REPAIR MAINT OF TILING CEILING JOINERY AND ROOFING AT 178 MH AT NEW CANTT AND REPAIR MAINT OF LT EM INFRASTRUCTURE AT MP GOLAI BUTCHURY AND CMP AREA UNDER GE GANGTOK

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified and as directed.

All as item No 2 here-in before but n.exc 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down cement plaster/terrezzo cast in situ of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.

Demolition of concrete in ground floor and pavings n.exc 15cm thick (un reinforced) complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of precast concrete block/brick walling/stone boulders built in cement mortar etc complete all as specified and as directed.

Dismantling old PGI/CGI/AC sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and as directed.

Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins complete all as specified and as directed.

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified and as directed.

M&L for plain, framed, panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and as directed.

S&F second class hardwood, glazed and skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F factory made flush shutters 35 mm thick, solid core construction, with particle board core commercial type on one side and one face covered with decorative face veneer wtih lipping/frame to match complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification and drawing complete all as specified and as directed.

S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, Mild steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail on either side & as gap insert for toprail and bottom rail, panelling of both side prelam PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES Schedule Part-II (2020) complete all as pecified and as directed.

S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete all as specified and as directed.

M&L for 150 mm size aluminium anodised cast type handles complete all as specified and as directed.

M&L for 100 mm size aluminium anodised handle complete all as specified and as directed.

S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and as directed.

S&F of 100mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and as directed.

S&F of 100mm size mild steel butt hinges medium weight complete all as specified and as directed.

S&F of 75mm size mild steel butt hinges medium weight complete all as specified and as directed.

S&F continuous ( piano) hinges with 30 mm width of flaps ( when open), mild steel bright finish or electrogalvanised fixed with stainless steel screws complete all as specified and as directed.

S&F in repairs of 18 / 19mm thick particle board medium density flat pressed,single layer type with BWR type adhesive fixed with screws to timber frame work as in repair including teak wood lipping 6mm thick all round fixed with nails complete all as specified and as directed.

M&L for PCC (1:3:6), type C-1 (using 20mm graded stone aggregate) as in coping complete all as specified & as directed.

Taking up or down 20mm bore steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings or floor etc complete all as specified and as directed.

Taking up or down 25mm bore steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings or floor etc complete all as specified and as directed.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

M&L for 25mm steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete all as specified and as directed.

M&L for Cutting chases, pinning in, making good to facing where required and pointing in CM (1:3) for concealed water tubing conduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls complete all as specified and as directed.

M&L for glazed coloured ceramic tiles (350x250x7mm thick/450x300x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match the colour incl 10 mm thick screed bed/rendering of CM (1:4) as in wall complete all as specified and as directed.

M&L for Non - skid colured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for Non - skid colured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

All as per item No 36 here-in-above but in skirting with 10 mm thick backing coat in CM ( 1:4) complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection/path etc (75mm thick) finishing the surface even & smooth without using extra cement complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channels/drain including forming fair finished to drain channel complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4 ) with using WPC @ 100ml per bag of cement in finishing layer on brick or concrete surfaces finished even & smooth (WPC for finishing layer will be paid seperately as supply only) complete all as specified and as directed.

M&L for rendering 5mm thick in CM (1:3) in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for applying two coat of white wash including preparation of new or previously untreated surfaces of walls complete all as specified and as directed.

M&L for applying two coat of white washing including preparation of new or previously untreated surface of ceiling complete all as specified and as directed.

M&L for applying two coats of acrylic emulsion distemper of new or previously untreated surfaces of walls complete all as specified and as directed.

M&L for applying two coats of acrylic emulsion distemper including complete removal of existing treatment on wall complete all as specified and as directed.

M&L for applying wall care putty of 3 mm thick in two layers (1.5mm each layer) complete all as specified and as directed.

Material and labour for applying two coats of exterior acrylic emulsion painting including complete removal of existing surfaces including scafolding upto 15M ht and preperation of old/new surfaces all as specified and as directed.

