Special repair to internal roads at Birdhwal, certain locations in MAP Ph-I area and other various locations at Suratgarh Mil Stn

Amount

M&L for preparing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor through air jet to remove all loose dirt etc and applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 05 Kg per 10 Sqm of road surface by sprayer operated on hot pressure mechanism, providing, laying, spreading 30mm thick (consolidated thickness) of premix Semi Dense Asphaltic Concrete (SDAC) with crushed and graded coarse aggregates as per design based on Job mix formula with 5.5% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mixing plant, laying, spreading uniformly by means of Mechanical paver and rolling and consolidating to the required gradient and camber with 8 to 12 tonne power road roller and Vibromax roller to a uniform smooth surfaces complete all as specified and as directed. Notes : (i) Job mix formula shall be approved by CWE. (ii) Paving bitumen primer of Grade VG-10 for tack coat and bitumen of Grade VG-30 for semi dense asphaltic concrete shall be used and shall be procured by the contractor under his own arrangement and at his own cost. (iii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, applying tack coat, providing and laying semi dense asphaltic concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item. (iv) Computerised print out of data of bituminous concrete in automatic and temperature controlled hot mixing plant shall be provided to the GE by contractor.

M&L for repairs to pot holes, not exc 1 square metre each, including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25 mm in depth, on existing road surfaces, and making good applying evenly a tack coat of paving bitumen primer of grade VG-10 at the rate of 05 Kg per 10 Sqm, putting in premixed bituminous macadam with crushed and graded stone aggregate mixed together with 4.5% of paving bitumen of grade VG-30 by weight of total mix, well rammed and sealed with binder 9.8 Kg per 10 sqm, blinded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed including supply of premixed macadam, binder and chipping, depth of pot holes exc 30mm, complete all as specified and as directed. Note : Job mix formula of premix bituminous macadam shall be approved by CWE.

M&L for providing, laying, spreading premix bituminous macadam with crushed and graded stone aggregate mixed together with 4.5% of paving bitumen of grade VG-30 by weight of total mix including heating bitumen to the required temperature, mixing bituminous macadam in automatic and temperature controlled hot mixing plant, laying, spreading by means of mechanical paver and rolling and consolidating to the required gradient and camber (consolidated thickness 75 mm or less) with 8 to 12 tonne power road roller complete all as specified and as directed. Note : Job mix formula of premix bituminous macadam shall be approved by CWE.

M&L for Thermo plastic road marking 2.0 mm thick painting (lines, dashes, arrows, letters etc on new or previously treated road surfaces) with road safety spikeries glass beads including preparation of new or previously treated road surfaces and applying paint by using special applicator machine with heating arrangement complete all as specified and as directed.

Supply & fixing road stud of size 110 x 128 x 30mm, two way reflective, aluminium alloy body, Red or Amber colour, complete all as specified and as directed including dismantling and taking out old unserviceable / broken road stud of any type. Notes :- (i) Road Stud shall be of Model “DA 971’ of make ‘DARK EYE’ or equivalent of make GREENLITE / 3M / TATA BP / Avery Dennison / Alexis / Oscar / DEV / Surya / Sharp Eyez. (ii) Reflector shall be positioned at the best eye guiding level so that drivers shall be warned from a safe distance.

Supply and fixing cat eye solar reflective type of metal body alloy of size 110mm x 120mm x 24mm with PAMA striplens reflector of model No. 'DA 972' of make ‘DARK EYE’ or equivalent in makes mentioned in Appendix 'B' here-in-after fixed with and including MS stud of suitable size as per manufacturer’s instructions complete all as specified and as directed including dismantling and taking out old unserviceable / broken road stud / cat eye of any type.

S&F Solar road Stud of size 125mm x 125mm x 25mm (shank 60 mm), aluminium alloy shell, electronically operated automatically turns ON at night and turns OFF at day, high efficiency mono crystalline solar panel 2.4 V / 0.3 Watt, one Ni-Mh or Ni-Cd rechargeable battery (1.2 V / 1600 MA), six super bright LEDs with 10000 to 18000 mcd (Millicandela), view distance upto 1000m, flash rate 2 Hz, capable to withstand weight upto 10 tonne, unbreakable poly carbonate clear facing designed for maintenance free operation, 100% water proof design according to IP-65, Red or Amber colour, complete all as specified and as directed including dismantling and taking out old unserviceable / broken solar road stud of any type. Notes :- (i) Solar Stud shall be of Model “DA 110 (DHRUV)’ of make ‘DARK EYE’ or equivalent of make GREENLITE / 3M / TATA BP / Avery Dennison / Alexis / Oscar / DEV / Surya / Sharp Eyez. (ii) Reflector shall be positioned at the best eye guiding level so that drivers shall be warned from a safe distance.

S&F dual directional delineator made out of 16 gauge MS rectangular pipe of size 25x68 mm and of length 600mm stove enameled and backed to 120 degree or powder coated, head made out of ABS plastic rectangular moulded with flat face provided with high intensity prismatic reflectors of colour (white/yellow/red) of size 100x125 mm with additional two reflector strips of 25mm wide, delineator shall be fixed in plain cement concrete 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) block of size 300x300x350mm deep, including necessary excavation & earthwork, complete all as specified and as directed including dismantling and taking out old unserviceable / broken delineator of any type. Notes :- (i) Delineator shall be of Model ‘GPL-UBPH-11-56’ of make ‘GREENLITE’ or equivalent of make DARK EYE / 3M / TATA BP / Avery Dennison / Alexis / Oscar / DEV / Surya / Sharp Eyez. (ii) Reflectors shall be positioned at the best eye guiding level so that drivers shall be warned from a safe distance.

Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign board of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to Type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to Class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing one definition/message plate of minimum size 600x200mm made out of mild steel 2mm thick sheet fixed to pole, steel work to be painted with two or more coats of synthetic enamel paint of approved shade over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc., pole fixed in plain cement concrete 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) block of size 450x450x450mm deep including necessary excavation & earthwork, complete as per drawing, specification and direction of Engineer-in-Charge.

Manufacturing, supplying and fixing retro reflective Cautionary /warning sign board of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to Type-IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to Class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing one definition/message plate of minimum size 600x200mm made out of mild steel 2mm thick sheet fixed to pole, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc., pole fixed in plain cement concrete 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) block of size 450x450x450mm deep including necessary excavation & earthwork, complete as per drawing, specification and direction of Engineer-in-Charge.

M/s Baghla trading company

M/s Amit Construction Company