PROVISION OF TOILET AND ADDITION ALTERATION TO WORKERS CANTEEN BLDG NO P2 AT RNDE ENGRS DIGHI PUNE

Amount

Schedule 'A' Part - I (BUILDINGS AND STRUCTURES) This Schedule (contains under mentioned Sl. item No. 1.01) is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6.

Lumpsum price worked out by the contractor for Construction of Sanitary Block for Workers Canteen complete all as shown on drawings and as per specification.

Lump sum price worked out by the Contractor for “EXCAVATION, EARTHWORK, SITE CLEARANCE AND AREA DEVELOPMENT ” as listed in Schedule ‘A’ Part - II representing _______ % ______________ percent Above / Below the lump sum price of ₹1,00,871.10 inserted by the MES in Schedule ‘A’ Part - II

Lump sum price worked out by the Contractor for “ ROAD / PATH / CULVERT / HARD STANDING ” as listed in Schedule ‘A’ Part - III representing __________ % ____________ percent Above / Below the lump sum price of ₹ 5,83,286.23 inserted by the MES in Schedule ‘A’ Part - III

Lump sum price worked out by the Contractor for “ SEWAGE DISPOSAL ” as listed in Schedule ‘A’ Part - IV representing __________ % ____________ percent Above / Below the lump sum price of ₹3,79,829.21 inserted by the MES in Schedule ‘A’ Part - IV

Lump sum price worked out by the Contractor for " FENCING” as listed in Schedule ‘A’ Part - V representing _______ % __________________ percent Above / Below the lump sum price of ₹84,057.10 inserted by the MES in Schedule ‘A’ Part - V

Lump sum price worked out by the Contractor for "EXTERNAL ELECTRIC SUPPLY” as listed in Schedule ‘A’ Part - VI representing _______ % __________________ percent Above / Below the lump sum price of ₹26,142.40 inserted by the MES in Schedule ‘A’ Part - VI

Lump sum price worked out by the Contractor for "INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - VII representing _______ % __________________ percent Above / Below the lump sum price of ₹28,672.90 inserted by the MES in Schedule ‘A’ Part - VII

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIC SUPPLY ” as listed in Schedule ‘A’ Part - VIII representing _______ % _________________ percent Above / Below the lump sum price of ₹8,59,884.97 inserted by the MES in Schedule ‘A’ Part - VIII

Lump sum price worked out by the Contractor for “ADDITION/ALTERATION OF BUILDINGS" as listed in Schedule ‘A’ Part - IX representing _______ % _________________ percent Above / Below the lump sum price of ₹53,86,604.83 inserted by the MES in Schedule ‘A’ Part - IX

Schedule 'A' Part - X This Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as ₹0.00 indicates this fact only. The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item No. 11.00 to 26.00

S&F in repairs 15mm bore CP brass health faucet of 1.2m long including brass holders, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore CP brass two way bib cock, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Taking down of old unserviceable sub main wiring of any type complete all as specified and directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the distributed surfaces to match with the existing finishes complete all as specified and directed.

S&F, 18/20 watts basic all purpose surface and wall mounted 4 feet LED batten with aluminium housing and integrated electronic driver including all fixing accessories and connected with 3 core white insulated copper cable to the ceiling rose complete all as specified and directed.

S&F, ceiling fan down rods 1.0m long of 15mm dia GI pipe to the existing trusses of any height including necessary welding and fixing with clamps and nut bolts etc, complete all as specified and directed.

S&F, 10 watts basic all purpose surface and wall mounted 2 feet LED batten with aluminium housing and integrated electronic driver including all fixing accessories and connected with 3 core white insulated copper cable to the ceiling rose complete all as specified and directed.

Taking down carefully after disconnecting electrical / water supply connections and carryout the servicing / over hauling of the storage type electric water heaters (Geysers) of storage capacity 25/50 litres of any make / type by cleaning the inner surface of the tank / heating element with chemical to remove the scaling / rust, replacing worn out parts and reassembling the same after servicing, applying two coats of synthetic enamel paint after preparation of surface complete and refixing on its original position including testing complete all as specified and directed.

S&F, LED efficient recessed mounting fitting 2' x 2' luminaire to enhance the delight of occupents with comfortable experience through its classic design and glare free soft illumination complete all as specified and directed.

S&F, MCB DB VTPN 4 ways with metal double door, IP 43 protection suitable for MCCB as incommer and MCB as outgoing, VTPN DBs 415 volt, 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distributed wall / surface all as required at site complete all as specified and directed by Engineer-in-Charge.

S&F, LED street light 30 W buidling security light pressure die cast aluminium housing LED street light lumanires with IP 66 and bracket, nut, bolt, clamp etc, complete all accessories and fixing arrangement all as specified and directed by Engineer-in-Charge.

S&F, plastic body exhaust fan, AC single phase, 240 V of size 200mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and directed.

Taking down carefully unserviceable XLPE cable any type and size completely and making good disturbed surface complete all as specified and directed.

Supply & laying 50mm outside dia Double Wall Corrugated pipe (DWC) ISI mark for enclosing cable below ground / road surface to a required depth including suitable size couplers for jointing of pipe all as per site requirement.

M&L for cutting of bituminous road / floor for laying of pipe / cables n exc 30cm wide and n exc 60cm deep including refilling / with material and watering well ramming / compacting and making good with PCC 1:2:4, type B1, 100mm thick complete all as specified and directed by Engineer-in-Charge.

M & L for Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground ( earth pit not less than 2.25 mtr below normal ground level ) with top edge of the plate vertically to a depth of not less than 1.5 mtr deep below normal ground level connection to and including 4mm dia GI earth wire by means of GI bolts, nuts, check nuts, washers, thimble etc earth lead protected by 15mm dia light grade up to 7.5mtrs or up to test point / connecting to DB including providing charcoal and salt all arround the earth plate up to 15cm thickness all as per electrical plate No 3 of SSR Part-I including watering arrangement with GI pipe 20mm dia medium grade and excavation and earth in any strata, returning , filling, ramming and remove of soil to a distance not exc 50 mtr distance and testing on completion.

Mukund Engineers and Contractors

VIRENDRA FABRICATORS