Pdg. CCTV cameras in old Judicial Court Complex and New Judicial Court complex Phase-II in Distt. Rohtak (Extra Cameras for Record Room and ADR Centre).

Amount

M.R. Items

N.S – 1 Supply, installation, Testing & Commissioning of Full HD 2 MP Outdoor PTZ IP Dome camera complete in all respect upto entire satisfaction Engineer in charge of works. Make:- Axis/Bosch/Pelco/Sony Specification:- 1.1 The 30x Full HD True Day/Night PTZ Dome Network Camera shall be ONVIF G/S compliant. Camera must have processor of OEM specific with minimum 512 MB Ram on possessor & 128 MB flash. 1.2 The 30x Full HD True Day/Night PTZ Dome Network Camera shall offer an advanced 1/3” or ¼” Progressive Scan Megapixel CCD/CMOS/MOS Sensor for superior picture detail and clarity. 1.3 The Full HD PTZ Camera shall be a self-contained unitized dome camera assembly that incorporates an integral day/night camera, pan-and-tilt motor, zoom lens and network interface. The Dome assembly shall come pre-wired from the factory. The units with external pan-and-tilt motor, encoder, lens etc. will not be accepted. 1.4 The PTZ Dome Camera shall feature a dome cover with Rain Wash Coating which shall soak rain drops into surface of camera dome maintaining better view during raining conditions. In addition, stain on camera dome surface can be relatively washed away by rain or by just spraying water without wiping. If the rain-wash coating is not available then bidder should quote integrated PTZ with wiper and washer units, maintaining clear pictures in bad/rainy weathers also. 1.5 The Network Camera shall be equipped with image stabilization feature capable of electronically stabilizing the image against mechanical vibration for better image quality in rough/windy weather conditions.

1.6 The Network Camera shall produce a high quality picture with a minimum illumination of 0.3 lux @30 IRE, in colour mode or 0.01 lux @30 IRE in B/W mode or better. It shall offer IR cut filter that switches automatically to on/off, to enhance low-light or IR light sensitivity during B/W mode. 1.7 The Network Camera shall offer wide dynamic range of 120dB or better and Digital Noise Reduction (DNR) features for real surveillance purposes under severe conditions. 1.8 The Network Camera shall offer on-device intelligence like special dynamic range/Face Detection feature to enhance details of human faces for better identification. 1.9 The Network Camera shall offer automatic gain control (AGC) function and an S/N ratio of 52dB or better. 1.10 The Network Camera shall use a minimum Quad Streaming Codec capable of simultaneously generating and transmitting independent H.264 video streams at 2 MP & 25 FPS. 1.11 The Network Camera shall be capable of generating and transmitting images at 1,920 x 1,080, 1,280 x 960, 1,280 x 720, 640 x 480, 640 x 360, 320 x 240 resolutions at 25 fps 1.12 The Camera shall support uni-cast and multi-cast transmissions. 1.13 The Network Camera shall offer feature to transform shadows and dark areas into natural and crisp images in real time and support intelligent features like Auto Backlight Compensation/ Adaptive Black Stretch (ABS), ATW, AWC, Gain Control and Digital Noise Reduction (DNR) etc. 1.14 The camera shall have the feature to capture video on variable image qualities/ resolutions i.e. higher resolution only on specified 2 areas of the image, to reduce the maximum network Bandwidth.

1.15 The Network Camera shall support 3D-DNR to ensure noise reduction in various conditions. 1.16 The Network Camera shall offer a built-in digital motion detection feature with minimum four configurable areas per scene and fifteen sensitivity levels adjustments. 1.17 The Network Camera shall be capable of Advanced Auto Tracking function which track and follow a single moving target. The Advanced Auto Tracking function shall not require an external video processor to control the Network Camera. 1.18 The Network Camera shall incorporate motorized zoom lens with a focal length of 3mm to 5mm ~ 100mm to 125mm or better with automatic iris and automatic focus features. 1.19 The Network camera shall provide 30x Optical zoom in Full HD mode with continuous 12x digital zoom 1.20 The Network Camera shall offer an automatic zoom-to-window feature allowing the user to draw a box area using his mouse and the camera will automatically zoom in on that area. 1.21 The Network Camera shall offer Automatic Tracing White Balance Adjustment feature for Sodium Vapour and other night time Street illumination. 1.22 The pan-and-tilt motor shall be a high-speed unit which allows 360° endless panning with a tilt range of -0 to +180°. 1.23 The pan-and-tilt motor shall allow for preset and sequence rotation speed of approximately 300° per second or better for Panning & Tilting. 1.24 The Network Camera shall use variable manual speed control to allow for super fine pan & tilt control of 0.065° to 120°/s.

