Tender ID

Karnataka

Retender

Works

Roads

IMPEROVEMENTS TO THE ROAD FROM BILIGERE HOBLI SONAHALLI VILLAGE TO JOINING KALKUNDA VILLAGE IN NANJANGUD TALUK,MYSURU DISTRICT (ONE TIME IMPROVEMENT)

Public Works Department

PWD Division Office Mysuru | Karnataka

Amount: ₹4.8 CrCloses: 8 Sept 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published19 Aug 2024
Closed8 Sept 2024
Retendered19 Aug 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 19 Aug 2024

Tender Value

₹4.8 Cr

EMD Value

₹7.2 L

Closing Date

8 Sept 2024, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

G RAJU

Office Number

Work Description

IMPEROVEMENTS TO THE ROAD FROM BILIGERE HOBLI SONAHALLI VILLAGE TO JOINING KALKUNDA VILLAGE IN NANJANGUD TALUK,MYSURU DISTRICT (ONE TIME IMPROVEMENT)

Tender Information

Tender ID

PWD/2024-25/RD/WORK_INDENT12015

Reference Number

PWD/2024-25/RD/WORK_INDENT12015

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Mysuru

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate with UDIN from CA

RequiredKPWD Registration Certificate

RequiredWork Done Certificate for Similar nature work, duly attested by the Officer Not below the rank of E.E.

RequiredBanker Certificate - Line of Credit in the prescribed form

RequiredIncome Tax Balance sheets and Annual Turnover Certificate issued by the CA with Membership No. with UDIN - 2019-20 to 2023-24

RequiredExisting Commitments work details - B-Value - should be furnished duly attested by the concerned Executive Engineer as per Standard Tender Documents

RequiredGST Certificate, Pan Card & Tin Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of eProcurement portal due to internet connectivity issues and technical glitches at bidders end

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The Tender processing fee shall not be refundable.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

Contractor should carryout additional test required to test the suitability of materials.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost.

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.5 of STD tender document Attached

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

All precautions should be taken by the contractor so that there are no damages to such public/ private properties

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public Works Department, Mysore Division, Mysore during office hours on all working days.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The successful contractor should setup material testing laboratory at the work site before commencement of work.

The difference in cost deposited by the lowest successful tenderer (for unbalanced) along with the performance security will be released to the contractor 30 days after the completion of defects liability period.

All the uploaded documents in e-portal should be got verified at the Division office within 3 working days from the stipulated date of opening of Technical Bid by producing the original documents at the Division office, failing which the tender is liable for rejection. No separate communication will be made in this regard.

The returns submitted to the I.T. along with the Profit and Loss account statement submitted to the I.T. Department should be uploaded for the financial turnover criteria as per tender document attested by Chartered Accountant.

Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the bid document only. Otherwise tender is liable for rejection.

For the vehicles / machineries / equipments for which RTO registration is statutory, for such vehicles / machineries / equipments the contractor should upload the Registration Certificate documents issued by RTO. For machineries and other equipments for which RTO registration is not applicable, for such machineries and equipments, purchase invoice document should be uploaded. If there is sale deed for such machineries and equipments, original invoice along with registered sale deed attested by Govt. registered NOTARY should be uploaded. Otherwise tender is liable for rejection.

The contractor who participates in tenders for more than one work for which tenders are invited in this IFT, the tenderer must fulfill all the conditions and criteria cumulatively for the participated works. (ITT Section 3.4)

GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

The success-full contractor should complete the whole work with in 5 months from the date of handing over of site (including rainy season)

The successful Tenderer shall deliver to the Employer a Security deposit in the prescribed form in the favour of the Executive Engineer, Public Works Department, Mysore Division, Mysore given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract.

Contractors should be registered as KPWD Class I Civil Contractor

Rs 1,00,000.00 of the EMD should be paid through e-payment as specified in e-procurement portal and the remaining balance amount of EMD must be produced in the form of Bank Guarantee by uploading the scan copy of the Bank Guarantee. The original copy should be produced at the time of Technical Bid Opening.

The defect liability period for this project shall be total 5 Years (Five) (Initial 2 years DLP without any financial implications and subsequent 3 years DLP nominal maintenance should be carried out as per BOQ)

The GST of 18% will not be paid seperately, the amount put to tender is inclusive of GST Amount.

