NIT18/E/2026-27/EE/CHD/SL02

Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. I) By Manual Means A) In area of light jungle

Restoration of Rain Cuts , Restoration of rain cuts with soilmoorum, gravel or a mixture ofthese, clearing the loose soil, benching for 300 mm width and extending continuously for a sufficient length and height of benches shall be in the range of 150- 300mm. Fresh material shall be deposited in layers not exceeding 250 mm and compacting with plate compactor or power rammers or by suitab le implements handled manually to restore the originalalignment, levels and slopes as per the requiremnt of MORT&H's specification 3002.

Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). i) On bituminous surface @ 0.25kg /sqm Using Cationic RS-I (Packed))

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510). Mechanical method using approved grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour. Including Tack Coat RS-I @ 0.25 Kg/Sqm. 13.20 mm Stone Chips = 0.018 m3/m3 11.20 mm Stone Chips = 0.009 m3/m3 Cost of Bitumen (Bulk): VG-30= 1.46 Kg

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type B seal coats (Reference to MORT&H's specification clause 511) 12(i) suitable approved grade. Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. 13.20 mm Stone Chips = 0.36 m3/m3 VG-30 (Bulk)Bitumen - 0.68 kg m2

Fog Spray Providing and applying low viscosity bitumen emulsion (SS1) for sealing cracks less than 3 mm wide or incipient fretting or disintegration in an existing bituminous surfacing (Reference to MORT&H's specification clause 513). Without aggregate. SS-I @ 0.75 Kg/Sqm

Add GST@18% on Rs . 2397085.00 i.e. total amount over item no1 to 7