REPAIR/ REPLACEMENT OF BRICK WORK, JOINERY, ROOF SHEET, FALSE CEILING, WALL PANELLING, WATER SUPPLY, SANITARY FITTINGS, PVC WATER TANKS,

Amount

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc, of any height (G Floor to 3rd Floor) including necessary scaffolding and T&P required to complete the work complete all as specified and as directed.

Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed.

M & L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan to any radius in half brick thick wall built complete all as specified and directed.

M&L for rendering 15 mm thick in cm (1:6) on brick work or concrete surfaces finished even and smooth complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair surfaces of brickwork or concrete surface in cement mortar 1:4 finished even and fair mixed with WPC as per manufacturer's instructions at any height including necessary scaffolding etc. complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a one coat of birla white putty 1-2mm thick on walls complete all as specified and directed.

M&L for preparing of new plastered surface walls and applying two coats of weather proof paint on external surfaces over and including a coat of alkali resistant priming paint at any height including necessary scaffolding etc. complete all as specified and as directed.

Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for rendering/screed bed 20mm thick in CM 1:3 in (Sunken slab) mixed with water proofing compound as per manufacturer instruction's surface shall be finished even and smooth without extra cement complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm icluding cleaning surfaces etc complete as in sunken portion complete all as specified and directed.

M & L PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in filling and mass concrete complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including taking down complete all as specified and directed.

M&L for 10mm thick cement plaster in cement mortar 1:3 on roof slab mixed with water proofing compound as per manufacturer instruction's surface shall be finished even and smooth without extra cement complete all as specified and directed. Note: Water proofing compound will be measured and paid separately.

M&L for preparation of plaster surfaces /RCC roof surfaces and applying one coat of bituminous primer @0.30 ltr/sqm complete all as specified and directed.

M&L for PCC 1:2:4, type C-1, Using 20mm graded crushed stone aggregate as in coping, block for hold fast block or similar work and finished the surface with existing and including form work complete all as specified and directed.

Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified and directed.

Demolition of cement concrete in ground floors or pavings n.exc 15cm thickness below or above ground level complete all as specified and directed.

M &L 75mm thick for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in sub base , plinth protection & paving finished even & smooth without using extra cement.

M&L 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in sub base for laying floors finishes complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.18 sqm but n exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) joint free area of each tiles exceeding 0.18 sqm but n exc 0.38 sqm in verical surface such as dado/lkirting set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and incl 10mm thick rendering in cment mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm, 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade (square / rectangular) of 8 to 9mm thick, double charged/ Ultra charged, of size 600x600mm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl screed bed of 20mm thick in CM (1:6) complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade (square / rectangular) of 8 to 9mm thick, double charged/ Ultra charged, of size 600x600mm as in skirting, dado and riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles fixed over and incl rendering 10mm thick in CM (1:4) complete all as specified and directed.

S & F 1.5mm thick PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, homogeneious laid with approved rubber based adhesive in floors (incl dismantling of old PVC sheet from floor and removing from site) complete all as specified and directed.

M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish pre polished glossy finish 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of stone slabs and tiles of any description laid beded and pointed in any mortar or thickness in floors, aprons etc. complete all as specified and directed.

M & L for granite (of any type) 20 mm thick one side machine polished in steps, jambs, pillars, window Cills, and top of kitchen platform and top of counter top wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match fixed over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) including laid over 12mm thick in cement mortar (1:3) and ointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in , cooking platform, and other similar situations complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets or GI grid frame work complete all as specified and directed.

M & L for 4mm thick non asbestos fibre cement building boards (self designer with PVC white coating) fixed or laid/ inserted to timber/GI/ Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.

M&L for GI frame work (bottom prepainted and puetyelene coated) of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall and false ceiling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition)of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L reinforced cement concrete 1:2:4. type B-1, as in columns/beams/slab, landings, chhaja and in shelves and the like complete all as specified and directed.

M&L for formwork flat rough finished surfaces of concrete to soffits of suspended slabs, roof slabs, landings and similar work complete all as specified and directed.

S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed.

S&F pre-engineered galvalume aluminium zinc coating GI based profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-engineered galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S & F 0.63 mm thick galvanized, corrugated mild steel sheeting with two corrugation side lap in roofs with grade of Zinc coating 120 gm per sqm fixed with self-tapping screwscomplete all as specified and directed.

S & F 0.63 mm thick plain galvanized mild steel sheeting in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of Zinc coating 120 gm per sqm, bent to shape as required, fixed with self-tapping screws complete all as specified and directed.

Taking down chowkat or frames with shutters withoutout taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm each and n exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in the same opening after repairs complete all as specified and directed.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F flush shutters, 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides with lipping/frame to match complete all as specified and directed.

