Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹91,210
Closing Date
12 Feb 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Kumara M
Providing additional 66kV Terminal Bay at existing 66/11kV Bylakuppe Sub-station and stringing of 66kV additional SC line on existing DC towers for a route length of 1.565 kms for making LILO arrangement from Bylkuppe tapping point on Kushalnagar-Periyapatna 66kV DC line to existing 66/11kV Bylakuppe sub-station in Periyapatna Taluk, Mysore District on TTK basis
KPTCL/2023-24/EL/WORK_INDENT565
KPTCL/2023-24/EL/WORK_INDENT565
Open
Electrical
Two Tender Document System(Two Cover)
KPTCL SEE Works and Mantainance Circle Mysuru
17 documents required · 15 mandatory · 2 optional
Refer IFB document, clause 11.3 and 11.4 and upload the supporting documents regarding past experience
CONSORTIUM(Limited to a maximum of Two (2) Constituents including the Lead bidder)11.5.3 The Consortium having combined Technical Qualification as at 11.3 & 11.4 along with financial capability as at 11.6 are also eligible to participate in the Bid subject to the following (I) (a) Any one of the Consortium Partner shall meet the Technical Capability prescribed at 11. 3 and 11.4 OR (b) The consortium partners shall individually meet the technical capability prescribed at 11.3 or 11.4 (II) Financial requirement prescribed at 11.6 shall be met by any of the consortium partners or jointly by both the partners of the consortium
GST registration certificate
PAN CARD registration
EPF REGISTRATION CERTIFICATE ISSUED BY CONCERNED
ESI REGISTRATION CERTIFICATE
The Bidder or his consortium partner should possess valid Super grade Electrical contractors License issued by the Government of Karnataka as on the date of opening of techno-commercial bid
Minimum Average Annual Turnover (MAAT) of the bidder for best three years out of last preceding five financial years ending on March or December as the case may be, shall not be less than (Refer IFB)
No Deviation declaration
CA certificate is required to be uploaded by both Bidder and Consortium Partners separately regarding restriction on procurement from a Bidder/Consortium Partner of a country which shares a land border with India in the format as specified in the clause No.1.5 of Annexure - XVII of the Tender document and XXI.A certificate is required to be uploaded by both Bidder and Consortium Partners separately in respect of restriction on procurement from a Bidder/Consortium Partner of a country which shares a land border with India in case of sub-contracting in the format as specified in the clause No.1.6 of Annexure XVII of the Tender document
The Bidder shall stand disqualified if the total value of Works on hand including contract against subject tender if awarded, exceeds 2 times the MAAT (minimum average annual turnover (Refer 11.6.2.4 of IFB)
Letter of Undertaking
Power of Attorney in favor of all the persons signing the documents
The bidder should not have been blacklisted by any Government Department/Power Utilities/Local Bodies of any state. A self declaration in this regard is to be uploaded(refer clasue11.1)
Further, a certificate is to be uploaded by the Bidder agreeing to source the equipment/material for the work from the approved Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India as specified in Annexure - XVIII of the tender document.
₹2,280
₹91,210
22 Jan 2024
22 Jan 2024
14 Feb 2024
29 Jan 2024
TB Supply Providing additional 66kV Terminal Bay at existing 66/11kV Bylakuppe Sub-station and stringing of 66kV additional SC line on existing DC towers for a route length of 1.565 kms for making LILO arrangement from Bylkuppa tapping point on Kushalnagar-Periyapatna 66kV DC line to existing 66/11kV Bylakuppe sub-station in Periyapatna Taluk, Mysore District on TTK basis
CIRCUIT BREAKER SF6 circuit breakers with semi pneumatic/pneumatic operated/Spring type operating mechanism, including mounting structure with rigid, bi metallic terminal connector suitable for singl...
ISOLATORS Isolators including marshalling box and solid core cylindrical post insulators.66 kV, 1250 A,40 KA class double break Electrically cum manually operated isolator with solid core insulators ...
ISOLATORS Isolators including marshalling box and solid core cylindrical post insulators 66 kV, 1250 A,40 KA class double break Electrically cum manually operated isolator with solid core insulators b...
CURRENT TRANSFORMER Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for drake ACSR66 kV class,31.5 KA CT of ratio 400 200/1 1 1A for Line...
