GE/PNH-45/2024-25

Amount

B&R PORTION:- Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exc 4 Sqm, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm , complete all as specified and directed.

Demolition of cement concrete (unreinforced) on ground floor or paving not exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or other than fair faces of brick work or on one side of lathing, finished even & smooth without using extra cement, complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on stone masonry surfaces or other than fair faces of brick work or on one side of lathing, finished even & smooth without using extra cement, complete all as specified and directed.

Supply only liquid water proofing admixture complete all as specified and directed.

M&L for mirror polishing on marble/ granite/Kota stone/ stone work whereever required to give high gloss finish incl necessary repairs if reqd after each cutting i.e. filling of joints with white cement and pigments to the entire satisfaction of Engr-in-Charge complete all as specified and directed.

All as per srl item No. 08 Above but on vertical surfaces, complete all as specified and directed.

M&L for preparation of new plastered wall surfaces , and applying two coats of white wash on walls including cornices, pilasters etc, complete all as specified and directed.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete, complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and as directed.

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one , complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 50mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 with (using 12.50 mm graded crushed stone aggregates) as in flooring, sub base of flooring etc complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 with (using 40 mm graded crushed stone aggregates) flooring, finished even and fair, complete all as specified and directed.

M&L for machine cut Kota stone slab flooring in single piece 20-25mm thick of size 55 cm x 55 cm, bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, laid over and including screed bed or bedding layer of mortar 20mm thick in Cement Mortar (1:6) including cutting, incl dismantling of existing stone slab and grinding and polishing to match with existing shade, complete all as specified and directed.

M&L for Plain cement Concrete 1:2:4 type-B1 (using 20mm graded crushed stone aggregate) as in copings, hold fasts plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work,complete all as specified.

S&F aluminium anodised, barrel tower bolts of extruded section of size 150mm complete all as specified and directed.

S&F aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and directed.

M&L for 10 mm thick coloured endura tiles of size exc 0.18 sqm laid in floor with neat cement slurry pointed with matching pigments white or colour with 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for machine cut Kota stone 20-25mm thick on vertical surfaces such as skirtings, dados and risers to steps etc., bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, laid over and including screed bed or bedding layer of mortar 20mm thick in Cement Mortar (1:6) including cutting, grinding and mirror polishing, complete all as specified and directed.

M&L for machine cut Kota stone slab in flooring 20-25mm thick , bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, laid over and including screed bed or bedding layer of mortar 20mm thick in Cement Mortar (1:6) including cutting, grinding and mirror polishing, complete all as specified and directed.

M&L for complete removal of existing treatement from wall plaster and finishing walls and applying two coats of oil bound distemper over and including 1 mm thick wall care putty, complete all as specified and directed.

M&L for complete removal of existing treatement from wall plaster and finishing walls with acrylic smooth exterior paint of required shade, applying two or more coats @ 1.67 ltr/10 sqm over and incl priming coat of exterior primer apply @ 2.2 kg/10 sqm, complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement complete all as specified.

M&L for providing 20 mm dia, 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches, complete all as specified and directed.

Taking up or down steel tubing of 15 mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

M&L for providing 25 mm dia, 3- layer PP-R Polypropylene random co-polymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches, complete all as specified and directed.

Taking up or down steel tubing of 20 mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Taking down existing tarfelt including tiles and Demolition of lime / cement concrete & screed bed complete from roof surfaces including parapets and lowering without disturbing the existing RCC roof slab and removing the same to a distance exc. 50m and n. exc. 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc., complete all as directed and directed.

M&L for 15mm thick screed bed or bedding layers in cement mortar (1:4) with mixing of water proofing compound @ 3% in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane and finished the surfaces even and smooth without using extra cement, complete all as specified and as directed. (NOTE : Polymeric membrane & WPC shall be measured and paid separately under relevant item of this Schedule 'A').

M&L for water proofing treatrment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bitumenous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof including parapet surface. (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3mm thick, weight not less than 3 Kgs per Sqm reinforced with non woven polyester febric, weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) APP bassed polymeric membrane shall be "Dr Fixit" manufacturered by(i) M/S Pidilite Industries (ii) M/S Texsa India Limited (iii) IWL India Limited (c) Applying two coats of Aluminium paint over APP membrane.)