S&F for PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints,fixed to wall/laid under trenches complete all as specified and as directed.

S&F for PVC (SWR) bends (Bore of pipe 110mm) any radius fixed to PVC Pipes/Steel Gutters etc complete all as specified and as directed.

S&F for PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 110 mm complete all as specified and as directed.

S & F for 75 mm bore PVC (SWR) pipe of pressure rating 4kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and as directed.

S&F for 75 mm bore PVC (SWR) bends in any radius complete all as specified and as directed.

S&F for PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 75 mm complete all as specified and as directed.

M&L in repairs for PVC floor/Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 100mm) as in repair complete all as specified and as directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum getting out and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified and as directed.

M&L PCC (1:4:8) type D-2 (using 40 mm graded stone aggregates) on in foundation, filling and mass concrete complete all as specified and as directed.

S&F for Rolled sections Fe 410-w (grade E-250) quality-A as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates complete all as specified and as directed.

S&F framed work such as grills, gratings etc, with ends of bars, shoulded and/or riveted or forged in spikes, framed guard bars, walk ways, railings, frame work of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated/Zigzag/Trapezoidal corrugation steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering fixed with self tapping screws/L type or J hooks complete all as specified and as directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws /L type or J hooks complete all as specified and as directed.

S&Fof 4mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified and as directed.

S&Fof 3mm thick sheet glass Figured glass, pin head type and glazing with n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified and as directed.

M&L for two coats of synthetic enamel painting (1st grade in quality) to new steel surface over a coat of red oxide primer including preparation of surfaces area exc 10cm width & girth complete all as specified and as directed.

M&L for prepartation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and apply one coat of synthetic enamel paint (1st grade in quality) complete all as specified and as directed.

M&L for two coats of synthetic enamel painting (1st grade in quality) to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified and as directed.

M& L for prepartation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described and apply one coat of synthetic enamel paint (1at grade in quality)complete all as specified and as directed.

S&F in repair Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete of complete all as specified and as directed.

S&F in repairs of vitreous china wash down water closet pedestal pattern white with all fittings fixed as in repairs (excluding flushing cistern and flush pipe) including plastic water closet seat,white closed pattern with flat bottom and cover and MS CP aluminium/ PVC hinging device complete all as specified and as directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts/brass nuts of length 600 mm complete all as specified and as directed.

S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, flush pipe etc complete & connecting to WC complete all as specified and as directed.

S&F of G I steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks to wooden/steel shutter,or galvanised wire staples complete all as specified and as directed..

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and as directed.

Dismantling timber scantling 40 sqcm and over in section and in any position in section complete all as specified and as directed.

S&F powder coated GI grid frame work for false ceiling comprising of the following sections for making partition of 600x600mm size fixed to walls with rawl plugs and screws and hanged to roof with and including 1.18 mm dia GI wire suspender of suitable length and buterfly clips, size of main tee shall be 23mmx 28mmx 0.30mm thick, cross tee shall be 24x 23x .30 mm thick and wall angle shall be 20mmx20mmx0.30mm thick complete all as specified and as directed.

S&F for 4mm thick Non asbestos fibre cement building board (E-board) of approved texture for insulation and acoustic purpose of size 595x595 mm size fixed with staples on snap grid as in ceiling complete all as specified and as directed.

M&L 2nd class hard wood as in timber scantling ,clean sawn, and fixed unframed work etc complete all as specified and as directed.

Applying two coats of DR Fixit Fast Flex 113 of DR Fixit for sunken portion treatment all as per manufacturer instruction and as directed.

PCC (1:7:12) type F2 (using 40mm graded aggregate) as in filling & mass concrete complete all as specified and as directed.

M&L for 15 mm thick rendering in cm (1:3) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

S&F steel water tubing 50 mm dia 'medium grade', galvanised, with all fitting and fixed complete to as in spout pipe in sunken portion,fixed in repairs complete all as specified and as directed.