Regarding Appealing aggrieved contractors may appeal to the prescribed (Appellant) authority within 30 days as per KTTP and appeal should be through e-proc only as per Govt. order No: pwd/572/CRM-2020(E) Bangalore DT.09-10-2020. The same will not be considered if appeal through Letters

Technical Criteria

General

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Mandating satisfactory completion as a prime contractor for at least one similar work to an extent of 50% of the cost of the work, such as Road work of value not less than Rs. 240.28 Lakhs

Work Done Certificate

Executed in any one year the following minimum quantities of work 1) Earthwork Excavation 1,483.61 cum 2)Embankment/Subgrade/Earthen shoulder 22,115.69 cum 3)Granular Sub base 2,820.48 cum 4)WMM 2,140.34 cum 5) MSS/BM/DBM/SDBC/BC of 657.13 Cum, 6) CC/PCC/RCC of 234.44 Cum and 7)Steel of 9.50 tonnes.

Work Done Certificate

Capabilities of Vendor

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded Hot Mix Plant Not less than 40/60 TPH 1 own and 1 Hire, Asphalt Paver Finisher 1 own and 1 Hire, Smooth wheeled roller 1 own and 1 Hire, Asphalt vibratory roller 1 own and 1 Hire, Tipper/HGV 3 own and 3 Hire, Motar Grader 1 own and 1 Hire, Excavator 1 own and 2 Hire, Pugmill1own, Vehicle mounted bitumen sprayer 1own and 1 Hire, Concrete mixer with Hooper 2 own and 2 Hire, Water tanker 1own and 1 Hire

Others -- Critical Machineries

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- Labour Certificate

Financial Status

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs.. 961.11 lakhs)

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs. 288.33 Lakhs (estimated cash flow for 3 months of peak construction period)

Line of Credit

Income Tax Balance sheets and Annual Turnover Certificate issued by the CA with Membership No. with UDIN - 2019-20 to 2023-24

Audited CA Certificate of Annual Turnover

Others

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

List of existing commitments and ongoing works

Others -- List of existing commitments and ongoing works

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹7.2 L

Important Dates

Last Activity

19 Aug 2024

Published

19 Aug 2024

Bid Opening

11 Sept 2024

Download Ends

5 Sept 2024

Pre-Bid Meeting

22 Aug 2024

BOQ Preview

•

IMPEROVEMENTS TO THE ROAD FROM BILIGERE HOBLI SONAHALLI VILLAGE TO JOINING KALKUNDA VILLAGE IN NANJANGUD TALUK,MYSURU DISTRICT (ONE TIME IMPROVEMENT)

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Construction of unlined surface drains of average cross- sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto ...

•

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction.

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

•

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mecha...

•

Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.25 kg/m2 on the prepared granular surface cleaned with mechanical broom

•

(P.No-43, I.No-5.33 PWD SR...

•

Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported t...

•

Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) or 13.2 mm to 0.09 mm (Type-B) aggregates using VG-30 bitumen to requ...

•

Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveyin to work site...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Direction and Place Identification Signs upto 0.9 m2 Size Board.Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67:2012 made of high intensity grade sheet...

•

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etcOrdinary kilometer stone (precast) (P.No-67, I.No-8.16-i...

•

Providing and laying of hot applied thermoplastic compound

•

2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IR...

•

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc 200 m stone (precast) (P.No-67, I.No-8.16-iii PWD SR VO...

•

Construction of Box Culvert (1x1) 1 Vent 210 Mts,300 Mts ,2070 Mts

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Form work for Cement concrete drain works

•

M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.No-16, I.No-2.4.2 PWD SR VOL-1 2023-24)

•

Supplying, Fitting and Placing TMT Fe 550 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

•

(P.No-18, I.No-2.11h PWD SR VOL...

•

Construction of Box Culvert (2x2) 2 Vent 720 Mts

•

Form work for Cement concrete drain works

•

M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.No-16, I.No-2.4.2 PWD SR VOL-1 2023-24)

•

Supplying, Fitting and Placing TMT Fe 550 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

•

(P.No-18, I.No-2.11h PWD SR VOL...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications A. Stone/Bou...

