providing electrical services for installation of LED flood lights for Basket Ball court and LED street lights around and along with approach path and Basket Ball Court situated near Directorate of Students Welfare at CCSHAU Hisar

Amount

Wires and Cables (HSR 31.9) (ii) S/E of 3 core PVC copper insulated and sheathed circular flexible wire:- (c) Size 1.00 sqmm (32/0.20 mm)

SHEET STEEL ENCLOSURE: (HSR 31.12(D) Supply and erection of sheet steel enclosures distribution boards suitable for MCBs etc. on wall/existing board/pedestal with rag bolts including bonding to earth:- (ii) Distribution board 2 way Single Pole

(iv) Distribution board 4 way Single Pole

S/E of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide. (HSR 31.13) (ii) Size 40 mm x 40 mm x 6 mm

MINIATURE CIRCUIT BREAKER AND ISOLATOR:(HSR 31.17) Supply and erection of miniature circuit breaker/isolator 240/415 V in the existing distribution board including making necessary connections (a) Miniature Circuit Breakers of 9 K.A. breaking capacity (ii)6-32 amp. SP MCB

(ii) 32 amp. SPN MCB

(ii) 32 amp. TPN MCB

PIPE LAYING: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required :-(HSR 31.21) (xxx) S/E of PVC pipe of 6 Kg. pressure, laid 1 metre below ground level complete including digging refilling of the trenchy with jointing etc. (b) PVC pipe 80mm dia.

EARTHING (HSR 31.22) (i) Earthing with G.I. earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. as required

(iii) Earthing with G.I. earth plate 600mm x 600mm x6mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

(v) Extra for charcoal or coke and salt for GI plate or copper plate earth electrode.

(xi) Pdg. & fixing 25mm x 5mm GI strip in 40mm dia GI pipe from earth electrode as required.

(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15mm dia G.I. pipe from earth electrode as required.

UNDERGROUND CABLES (HSR 31.25) S/E of underground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. (v)2 x 16 sqmm(armoured)

(xxv) 25 sqmm 3.5 core cable (armoured)

(xxx) 120 sqmm 3.5 core cable (armoured)

(xl) 4 x 16 sqmm(armoured)

UNDERGROUND CABLES Supply and erection of underground cable loose in existing pipe or trenches complete with necessary connections.(HSR 31.26) (v)2 x 16 sqmm(armoured)

(xxv) 25 sqmm 3.5 core cable (armoured)

(xxx) 120 sqmm 3.5 core cable (armoured)

(xl) 4 x 16 sqmm(armoured)

S/E of suitable compression type brass cable glands for underground cable (HSR 31.28) (ii) 10 sqmm to 16 sqmm cable 2 to 4 core.

(iii) 25 sqmm to 50 sqmm cable 2 to 4 core.

(v) 120 sqmm to 185 sqmm cable 3 to 3.5 core.

BUS BAR CHAMBER (a) copper S/E of metal clad bus bar chamber made from 1.6mm thick M.S. sheet fixed with rag bolts on wall or on existing pedestal/angle iron frame including bonding to earth, detachable top and bottom painting and necessary connections etc.(Copper bars duly tinned).(HSR 31.31) (ii) 100 amp. 4 bars of 55cm each(cross section 25mmx3mm), chamber over all size 60cm x 45cm x 18cm.

Pedestal S/E of Godrej Almirah type M.S. pedestal made of 50mm x 50mm x 6mm angle iron frame with 3.00mm thick M.S. sheet covering including shutters with suitable hinges and lcoking arrangement with Godrej type handle including round bars. The top covering should have downward overhang of 75mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four Nos. holes to discharge the heat produced by the current. The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof. The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and it’s legs are embedded upto the entire depth in 1:2:4 cement concrete block, projected 75mm all around the pedestal and 200mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work: (HSR 31.33) (vi) M.S.Pedestal of size 1500mm wide, 1800mm high 450mm deep and bottom totally open, duly embedded in cement concrete block of size 1650mm x 600mm x 200mm above ground level duly plastered with 12mm thick 1:4 cement plaster, having a base of size 1800mm x 750mm x250mm below ground level.