M&L for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite granite stone including cutting and polishing etc including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for rounding to edges of granite slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and as directed.

M&L for machine cut prepolished kota stone flooring slab flooring 20-25mm thick over cement screed 15mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including dismantling old stone complete all as specified and as directed.

M&L for pre cast cement concrete block masonry PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and settting in cement mortar as per IS 383 complete all as specified and as directed.

S&F in repairs Harrison rail,mild steel,chromium plated , 25 mm dia with fixing brackets, stops, rollers, nob, holder etc in curtain rails complete all specified and as directed.

M&L for TMT bars , 10 mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

All as per item No 91.00 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M &L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in Slabs supported on walls including necessary form work complete all as specified & as directed. NOTE : Re-inforcement shall be measured and paid separately.

Taking down carefully old aluminium anodised door frame/door shutter fixed type window complete and refixing it after repairing of door frame/door shutter, pintal hinges including removing and refixing of door closer incl all hinges and all fittings, glass, ACP sheet, pre laminated particle board complete all as specified and as directed.

E/M Portion: Excavation in trenches not exceeding 1.5 M in wide and not exc. 1.5 M in depth for taking out or laying of under ground cable in soft / loose soil complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 M and deposited at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M&L for cutting the existing road / PCC / drain for taking out / laying of underground cable including necessary earthwork excavation and making good to match with the exisitng surface complete all as specified and with PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) 100mm thick complete all as specified and as directed. Note- (i)GI pipe shall be measured and paid separately. (ii) Any damages made/caused to the HT/LT cables,water supply pipelines,OFC cables etc during the excavation works shall be made good by the contr as per original and GE Cost of the same is deemed to be included to be included in the unit quoted rate.

M&L for 50mm dia bore galvanised iron light grade for cable protection and sealing both ends including taking out old pipe complete all as specified and as directed. Make:- Tata/ Jindal/ Prakash Surya.

M&L for 80mm dia bore galvanised iron light grade for cable protection and sealing both ends including taking out old pipe complete all as specified and as directed. Make:- Tata/ Jindal/ Prakash Surya.

Taking up/down existing defective cable of sizes 2/3/3.5/4 core 10 to 70 sqmm from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including relaying in same or different position/location complete all as specified and as directed.

All as per item No 101.00 but 95 to 300 qmm complete all as specified and as directed.

Laying,jointing, testing and commissioning of serviceable cable obtained from taking out in same or new location or position i.e. in trenches/on walls/floord/roof/ceiling etc of size 2/3/3.5/4 core 16 to 70 sqmm including necessary cable lugs, gland etc complete all as specified and as directed.

Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts XLPE insulated PVC sheathed IS-7098 (Part-I), screened , PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 4 core including cable lugs, glands, insulation tape etc complete all as specified and as directed.

All as per item No 104.00 here-in-above but size of 16 sqmm 4 core

All as per item No 104.00 here-in-above but size of 25 sqmm 4 core

All as per item No 104.00 here-in-above but size of 35 sqmm 4 core

All as per item No 104.00 here-in-above but size of 50 sqmm 3.5 core

All as per item No 104.00 here-in-above but size of 70 sqmm 3.5 core

All as per item No 104.00 here-in-above but size of 95 sqmm 3.5 core

All as per item No 104.00 here-in-above but size of 120 sqmm 3.5 core

All as per item No 104.00 here-in-above but size of 185 sqmm 3.5 core

All as per item No 104.00 here-in-above but size of 300 sqmm 3.5 core

M&L for straight through joint (Heat Shrinkable) for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 10 to16sqmm 3/3.5/4 core cables including testing complete all as specified and as directed.

All as per item No 114.00 here-in-above but size of 25 - 50 sqmm 3/3.5/4 core

All as per item No 114.00 here-in-above but size of 70 - 150 sqmm 3/3.5/4 core

All as per item No 114.00 here-in-above but size of 185 - 300 sqmm 3/3.5/4 core

S&F in repair MCCB 400 Amp,4 pole, 36 KA microprocessor based of 50Hz,415 V adjustable type including necessary cable lugs & wire etc complete all as specified and as directed.