•

Construction of CC Drain

•

Form work for Cement concrete drain works

•

M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.No-16, I.No-2.4.2 PWD SR VOL-1 2023-24)

•

Supplying, Fitting and Placing TMT Fe 550 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

•

(P.No-18, I.No-2.11h PWD SR VOL...

•

Maintenance (5 years)

•

Clearing and Grubbing Road Land. Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earli...

•

Patching of Shallow Paotholes using SDBC Gr II 25mm thick : Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The Cost is inclusive of removing t...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, horing, strutting, barricading, caution lig...

•

Maintenance of Earthen Shoulder (filling with fresh soil) : Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with appropriate ...

•

The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per technical specification Clause 1908.(Common S...

•

Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as perdrawings and technical specification Clause ...

•

Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technica...

•

Electric pole shifting

•

PSC Pole - 9 Mtr Long, 200 Kg WL (Bescom Part-III,Pg 1, I.No 1.06)a Labour (Bescom Part-III,Pg 1, I.No 1.06)

•

11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For RCC Pole (Bescom Part-III, Pg 2, I.No IX a)

•

Labour (Bescom Part-III, Pg 2, I.No IX a)

•

11 kV, 5 KN Composite/Polymeric Pin Insulator (24 mm Dia FRP Rod) (CESC SR 3/ XIX e) (Bescom Part-III, Pg 3, I.No XIX e)

•

LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - MS (Bescom Part-III, Pg 2, I.No XII a)

•

Labour (Bescom Part-III, Pg 2, I.No XII a)

•

1.1 kV Ceramic Pin Insulator With GI pin (Bescom Part-III, Pg 3, I.No XII d)

•

No.8 Strain Insulators (Bescom Part-III, Pg 3, I.No XIX c)

•

ACSR conductor as per IS : 398 (Part - 2/1996)are the latest revision Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM (Bescom Part-III, Pg 3, I.No XX b)

•

Labour (Bescom Part-I...

•

ACSR conductor as per IS : 398 (Part - 2/1996)are the latest revision Weasel ACSR (6/2.59 mm Al+1/2.59 mm St), Std Wt: 128 Kg/KM (Bescom Part-III, Pg 3, I.No XX a)

•

Labour (Bescom Part-I...

•

Guy set with No. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07 (Bescom Part-III, Pg 3, I.No XXIII a)

•

Labour (Bescom Part-III, Pg 3, I.No XXIII a)

•

Releasing and Refixing of RCC Pole - 9 Mtr Long, 145 Kg WL

•

Labour (1341*0.9) (Bescom Part-III, Pg 1, I.No I b)

•

Releasing & Refixing of 11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For RCC Pole

•

Labour (122*1.9) (escom Part-III, Pg 2, I.No IX a)

•

Releasing and refixing of LT 4/2 Pin Cross Arm with clamps, bolts, nuts & washers with brace - MS

•

Labour (122*1.9) (Bescom Part-III, Pg 2, I.No IX a)

•

Releasing & Restringing of ACSR conductor as per IS : 398 (Part - 2/1996)are the latest revision Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM

•

Labour (3299*1.9) (Bescom Part-III, Pg 3, I...

•

Releasing & Restringing of ACSR conductor as per IS : 398 (Part - 2/1996)are the latest revision Weasel ACSR (6/2.59 mm Al+1/2.59 mm St), Std Wt: 128 Kg/KM

•

Labour (2420*1.9) (Bescom Part-III, Pg 3, I...

•

Chescom Charges

•

IMPEROVEMENTS TO THE ROAD FROM BILIGERE HOBLI SONAHALLI VILLAGE TO JOINING KALKUNDA VILLAGE IN NANJANGUD TALUK,MYSURU DISTRICT (ONE TIME IMPROVEMENT)

•

PSC Pole - 9 Mtr Long, 200 Kg WL (Bescom Part-III,Pg 1, I.No 1.06)a Labour (Bescom Part-III,Pg 1, I.No 1.06)

•

11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For RCC Pole (Bescom Part-III, Pg 2, I.No IX a)

•

Labour (Bescom Part-III, Pg 2, I.No IX a)