Miscellaneous (HSR 31.35) (ix)Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of Engineer-in-charge of the work. (d) 16 sqmm

(e) 25 sqmm

(j) 120 sqmm

Supply, installation testing and commissioning of wall/free standing floor mounting dust & vermin proof compartmentalized cubical panel made out of 2mm thick CRCA sheet, required hardware 3mm thick Bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear. Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar Bakelite sheet 3mm thick for separately cable alley to BBC from switch chamber extended solid copper bars upto cable alleys shall provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring (copper) and fuse protection (Only outer area on all sides shall be measured) (HSR 31.63)

Supplying and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect.(HSR 31.64)

S/E of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement. Terminal plate consisting of 2 Nos. 100 A, 4 pole natural links including connection etc. with suitable connecting arrangement for 2 No. MCBs/kit kat including cost of R.C.C. 1:1.5:3 for foundation of size 0.7 M x 0.7 M x1.8 M with minimum 8 Nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200 mm C.C. for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work (HSR 31.68) (i) 7 Mtr. Long pole with top dia 70mm and bottom dia 130 mm with base plate of size 220x220x12mm

Supply and erection of module case circuit breaker single pole/4 pole on wall on existing prdestal including boundaing to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction oof the Engineer-in-charge of work (HSR 31.69) (iv) 4 pole MCCB 6amp. to 63 amp

SITC of 12.5 mtr long high mast manufactured from BSEN: 10025, or equivalent grade material, 2 (Two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS: 875 Pt III suitable for 6 Nos luminiare loading duly motorised (Power Tool) with starter and cable complete along with standard accessories supplied by the manufacturer with 3 Nos steel wire rope double drum system and twin dom aviation light with LED without foundation but including cost of set of foundation nuts and bolts, installation at site complete in all respect upto entire satisfaction of Engineer-in-charge. Thickness of Top Section = 3mm(Minimum), Bottom section = 3mm (Minimum) Top Dia = 150mm, Bottom Dia = 360mm Thickness of Galvanization Top = 65micron (min), Bottom = 85 micron (Min) (HSR 31.83)

S/E of LED street light of system voltage ≥70 W IP66 Multiple LED with lens optics and pressure die-cast aluminium housing for effective thermal management. Total system lumen of ≥70 watt LED should be 7800 or above in cool day light (5700K), Lumen efficacy > 115 lm/w, Power factor >0.95, CRI ≥70, Average life ≥50000 hours, complete with all accessories as required with connections and with 5 year warranty period.. Make: Philips, Havells, Wipro, Bajaj or HPL (NS)

S/E of LED flood light fitting 240 watt with IP 66 Multiple LED with lens optics, non-integral LED driver and pressure die-cast aluminium housing for effective thermal management. Total system lumen of ≥240 watt LED should be 25200 or above in cool day light (5700K), Lumen efficacy > 140 lm/w, Power factor ≥0.95, Average life ≥50000 hours, complete with all accessories as required with connections. Make Havells/HPL/Bajaj/Philips on existing pole (NS).

S/E of Single Arm Bracket 1.50 mtr. Long 40/50mm dia GI pipe (B Class) and 75 mm dia GI pipe (B Class) 30cm long top cover fixing on existing 7 mtr. high street light Octagonal pole with nuts and bolts making an angal of 10 to 15 degree with duly painted etc. complete in all respects upto the entire satisfaction of Engineer-in-charge of the work (NS)

SITC of astronomical time switch degree of protection IP 20 two module voltage 230 V AC, 50 Hz Astronomical programmable every one minute back up of 6 years 28 memory locations, current capacity 16A with 1 changeover (ICO) total 28 programmes. Ambient temperature -10 degree to +55 degree with 32 amp. contactor three phase with 32 amp. DP MCB and 25 amp. SP MCB. Make: Indo Asian, Philips, Havells, Wipro, Bajaj or HPL (NS)

S/E of double Arm Bracket 1.50 mtr. Long 40/50mm dia GI pipe (B Class) and 75 mm dia GI pipe (B Class) 30cm long top cover fixing on existing 7 mtr. high street light Octagonal pole with nuts and bolts making an angal of 10 to 15 degree with duly painted etc. complete in all respects upto the entire satisfaction of Engineer-in-charge of the work (NS)

M/s P.S. Electric

M/s Balaji Enterprises

M/s Bhagwati Technologies

Virender Singh prop. Balaji electric company