All as per item No 118.00 here-in-above but 250 Amps,4 Pole, 36 KA microprocessor based

All as per item No 118.00 here-in-above but 250 Amps, 3 pole, 25 KA thermal magnetic based

All as per item No 118.00 here-in-above but 200 Amps, 4 pole, 25 KA thermal magnetic based

All as per item No 118.00 here-in-above but 100 Amps, 4 pole, 16 KA thermal magnetic based

All as per item No 118.00 here-in-above but 63 Amps, 4 pole, 16 KA thermal magnetic based

S&F in repair Onload Change over switch 160 Amps, 4 Pole, I-O-II Operation, manual type, with sheet steel enclosure or panel mounted as per site requirement including necessary cable lugs & Wire etc complete all as specified and as directed.

All as per item No 124.00 here-in-above but 100 Amps,4 Pole

All as per item No 124.00 here-in-above but 63 Amps,4 Pole

Supply and fix in repair for 300 Sqmm LT UG XLPE aluminium conductor cable wornout/heated/detoriated aluminium lugs including nuts,bolts,washers and PVC tape complete all as specified and as direcred.

All as per item No 127.00 here-in-above but 185 sqmm LT UG XLPE aluminium conductor cable lugs.

All as per item No 127.00 here-in-above but 120 sqmm LT UG XLPE aluminium conductor cable lugs.

All as per item No 127.00 here-in-above but 95 sqmm LT UG XLPE aluminium conductor cable lugs.

All as per item No 127.00 here-in-above but 70 sqmm LT UG XLPE aluminium conductor cable lugs.

All as per item No 127.00 here-in-above but 50 sqmm LT UG XLPE aluminium conductor cable lugs.

All as per item No127.00 here-in-above but 25 sqmm LT UG XLPE aluminium conductor cable lugs.

M & L for servicing of LT panels/Feeder piller box of any size by complete cleaning of panel and bus bar at chamber with CTC solution, and welding the door using arc welding and fixing of haevy duty hinges/Locking Handles/latches and necessary nut, bolts, washers/Leads/busbar and made it completely functional for open/close and incl checking of incoming and out going cable connections, Re-fixing of existing Cables, ACBs & MCCBs, and repair to connected PCC foundation and frame works, rewiring of control and power wiring of LT panel/Feeder with suitable size of FRLS cable but not less than 1.5 sqmm, replaceing of various unserviciable ON/OFF switches, lugs/Gland/Base plate/indicating Lamp/CT Coil etc making the panel fully functional including numbering the LT panel/feeder box and marking on panels (incoming and locations of outgoing MCCBs), to the satisfaction of Engr-in-Charge complete all as specified and as directed.

M&L for painting of LT panel board of sqmtr not less than 20 sqmtr by spraying two coats of epoxy based weather proof paint of ivory/Red colour over a coat of red oxide primer after cleaning of rusty panel surface of both inside/ outside by emery paper and necesary preparation of old steel surface complete all as specified and as directed.

M & L for Earthing complete with galvanized earth plate electrode 600 x 600 x 6 mm buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 25x4mm dia means of nut, bolts and washers made out of galvanized iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead/Strip and connected to control board or main switch or as directed by Engineer -in-Charge including earthing pit in PCC (1:3:6) type C1 for chamber & Pre-cast RCC cover of size 380 x 380 x 40 mm with one handle made out of 8 mm dia round bar, 20 mm dia GI pipe light grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete all as specified and as directed. Note- Rate quoted included the cost of earthwork , GI protection & GI strip from earthpit to LT panel upto 15 mtr.

S & F LED Multifunctional meter with CTs complete all as specified and as directed. Make:CAT No. WL411010OOOO of L&T or its equivalent in Legrand/ ABB/ Siemens/ GE/ C&S Electric Ltd/ Schneider as approved by GE.