Dismantling water tanks of any description and removing from site of capacity exc 500 ltrs & not exc 1000 litre, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with threaded closed top) hoisted and fixed in position all as spd in SSR Pt-I, of capacity 1000 Ltrs incl, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in repair 20mm dia PVC ball brass valve high pressure with polyethylene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n exc. 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for glazed ceramic coloured tiles (450x300mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.

M&L for chequered cement concrete tiles 300x300x 25mm thick, set & jointed in neat cement slurry in floors and pointed with grey cement mixed with pigments, laid over and including 20mm thick screed bed in CM 1:6, incl dismantling of old tiles, complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1 with (using 20 mm graded crushed stone aggregates) as in flooring finishing the surface even and smooth without using extra cement, complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) complete all as specified and directed by Engineer-in-Charge.

S&F mild steel butt hinges 100 mm long, medium weight, cold rolled, complete all as specified and directed.

S&F factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc. with one shop coat of primer complete all as specified and directed.

S&F 2nd class hard wood, 35 mm thick, glazed and skeleton shutter, divided into square, with plain, chamfered or rounded mitered and rebated sash bars, any number of panels, prepared to receive glass, gauge etc. edges of frames chamfered or rounded, fitted with cut and mitered beads for securing glass etc. size of members as specified in SSR Part I clause 8.24 (b) kiln seasoned and chemically pressure treated, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint of Ist quality to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint of Ist quality to old steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint of Ist quality to old wooden surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm with tinned tacks or galvanised wire stapple, complete all as specified and as directed.

S&F in repair PVC valve less syphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints complete all as specified and directed.

S&F in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed for iron pipe, complete all as specified and directed.

S&F in repair Bib tap 15 mm bore, Brass CP, cast copper alloy, fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair Stop / Angle cock (ISI Marked), cast copper alloy, fancy type, chromium plated with capston head, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified and directed.

S&F in repair Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with brackets, flush pipe, waste pipe grating and union for discharge pipe, complete all as specified and directed.

S&F in repair Vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl brackets, waste pipe & CP waste coupling ,complete all as specified and as directed.

S&F in repair PVC connection 15 mm bore with CP nuts of length 600 mm long, complete all as specified and as directed.

S&F in repair Grating doom 100 mm dia with waste hole of PTMT (minimum weight - 40 gms) complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with 'P' or 'S' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and syphonage pipe etc. including lime concrete bedding, complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces & finished even & smooth w/o using extra cement, complete all as specified and as directed.

M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sqm in sunken portion, complete all as specified and directed.

M&L for Loose filling with aggregates of broken bricks of gauge 80 to 150 mm in sunken portion, complete all as specified and directed.

M&L for polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm, complete all as specified and directed by Engr-In-Charge.

S&F High density polyethylene pipes (HDPE) of dia 50 mm of pressure rating 6 kgf/cm2 as a spot pipe in sunken portion, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete or cast iron) set in cement mortar and taking out of trenches, complete all as specified.

S&F in repair PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing to waste pipe with solvent cement fixed, complete all as specified.

S&F in repair PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe including clamps, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe including clamps, complete all as specified and directed.

S&F in repair PVC (SWR) bend, 75 mm any radius, complete all as specified.

S&F in repair PVC (SWR) bend, 110 mm any radius, complete all as specified.

S&F in repair PVC (SWR) branch piece, single, 75 mm (single Y) equal or unequal, complete all as specified.

S&F in repair PVC (SWR) branch piece, single, 110 mm (single Y) equal or unequal, complete all as specified.

S&F in repair PVC (SWR) junction single, 75 mm (single T) equal or unequal, complete all as specified.

S&F in repair PVC (SWR) junction single, 110 mm (single T) equal or unequal, complete all as specified.

S&F in repair PVC (SWR) vent cowl 75 mm bore, complete all as specified.

M&L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified.

M&L for 1.5 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap, complete all as specified and directed by Engg-in-charge.

S&F in repair brass CP soap dish with poly carbonate dish fixed to wall with brass screws, complete all as specified and directed.

S&F in repair sheet glass shelf 600 mm long with chromium plated bracket guard and railing fixed to wall with brass screws, complete all as specified and directed.

S&F in repair brass chromium plated overhead shower 200X200mm single flow self cleaning type with CP fancy type shower arm made to shape, complete all as specified and directed.

