85907 E8 PROVN OF CONCERTINA COIL WITH Y SHAPE FENCE ON EXISTING PERIMETER WALL AT ADM AREA AT AF STN JAIPUR .

Amount

M&L Mild steel (MS Angle Iron) as in posts and struts in fencing including cutting tops shape as directed welding, drillied notching for wire etc including all necessary drilling etc. and similar work conforming to Fe-290 Gde E-165, Unit rate is also included for locking holes after fixing of barbed wire and welding to bent portion as directed by Engg-in-Charge.

M&L Two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces all as specified.

S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed wire 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of GI mild steel wire stapples or steel pins etc. all as specified. (Each line wire to be measured)

S&F punched tape concentrina coil of dia of coil 410mm (15 Nos rounds) each coil to be stretched to 6 mtr length secured and fixed in position having minimum tensile strength of 1620 N/sqmm of spacing steel core wire of size 2.60 mm make of concertina coil shall be as approved by GE/AGE(I) all as specified and directed by Engr-in-Charge.

PCC type B-1 (1:2:4),(Nominal mix ) using 20mm graded aggregates for hold fast, benching, coping, bed block etc. including necessary form work complete all as specified.

Demolition of stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

Demolition of cement concrete in any description and in any position not otherwise specifically provided for and removing of debris outside of MD Land as specified and directed.

M&L brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) all as specified by Engg -in- Charge.

Dismantling posts or struts (wood,steel or RCC) any section, including taking out embedded portion and making good disturbed ground, posts embedded in concrete as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for as specified and directed.

M&L for rendering 15 mm thick in CM (1:4 ), on stone masonry surfaces or other than fair faces of brick or concrete surface and finished even and smooth w/o using extra cement as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement based paint complete as specified and directed.

M&L Dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), about 40mm high 75mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 complete as specified and directed.

M&L for Cutting holes in exc. half brick n exc. One brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as require complete as specified and directed.

LAKSHMI ASSOCIATES