S & F 35mm thick IInd class hard wood plain framed, panelled shutters (any numbers of panels), with panels of timbers flat on bith sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S & F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. edges of framaing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. sized of members of shutter with three number of pannels complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel ventilators, with top hung shutter including hinges steel peg stay, complete all as specified and directed.

S&F block board 18/19 mm thick, grade 2 quality, 'interior grade', decorative type with decorative face veneer on one face, fixed with nails/ screws sin cup board shutter/ pelmets etc. or to timber frame work, fixed in repairs including 6mm thick teak wood lipping complete all as specified and directed.

S&F hasp and staple, safety type,of aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size, complete all as specified and directed.

S&F in repairs for continuous piano hinges mild steel bright finish or electrogalvanized with open flap width 30 mm, complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed.

S & F sheet glass ordinary quality 3mm thick glazing in square/ rectangle n,exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden frame at any height including necessary scaffolding etc. complete all as specified and directed.

S & F sheet figured glass quality 3mm thick glazing in square/ rectangle n,exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden frame at any height including necessary scaffolding etc. complete all as specified and directed.

S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed.

S & F in repair 300mm ordinary rat rail pattern springs including roller and roller plate complete all as specified and directed.

S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size complete all as specified and directed.

S&F Butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type B-21 complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of size 100mm long complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

S & F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, anfle, channel or flat sections) including distance pieces cleats Fe 410-W(Gde-E- 250) quality-A etc complete all as specified and directed.

S&F framed work as in doors frame/chowkats or gates of angle or other section with gusset plates , rails , braces etc complete cutting , drilled and welding for fixing of steel sheeting etc Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, framework of watertanks and similar work conforming to Fe-290. Gde-E-165. complete all as specified and directed.

M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed.

Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed.

Refixing old steel tubing 15mm dia and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.

Refixing old steel tubing 20mm dia and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore complete all as specified and directed.

S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 500 ltrs capacity 3 layered (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismantling of existing tank complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 1000 ltrs capacity 3 layered (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismantling of existing tank complete all as specified and directed.

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screw for iron pipe minium weight for 210 gms complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 250 Ltr nexc. 500 ltr complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of cap exc. 500 Ltr nexc. 1000 ltr complete all as specified and directed.

S & F 21-22 inch dia galvanised mild steel pan mortar (Tasla/ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer including fixing on water storage tank as tank cover complete all as specified and directed.

M&L cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltr complete all as specified and directed. Note : Any damage to float valve, pipe etc shall be make good by the contractor without any extra cost.

M&L cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 500 Ltr and nexc. 1000 ltr complete all as specified and directed. Note : Any damage to float valve, pipe etc shall be make good by the contractor without any extra cost.

S&F in repair 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or btter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or btter fly handle screwed both ends for Iron pipe or for unions complete all as specified and directed.

S & F in repair 15mm bore concealed stop valve fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for unions pipe complete all as specified and directed.

S & F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S& F in repairs 15mm size PVC connection pipe with PTMT nuts of length 600mm long complete all as specified and directed.

S & F in repair 15mm brass CP wall mixer for mixing hot and cold water with hand shower complete all as specified and directed.

S & F 15mm brass CP basin mixer for mixing hot and cold water complete all as specified and directed.

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges ccomplete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan padestal pattern white complete all as specified and directed.

S & F in repairs plastic water closet seat cover white/ coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs vitreous china wash down water closet white 580x440 mm (squatt pan) orrisa pattern incl provn of lime concrete bedding P or S trap with integrated foot rest (excl flushing cistern) complete all as specified and directed.

S&Fin repair PVC low level flushing cistern 10 Ltr capacity valveless symphonic action type white as approved with ball valve flat back & handle including brackets complete all as specified and directed.

S&F in repairs wash basins, vitreous china (flat back or angle back type) size 550x400mm white , incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling and waste pipe of standard length complete all as specified and directed.

S & F in repair 15mm pillar tap CP cast copper alloy with capstan head screwed down high pressure with or without lettered hot or cold with long shank and fly nuts fancy type complete all as specified and directed.

M&L 20 mm dia mild steel coloured PVC coated fancy curtain rod complete all as specified and directed.

M&L for mild steel coloured brackets including PVC designer dom for curtain rod complete all as specified and directed.

S & F in repairs 100 mm bore cast iron bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S & F in repairs 75 mm bore cast iron bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repairs 100 mm dia cast iron floor trap with SS grating incl jointing to waste pipe fixed in PCC 1:2:4, type B-I, complete all as specified and directed.

S&F in repairs 75mm dia cast iron floor trap with SS grating incl jointing to waste pipe fixed in PCC 1:2:4, type B-I, complete all as specified and directed.

S & F in repair stainless steel plate rack for kitchen of size 750 x 600 x 250mm, made of min 1.00 mm thick sheet fixed with stainless steel screw and rawl plug complete all as specified and directed.

S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling/ waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Pankaj Builders