02)

Table 900 x 900 x 760 mm with drawer (FD/283/224)

Table 900 x 900 x 760 mm without drawer (FD/42M)

Table Bed Side (FD 275)

Table Office officer wooden (DB-4110)

Table Office clerk wooden (DB-4120)

Manufacture and supply of Bed hard Offrs complete all as specified and shown on drawing (Drg No . FD/MAP/01) (10 Wing) (5AFH)

Manufacture and supply of Chair computer complete all as specified and shown on drawing (Drg No . FD/E6/MAP/01)

Manufacture and supply of Table computer complete all as specified and shown on drawing (Drg No . FD/E6/MAP/03) Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

M/S DHAR AND DHAR

M/S SANTOSHI TRADERS

M/S N M TRADERS

AJOY DUTTA CHOWDHURY AND CO

Bidder Name

M/S N M TRADERS

AJOY DUTTA CHOWDHURY AND CO

M/S GOSWAMI BROTHERS

M/S DHAR AND DHAR

M/S SANTOSHI TRADERS