SURGE ARRESTOR (Procelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for drake ACSR 60 kV,10 KA, class 2, Normal duty Metal oxide type
Control and Relay Panel Simplex type Control and relay panels complete as per specification66 kV line panel Simplex type
SCADA INTEGRITY Multi Functional Transduce(MFT)
SCADA INTEGRITY Opto Coupler
SCADA INTEGRITY Contact Multiplier Relay
SCADA INTEGRITYTerminal Blocks(Knife)
SCADA INTEGRITY Copper control Cable: 7 core 4sqmm
SCADA INTEGRITY Copper control Cable: 4 core 2.5sqmm
SCADA INTEGRITY Copper control Cable: 10 core 0.5sqmm
SCADA INTEGRITY Copper control Cable: 10 core 1.5sqmm
Station structures66 kV Station Structure fabricated out of galvanised iron. Column type 6T1 with peak
01 nos (0.91 t per Structure)
Station structures66 kV Station Structure fabricated out of galvanised iron. Beam type 6B1
01 no (0.474 t per structure)
Station structures For Bolts & Nuts
MOUNTING STRUCTURES 66 kV Isolators Live point height 4600mm (0.522 MT per structure) , 2 No's
MOUNTING STRUCTURES Current transformer. 66 kV & 11 kV NCT's 0.146 MT per structure) 3 No's
MOUNTING STRUCTURES Lightening arrestors. 66 kV (0.105 MT per structure), 3 No's
MOUNTING STRUCTURES Pedestal insulators. 66 kV (0.127 MT per structure), 4 No's (For bus)
BUS BAR FORMATION Drake ACSR
BUS BAR FORMATION Earth wire 7/3.15mm steel with clamps/lugs
A)Post insulators- Cylindrical solid core as per 1S5350, Part 2 and 3 66KV Class, 1Unit or stack
Disc Insulators and Hardware Single Tension string using 6 units of each 11kV,90KN Disc insulator along with Bolted type Tension Clamp and hard ware suitable for Drake ACSR(66kV side)(String=Nos)
Disc Insulators and Hardware Disc insulator along with Bolted type Suspension Clamp and hard ware suitable for Drake ACSR(66kV side) (String=Nos)
HARDWARES C Type wedge connector suitable for Drake - Drake
HARDWARES C Type wedge connector suitabele for Coyote- Drake (for line side)
HARDWARES Post insulator clamp suitable for Single Drake ACSR 127 bar 76 mm 66 kV
PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 KV class. Size of cable.19 Core 2.5 Sq.mm
PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 KV class. Size of cable.4 Core 6.0 Sq.mm
PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 KV class. Size of cable.4 Core 2.5 Sq.mm
PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 KV class. Size of cable.2 Core2.5Sq.mm
TB Testing Providing additional 66kV Terminal Bay at existing 66/11kV Bylakuppe Sub-station and stringing of 66kV additional SC line on existing DC towers for a route length of 1.565 kms for making LILO arrangement from Bylkuppa tapping point on Kushalnagar-Periyapatna 66kV DC line to existing 66/11kV Bylakuppe sub-station in Periyapatna Taluk, Mysore District on TTK basis
CIRCUIT BREAKER SF6 circuit breakers with semi pneumatic/pneumatic operated/Spring type operating mechanism, including mounting structure with rigid, bi metallic terminal connector suitable for singl...
ISOLATORS Isolators including marshalling box and solid core cylindrical post insulators.66 kV, 1250 A,40 KA class double break Electrically cum manually operated isolator with solid core insulators ...
ISOLATORS Isolators including marshalling box and solid core cylindrical post insulators 66 kV, 1250 A,40 KA class double break Electrically cum manually operated isolator with solid core insulators b...
CURRENT TRANSFORMER Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for drake ACSR66 kV class,31.5 KA CT of ratio 400 200/1 1 1A for Line...