S & F Indication Lamp (LED type) Set of 3 complete all as specified and as directed by Engr in-Charge. Make L&T or its equivalent in Legrand/ ABB/ Siemens/ GE/ C&S Electric Ltd/ Schneider as approved by GE.

Supply and fix in replacement of LT CTs copper wound capacity as per site requirement complete all as specified and as directed.

Supply and fixing 1100 volts ghrade heavy duty duty 16 sqmm stranded cable PVC insulated aluminium conductor,served with inner sheathing of PVC and overall PVC sheathed in service connections supended by insulating hangers not more than 01 meter apart including 4 mm suspnsion wire one twin core cable flat/circulaor

Supply , fixing and commissioning Design verified as per IS /IEC-61439-1&2 LT Panel outdoor/ LT Pillar Box by CPRI approved manufactures of comprising of the following all as directed by removing the old existing panel complete with out damaging the existing floor / cable ducts at secondary sub station complete all as specified and as directed. Note: The details of LT Panel board have been given against Particular Specification Clause No 60.9 to 60.9.7 of this tender.

Supply and laying of DWC pipe,ISI marked in trenches or in cable ducts or fixed on walls using clamps along with all accessories like socket,bend,couplers etc confirming to IS 14930,part-II complete with fitting cutting,jointing etc of size 50 mm outer dia complete all as specified and directed by Engr-in-Charge

Supply and laying of DWC pipe,ISI marked in trenches or in cable ducts or fixed on walls using clamps along with all accessories like socket,bend,couplers etc confirming to IS 14930,part-II complete with fitting cutting,jointing etc of size 75 mm outer dia complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs MCB of 4 pole of 63 Amps, 25 KA,415 volt , 10KA complete with connection ,testing and commissioning.

Supply and fix in repairs isolator of 3 pole of 63 Amps, 25KA 415 volt, 10KA complete with connection ,testing and commissioning.

Supply and fix in repairs isolator of 3 pole of 100 Amps, 25 KA 415 volt, 10KA complete with connection ,testing and commissioning.

Supply and fix in repairs MCB of 2 pole of 63 Amps,25 KA, 240 volt, 10KA complete with connection ,testing and commissioning.

Supply and fix in repairs MCB of 2 pole of 40 Amps,10 KA, 240 volt, 10KA complete with connection ,testing and commissioning.

S&F of street light terminal boxes made out with SMC material, shock & dust proof of inside size 300x200x105mm as per IS and including 20 Amp, TPN busbar fixed on insulators, 01 No 10Amp, SP MCB, earth termination with nuts & bolts and including 02 sets of flat iron 25x6mm clamps of suitable size with nuts, bolts and washers including two coats of aluminium paint over a coat of primer on exposed steel surfaces complete all as specified and as directed. Sintex cat Part No. GSJB-3020, or equivalent Hansel

M&L for providing plain cement concrete (1:4:8) mix type D2 (using 40 mm graded stone aggregate ) in foundations complete all as specified

M& L for preparation of old painted surfaaces of street light steel tubular poles above GL/Copping including cross section channels,flat iron clamps by srapping with wire brush applying one coats of aluminium paint including pole numbering using three layer of radium strip of min 4-5 inch wide(Yellow,Green,Blue) on each pole using printer letter all as specified and directed. Note-:(i) Ladders scaffolding,safety belts etc required for execation of works shall be arranged by contractor & cost of the same is deemed to be included in the unit rate quoted rates. (ii) Contractor shall be fully responsible for the safety aspects of the people enagaged by him & any issues(if any) arising during the work shall be dealt by the contractor& the Dept shall be no way responsibile whatever.

M/S S. S CHETTRI AND SONS

M/S ANIL KUMAR THAKUR

BIJAY MITTAL

NISHA CONSTRUCTIONS

KARMA TSETEN BHUTIA

MAHENDRA KHAWAS

M/S MANOJ VERMA