S&F plywood, 19 mm thick, action tessa termite proof and water boiling proof plywood best quality, type BB, fixed with screws to timber frame, fixed with gypsum screws, complete all as specified and directed. Note - All cut edges of board to be sealed with 6mm 1st class H.W beading fixed with head kess nails including necessary polishing.

S&F plywood, 6 mm thick, action tessa termite proof and water boiling proof plywood best quality, type BB, fixed with screws to timber frame, fixed with headless nails, complete all as specified and directed.

S&F 100 mm long round stainless steel legs fixed with screws at the bottom of cupboards to maintain ground clearance, complete all as specified and directed.

S&F magnetic catchers fixed in cabinets with screws, complete all as specified and directed.

S&F stainless steel handles 200 mm long fixed to wooden shutters, complete all as specified and directed.

S&F in repair 15mm bore pillar tap, fancy type, chromium plated, screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed for iron pipe, complete all as specified and directed.

S&F in repair 15mm bore gun metal globe or gate valve (ISI marked), cast copper alloy with iron screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union of dia 20 mm , complete all as specified.

E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light/fan point controlled by one way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

One light/fan point controlled by two numbers two way switches, 6 Amp complete all as specified and directed.

All as per srl item No 95 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.

S&F ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC/poly carbonate, insulated body, complete all as specified and directed.

S&F switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F switch piano flush type 6 Amp single pole two way, (ISI marked), complete all as specified and directed.

S&F socket outlet 2 in 1, 5 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F Switch socket combination, 5 pin, 5 Amp flush type universal, complete all as specified and directed.

S&F Switch socket multipurpose combination 2 in 1, 5 pin, 5 and 15 Amp flush type universal, complete all as specified and directed.

S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and fixing in repair inverter LED lamp, CDL 12 watt, B22 base, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.

Supply and fixing in repair inverter LED batten 1x 20W, with square profile and polycarbonate channel, lithium iron battery with charging time of 8 to 10 hours and backup tile upto 04 hours with driver, holder incl LED tube light connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. all as specified and directed.

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver including suitable bracket fixed to wall/ pole complete with IP 65/66 protection complete all as specified and directed.

S & F in replacement of BLDC ceiling fan complete with blades of capacity 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, 5 star rated, 230 V, 50 Hz with all connecting accessories, complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, vertical TPN double door (IP43), 4 ways built in bus bars suitable for 415 volts, AC, 50 Hz and suitable for FP MCCB as incommer and out going SP/TP MCBs complete all as specified and directed. Note:- MCBs shall be measured and paid separately.

S&F in repair geyser of capacity 25 ltrs 5 star rated ISI marked horizontal storage type including all accessories such as safety valve, thermostate, NRV, connection pipes etc including making good and matching existing surface and finish complete all as specified and directed.

S&F in repair single pole and neutral enclosure with a two pin and metal earth plug and socket complete with & incl one single pole MCB of 20 Amps complete all as specified and directed.

Taking out old unsv exhaust fan from site and replacement of exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers incl all connecting accessories complete all as specified and directed by Engineer-in-charge.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 12 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair MCCB TPN, 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 10 KA complete all as specified and directed.

S&F in repair MCB SPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed.

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed.

S&F Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.

S&F Sub main wiring with single core cable 2x 6 Sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing caping medium grade alongwith 1x 6 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, complete all as specified and directed. Note:-Three wire of 6 sqmm and one run of PVC conduit/casing caping shall be measured as one unit.

Supply and laying in trenches/on floor/pole or under road/culvert 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 25 Sqmm 4 core, incl taking out old unsv cable, complete all as specified and directed.

Exc in trenches not exc. 1.5 m wide and not exc. 1.5 in depth for foundation of poles, stay assy etc. and getteing out in hard/dense soil, complete all as specified and directed.

Returing filling in cluding spreading levelling watering and well ramming in layer not exc 25 cm thick each, complete all as specified and directed.

Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point of any type of soil, complete all as specified and directed.

Supply, laying and fixing DWC HDPE pipe for protection of power cable (orage in colour) of size 50mm dia complete with fitting and including cutting, jointing and clamping , complete all as specified and directed.

narayan construction (BID ID -3149714)

M/S MANHAS ENTERPRISES (BID ID -3142973)

JAMWAL CONSTRUCTION CO (BID ID -3140668)

SUNIL KUMAR SANGEET KUMAR AND SONS (BID ID -3141049)

VIKAS ENTERPRISES (BID ID -3146822)