Control and Relay Panel Simplex type Control and relay panels For 66/11 kV Transmission line with Differential Protection
TB Erection Providing additional 66kV Terminal Bay at existing 66/11kV Bylakuppe Sub-station and stringing of 66kV additional SC line on existing DC towers for a route length of 1.565 kms for making LILO arrangement from Bylkuppa tapping point on Kushalnagar-Periyapatna 66kV DC line to existing 66/11kV Bylakuppe sub-station in Periyapatna Taluk, Mysore District on TTK basis
CIRCUIT BREAKER SF6 circuit breakers with semi pneumatic/pneumatic operated/Spring type operating mechanism, including mounting structure with rigid, bi metallic terminal connector suitable for singl...
ISOLATORS Isolators including marshalling box and solid core cylindrical post insulators.66 kV, 1250 A,40 KA class double break Electrically cum manually operated isolator with solid core insulators ...
ISOLATORS Isolators including marshalling box and solid core cylindrical post insulators 66 kV, 1250 A,40 KA class double break Electrically cum manually operated isolator with solid core insulators b...
CURRENT TRANSFORMER Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for drake ACSR66 kV class,31.5 KA CT of ratio 400 200/1 1 1A for Line...
SURGE ARRESTOR (Procelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for drake ACSR 60 kV,10 KA, class 2, Normal duty Metal oxide type
Control and Relay Panel Simplex type Control and relay panels complete as per specification66 kV line panel Simplex type
SCADA INTEGRITY Copper control Cable: 7 core 4sqmm
SCADA INTEGRITY Copper control Cable: 4 core 2.5sqmm
SCADA INTEGRITY Copper control Cable: 10 core 0.5sqmm
SCADA INTEGRITY Copper control Cable: 10 core 1.5sqmm
Site survey, wiring installation, testing and commissioning of RTU, DCU.DCU installation to be done in RTU panel.
Station structures A)i) 66kV Station Tower (verticals 6T1) (0.91MT) 1 Nos
Station structures ii) 66kV Station Beems 6B1 (0.474 MT per structure) 1 Nos
Station structures Bolts and Nuts
MOUNTING STRUCTURES 66 kV Isolators Live point height 4600mm (0.522 MT per structure)2 Nos
MOUNTING STRUCTURES Current transformer 66 kV and 11 kV NCTs 0.146 MT per structure) 3 Nos
MOUNTING STRUCTURES Lightening arrestors. 66 kV (0.105 MT per structure)3 Nos
MOUNTING STRUCTURES Pedestal insulators. 66 kV (0.127 MT per structure)4 Nos (For bus)
BUS BAR FORMATION Formation of Main or Cross bus with Single Drake 66kV(Bay=No)
INSULATORS :A) Post insulators- Cylindrical solid core as per 1S5350, Part 2 and 3 66KV Class, 1Unit or stack
PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 KV class. Size of cable.19 Core 2.5 Sq.mm
PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 KV class. Size of cable.4 Core 6.0 Sq.mm
PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 KV class. Size of cable.4 Core 2.5 Sq.mm
PVC insulated Copper Control Cable with Lugs / Ferrules. 1.1 KV class. Size of cable.2 Core2.5Sq.mm
Earthing:Grounding of equipments with 50x6 mm G I flat and connecting equipments to the earth mat /ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes...
Earthing:Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness 2.75mtrs long with 2 part clamp out of GIFlat 50 into 6 mm continuously welded around the pipe using cast iron w...
Earthing:Supplying and fixing 450mm dia x 450mm height 1.5" to 2" thick Hume Pipe collars (non pressure type) for earth pits including all lead & lifts etc.
TB Civil Providing additional 66kV Terminal Bay at existing 66/11kV Bylakuppe Sub-station and stringing of 66kV additional SC line on existing DC towers for a route length of 1.565 kms for making LILO arrangement from Bylkuppa tapping point on Kushalnagar-Periyapatna 66kV DC line to existing 66/11kV Bylakuppe sub-station in Periyapatna Taluk, Mysore District on TTK basis
Earth work excavation for Foundation by mechanical means for all works and depth upto 3m as per drawing and technical specifications including setting out,shoring, strutting,barricading,caution lights...
Providing and laying in position Cement Concrete for levelling course for all works in foundation.The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and laying in position Cement Concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed wit...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Steel Fabrication:Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,bending, hooking, laping/weldi...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1 isto 6, bed concrete 150mm thick with 1 isto 3 ...
Removing the existing jelly and respreading after the completion of work as per direction of Engineer in charge.