•

11 kV, 5 KN Composite/Polymeric Pin Insulator (24 mm Dia FRP Rod) (CESC SR 3/ XIX e) (Bescom Part-III, Pg 3, I.No XIX e)

•

Form work for Cement concrete drain works

•

M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.No-16, I.No-2.4.2 PWD SR VOL-1 2023-24)

•

LT 4 Pin Cross Arm with clamps, bolts, nuts & washers with brace - MS (Bescom Part-III, Pg 2, I.No XII a)

•

Labour (Bescom Part-III, Pg 2, I.No XII a)

•

Form work for Cement concrete drain works

•

M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.No-16, I.No-2.4.2 PWD SR VOL-1 2023-24)

•

Form work for Cement concrete drain works

•

M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.No-16, I.No-2.4.2 PWD SR VOL-1 2023-24)

•

Supplying, Fitting and Placing TMT Fe 550 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

•

(P.No-18, I.No-2.11h PWD SR VOL...

•

Supplying, Fitting and Placing TMT Fe 550 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

•

(P.No-18, I.No-2.11h PWD SR VOL...

•

Supplying, Fitting and Placing TMT Fe 550 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications.

•

(P.No-18, I.No-2.11h PWD SR VOL...

•

1.1 kV Ceramic Pin Insulator With GI pin (Bescom Part-III, Pg 3, I.No XII d)

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction.

•

No.8 Strain Insulators (Bescom Part-III, Pg 3, I.No XIX c)

•

ACSR conductor as per IS : 398 (Part - 2/1996)are the latest revision Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM (Bescom Part-III, Pg 3, I.No XX b)

•

Labour (Bescom Part-I...

•

ACSR conductor as per IS : 398 (Part - 2/1996)are the latest revision Weasel ACSR (6/2.59 mm Al+1/2.59 mm St), Std Wt: 128 Kg/KM (Bescom Part-III, Pg 3, I.No XX a)

•

Labour (Bescom Part-I...

•

Guy set with No. 15 Strain Insulator & Concreting materials as per Dwg No. BESCOM/GM/CP/7 Dt: 24.10.07 (Bescom Part-III, Pg 3, I.No XXIII a)

•

Labour (Bescom Part-III, Pg 3, I.No XXIII a)

•

Releasing and Refixing of RCC Pole - 9 Mtr Long, 145 Kg WL

•

Labour (1341*0.9) (Bescom Part-III, Pg 1, I.No I b)

•

Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.25 kg/m2 on the prepared granular surface cleaned with mechanical broom

•

(P.No-43, I.No-5.33 PWD SR...

•

Releasing & Refixing of 11 kV, Horizontal Cross Arm with HT Single Top supports, clamps, bolts, nuts & washers - MS For RCC Pole

•

Labour (122*1.9) (escom Part-III, Pg 2, I.No IX a)

•

Releasing and refixing of LT 4/2 Pin Cross Arm with clamps, bolts, nuts & washers with brace - MS

•

Labour (122*1.9) (Bescom Part-III, Pg 2, I.No IX a)

•

Releasing & Restringing of ACSR conductor as per IS : 398 (Part - 2/1996)are the latest revision Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM

•

Labour (3299*1.9) (Bescom Part-III, Pg 3, I...

•

Releasing & Restringing of ACSR conductor as per IS : 398 (Part - 2/1996)are the latest revision Weasel ACSR (6/2.59 mm Al+1/2.59 mm St), Std Wt: 128 Kg/KM

•

Labour (2420*1.9) (Bescom Part-III, Pg 3, I...

•

Chescom Charges

•

Providing and laying of hot applied thermoplastic compound

•

2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IR...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-4 bid document- 12015 for 495 lakhs.doc

Tender Document • 1.17 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Roads

IMPEROVEMENTS TO THE ROAD FROM BILIGERE HOBLI SONAHALLI VILLAGE TO JOINING KALKUNDA VILLAGE IN NANJANGUD TALUK,MYSURU DISTRICT (ONE TIME IMPROVEMENT)

Public Works Department

PWD Division Office Mysuru | Karnataka

Amount: ₹4.8 CrCloses: 8 Sept 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published19 Aug 2024
Closed8 Sept 2024
Retendered19 Aug 2024