1.35 The Network Camera shall have built-in Audio input and output jacks for transmitting and receiving full duplex audio stream through the same Ethernet connection as the video. The audio shall be encoded using the G.726 or equivalent ADPCM standard. 1.36 The Network Camera shall have 3 external I/O Terminals which can support alarm inputs/outputs or external Day/Night controls or exposure out for external flash synchronizing. 1.37 The Network Camera shall provide a Secure Digital High Capacity (SDHC) Memory Card slot which can support up to a maximum of 32GB SDHC memory card that can cache images in the event of a network failure, manual/alarm recording. The Network Camera shall also provide notification of the remaining capacity of the SDHC Memory Card. 1.38 The Network Camera shall provide bandwidth controls with various throughput levels or frame priority mode having Constant Bit Rate and Advanced VBR 1.39 The Network Camera shall be capable of being configured to automatically transmit alarm images transfer via FTP file transfer and/or e-mail. In addition, the Network Camera shall support the scheduled transfer of image data via FTP to an FTP server. 1.40 Terminal inputs, VMD alarms, and alarm commands shall be able to trigger actions such as SDHC memory recording, FTP file transfer, e-mail notification, alarm indications on web browser, alarm terminal output, and alarm command output. 1.41 Alarm log, Manual recording log, FTP error log saved in the SDHC memory card shall be able to display on the web browser GUI and can also be downloaded to the PC. Video playback or image download from the log shall also be made available. 1.42 The Network Camera shall support Ipv4 and Ipv6 network addressing and shall support TCP/IP, UDP/IP, HTTP, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, and SNMP protocols 1.43 The power source for the Network Camera shall be IEEE802.3at (Power over Ethernet Plus, PoE+) compliant or 240VAC.

1.44 The integrated housing shall have a polycarbonate dome cover, die cast aluminium body and use tamper resistant hardware. The housing shall have a built in sunshield. The housing shall be weatherproof to IP66 & NEMA4X and IK10 rating for physical shock. The Camera shall have inbuilt Heater, Blower or Dehumidification device for use in various weather conditions. 1.45 The Network Camera shall meet the following operating conditions: Temperature : -10 to +55oC or better Humidity : 90% or less (without condensation) 1.46 All units must be certified to CE, UL, FCC Safety & EMC standards. Certificates of offered model no of camera should be enclosed with technical bid and it should have complete model no of camera including alphabet & number. The Same UL certificate should be imprint/ emboss on camera itself. UL Certificates only for series cameras will not be considered. 1.47 The camera must be complying to UL/EN-61000-4-2, EN-61000-4-3 & EN-61000-4-4 guidelines/standards

N.S – 2 Supply Installation Testing & Commissioning of POE 24 Port 370W, 10/100/1000 Base-T, 2 x 10G SFP+ Ports,1 x 10/100Base-T out of band management port,1 x Serial Console Port RJ-45 , Switch should support stacking up to 4 switches,Switch should have switching fabric performance of minimum 88Gbps switch fabric.Switch should have forwarding rate of 65 Mpps .Switch should have 16K MAC entries, Should support internal / external redundant PSU, Switch should have Operating temperature: (0°Cto 50°C) inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make : Extreme / Cisco / Juniper

N.S – 3 Supply Installation Testing & Commissioning of 9U rack for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make: HCL/Comrack/Rackom.

N.S – 4 Supply Installation Testing & Commissioning of 3 Core Power Cable 1.5 sqmm. inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make: Finolex/Polycab/Havells

N.S – 5 Supply Installation Testing & Commissioning of 4-pair, Cat6 UTP Cable, roll of 305m inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make & Model: Dlink/AMP/Panduit

N.S. – 6 Supply and erection of PVC pipe 25mm dia ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. inlcuding cost of all material and labour required to complete the job in all respect upto the entire satisfaction of Engineer -in-charge of the work. Make: BEC, AKG, Ravindera, Diplast

N.S. – 7 Supplying, Installation, Testing & Commissioning of 24 port loded LIU Box with all the required pigtails complete in all respect upto entire satisfaction Engineer in charge of works. (Makes : Schinder/Dlink)

N.S. – 8 Supplying, Installation, Testing & Commissioning of SFP 10/100/1000 of SFP Module complete in all respect upto entire satisfaction Engineer in charge of works. (Makes : Cisco/Dlink)

N.S. – 9 Supply & Laying of 6 Core Single mode OFC cable etc complete in all respect. (Makes : Digisol/Dlink/Schinder)

N.S. – 10 Supplying, Installation, Testing & Commissioning of OFC Patch cord etc complete in all respect (Molex/schinder/D-link)