Decommisioning Providing additional 66kV Terminal Bay at existing 66/11kV Bylakuppe Sub-station and stringing of 66kV additional SC line on existing DC towers for a route length of 1.565 kms for making LILO arrangement from Bylkuppa tapping point on Kushalnagar-Periyapatna 66kV DC line to existing 66/11kV Bylakuppe sub-station in Periyapatna Taluk, Mysore District on TTK basis
Dismantling of existing super structure / tower material and dispatching to the nearest MW stores- 66kV TOWER - 02 No.s66kV- A plus 3 DC-02 Nos (2.37 MT)66kV - B plus 0 DC-02 Nos (2.47 MT)
Releasing of the Conductor in the existing line involving about one span after replacement of tower (COYOTE) (230mtr into 3 lines)
Releasing of the Ground wire in the existing line involving about one span after replacement of tower(66 KV)
Line supply Providing additional 66kV Terminal Bay at existing 66/11kV Bylakuppe Sub-station and stringing of 66kV additional SC line on existing DC towers for a route length of 1.565 kms for making LILO arrangement from Bylkuppa tapping point on Kushalnagar-Periyapatna 66kV DC line to existing 66/11kV Bylakuppe sub-station in Periyapatna Taluk, Mysore District on TTK basis
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE B a) Normal Tower Type B (HT)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE B a) Normal Tower Type B (MS)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE B c) 6M Extension to B Type Tower (HT)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE B c) 6M Extension to B Type Tower (MS)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE B d) Stubs for B Type Tower (HT)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE D a) Normal Tower Type D (HT)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE D a) Normal Tower Type D (MS)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE D c) Stubs for D Type Tower (HT)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE D d) 03 No.s of additional box cross arms for 'D+0' type ...
Supply of Bolts, Nuts and washers etc (galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1) TOWER TYPE B a) Normal Tower Type B
Supply of Bolts, Nuts and washers etc., (galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1) TOWER TYPE B c) 6M Extension to B T...
Supply of Bolts, Nuts and washers etc (galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1) TOWER TYPE B d) Stubs for B Type Towe...
Supply of Bolts, Nuts and washers etc (galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1)TOWER TYPED a)Normal Tower Type D
Supply of Bolts, Nuts and washers etc(galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1) TOWER TYPE D c) Stubs for D Type Tower
Supply of Bolts, Nuts and washers etc (galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1) TOWER TYPE D d) 03 No.s of additional b...
Tower accessories : Number Plates
Tower accessories : Danger Boards
Tower accessories : circuit plate (set of 2)
Tower accessories : Phase plate (Set of 3 per tower)
Tower accessories : Copper earth bond 450 mm
Grounding of towers including cost of 40 mm dia 2.5 mm thick, class C G.I. pipe of 3 Mtrs length as per specifications with 50 into 6 mm GI flats 3 Mtr long salt charcoal including excavation charges
Conductor & Earth wire :Coyote ACSR (In Plain terrain)
Conductor & Earth wire :Ground wire Plain terrian
INSULATOR STRINGS WITH CLAMPS ARCING HORNS AND HARDWARE FOR ACSR COYOTE CNDUCTOR Single Tension string of 5 units each along with hard ware for Coyote ACSR and arcing horn
INSULATOR STRINGS WITH CLAMPS ARCING HORNS AND HARDWARE FOR ACSR COYOTE CNDUCTOR Double Tension string of 10 units each along with hard ware for Coyote ACSR and arcing horn
INSULATOR STRINGS WITH CLAMPS ARCING HORNS AND HARDWARE FOR ACSR COYOTE CNDUCTOR Single suspension string of 4 units each along with hard ware for Coyote ACSR and arcing horn
Accessories for Conductor : M S C Joints suitable for Coyote ACSR
Accessories for Conductor : Repair sleeves suitable for Coyote ACSR
Accessories for Conductor : Vibration dampers for Coyote
Accessories for Conductor : P G Clamps suitable for COYOTE ACSR
Accessories for Conductor : Pre formed armour rods suitable for Coyote ACSR
Accessories for Earthwire :P G Clamps suitable for ground conductor
Accessories for Earthwire :Single tension clamps (Bolted type) suitable for ground conductor
Line Erection Providing additional 66kV Terminal Bay at existing 66/11kV Bylakuppe Sub-station and stringing of 66kV additional SC line on existing DC towers for a route length of 1.565 kms for making LILO arrangement from Bylkuppa tapping point on Kushalnagar-Periyapatna 66kV DC line to existing 66/11kV Bylakuppe sub-station in Periyapatna Taluk, Mysore District on TTK basis
Check survey using their own equipment for 66 kV Plain terrain.
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE B a) Normal Tower Type B (HT)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE B a) Normal Tower Type B (MS)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE B c) 6M Extension to B Type Tower (HT)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE B c) 6M Extension to B Type Tower (MS)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE B d) Stubs for B Type Tower (HT)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE D a) Normal Tower Type D (HT)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE D a) Normal Tower Type D (MS)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE D c) Stubs for D Type Tower (HT)
Fabrication and Supply of galvanised 66kV DC Transmission Line Towers(KPTCL-6D-NGML Design)Note:Rate to be quoted on per MT basis 1)TOWER TYPE D d) 03 No.s of additional box cross arms for 'D+0' type ...
Supply of Bolts, Nuts and washers etc (galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1) TOWER TYPE B a) Normal Tower Type B
Supply of Bolts, Nuts and washers etc., (galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1) TOWER TYPE B c) 6M Extension to B Typ...
Supply of Bolts, Nuts and washers etc (galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1) TOWER TYPE B d) Stubs for B Type Tower
Supply of Bolts, Nuts and washers etc (galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1)TOWER TYPED a)Normal Tower Type D
Supply of Bolts, Nuts and washers etc(galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1) TOWER TYPE D c) Stubs for D Type Tower
Supply of Bolts, Nuts and washers etc (galvanised) required for 66kV DC Transmission Line Towers (KPTCL-6D-NGML Design)Note Rate to be quoted on per MT basis 1) TOWER TYPE D d) 03 No.s of additional b...
Setting of stub templates and aliging dismantling and transporation of templates from one location to another location(Loc=No)
Tower accessories Supplying and fixing Gl angle 45 into 45 into 5 mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5mts length each at inner and outer surface of tower...
Tower accessories: Supplying and fixing Barbed wire(Rmtr=No)
Tower accessories : Number Plates
Tower accessories : Danger Boards
Tower accessories : circuit plate (set of 2)
Tower accessories : Phase plate (Set of 3 per tower)
Grounding of towers including cost of 40 mm dia 2.5 mm thick, class C G.I. pipe of 3 Mtrs length as per specifications, with 50 into 6 mm GI flats 3 Mtr long, salt, charcoal including excavation char...
Conductor & Earth wire :Coyote ACSR (In Plain terrain)
Conductor & Earth wire :Ground wire Plain terrian
Accessories for Earthwire :Tack welding of bolts and nuts
Accessories for Earthwire :Clearing of bushes tree branches etc., upto 3 mtr width for check survey 66KV plain terrain
Line Civil Providing additional 66kV Terminal Bay at existing 66/11kV Bylakuppe Sub-station and stringing of 66kV additional SC line on existing DC towers for a route length of 1.565 kms for making LILO arrangement from Bylkuppa tapping point on Kushalnagar-Periyapatna 66kV DC line to existing 66/11kV Bylakuppe sub-station in Periyapatna Taluk, Mysore District on TTK basis
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
technocom_sheet Bylukuppe.xls
Others - Techno commercial sheet • 0.03 MB
Vol IIA 2 of 2.docx
Tender Document • 0.62 MB
ITB -Bylukuppe.docx
Instructions to Tenderers • 0.06 MB
NIT -Bylukuppe.doc
Tender Document • 0.04 MB
ecc -Bylukuppe.docx
Tender Document • 0.04 MB
Vol IIA 1 of 2.docx
Tender Document • 0.33 MB
Vol IIB.docx
Tender Document • 0.28 MB
IFB - Bylukuppe.docx
Instructions to Tenderers • 0.06 MB
Work on Hand details.doc
Others - Work on hand details • 0.06 MB
SCC -Bylukuppe.docx
Tender Document • 0.07 MB
Annexure.doc
Tender Document • 0.19 MB
GCC - Bylukuppe.doc
Tender Document • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .