8880 REPAIRS TO COMPOUND WALL FENCING GATES AND DRAINS, HARDSTANDING FOOTPATH ETC IN VARIOUS MD/OTM ACCN UNDER AGE BR II SOUTH PUNE

Amount

Dismantling stone slab/tiles of any description or thickness, laid, bedded & pointed in cement mortor in floors, hard standing, Apron etc complete all as specified and as directed

M&L for Machine pressed precast concrete interlocking reflective type paver block any shape and size confirming to IS-15658-2006 of 60mm thick,M-35 Grade chemically coloured laid over 25mm thick stone dust/grit complete all as specified and directed

M&L for Coloured chequerred cement concrete glazed tiles of size 30cmx30cmx22mm thick in floor laid and jointed in cement slurry and pointed in grey cement and pigment over 20 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in precast kerb stone including chamfers weathering set in cement mortar 1:4 and joints to match with CM 1:3 complete all as specified and directed by Engineer in Charge

M&L for 75mm plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of tiles complete all as specified and directed

Dismantling Post or struts (wood, steel, RCC) embedded in natural ground any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantiling fencing wire mesh any type complete all as specified and as directed.

M&L for fixing broken glass coping on walls in CM 1:3 including taking and removing rubbish complete all as specified and directed.

M&L PCC in Type B0 1:2:4 (12.5mm graded aggregate) coping, lentel upto 1.5m clear span cills steps seismic and other similar bands plinth courses string courses lacing courses, parapets and railings upto 60cm in height coping, kneelers apex stones bed plates water troughs and the like including weathering slightly rounded or chamfeded angles and throating completing all as specified and as directed

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 (Brackets over 10 kg each to be measured under ‘Structural Steel') complete all as specified and directed by Engr-in-Charge.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab all as directed by Engineer-in-Charge.

M&L for Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc section of fillet exc 25 sq cm but n exc 50 sq cm complete all as specified and directed.

M&L for providing precast cement concrete Louvers and Jallies 25 mm thick including all Mouldings of type B0 1:2:4 Using 12.5 mm Graded Aggregates set in cement mortor 1:4 all as directed by Engineer in Charge

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in surface channel & drain, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed.

M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

M&L for concrete bed 1:4:8 type D-2 as in drain pipes including packing under, and haunching against the side of pipes after they are laid and tested in 150mm bore of pipe, complete all as specified and directed.

Dismantiling wrought iron or mild steel work of any description not otherwise provided for

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming Fe 410 -W (Gde- E- 250) quality- AFe

Excavation in trenches n.exc 1.5mtr wide and n.exc. 1.5m in depth for foundation etc. n.exc. 10 Sqm on plan and n.exc. 1.50 mtr in depth and getting out in hard/dense soil complete all as specified and as directed.

Removing excavated surplus soil of any type to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc any description complete all as specified and directed.

Rendering 15mm thick cement plaster in CM 1:4 on brick or concrete surface with thin layer of sponge finish using ready mix plaster complete all as specified and as directed. (Make : Godrej / Buildwell / Ascolite)

M&L for 20mm thick rough cast plaster complete all as specified and as directed.

Labour only for forming 'V' grooves in plaster not exc 10mm deep and n exc 10mm on faces complete all as specified & directed

Preparing newly plastered surfaces of walls and applying two coats of weather shield acrylic latex paint over a coat of alkali resistant primer complete all as specified and as directed.

S & F MS TMT bars 10mm dia and over, cut to length, bent to shape reqd, including cranking, bending spirally for hooping for columns and binding with mild steel annealed wire of dia not less than 0.9 mm or securing with clips complete all as specified and directed .

S&F TMT bars 8mm dia and over in stirrups, spacers, cut to length, bend to shape as required including cranking, bending for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Nominal mix RCC using 1 : 1½ : 3 type B-1 in foundation including rafts, footing, foundation beams, plinth beam bases for columns etc basements slabs under reamed piles and mass concrete complete all as specified and as directed.

M&L for Nominal mix RCC using 1 : 1½ : 3 type B-1 using 20mm graded stone aggregate, in Columns, Pillars, Piers, Posts and struts complete all as specified and as directed.

M&L for Nominal mix RCC using 1 : 1½ : 3 type B-1 using 20mm graded stone aggregate, in Beams, Cantilevers, Bressummers, Lintels over 1.5 m span complete all as specified and as directed.

M&L for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in drain cover with plain faces ,setting in cement mortar 1:4 complete all as specified and directed

Use and waste of formwork to sides of concrete foundation,footing,bases of columns ,rafts and raft beams ,sides and soffits (if any ) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed

Use and waste of form work to sides and soffits of floor or roof beams beam haunching, girders, bresummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified & directed

Use and waste of form work to sides of pillars, posts, struts, piers columns and stanchion rough finished surface of concrete flats complete all as specified & directed.

S&F joist channel ,angle or tee sections fixed independently without connecting plates etc cut to ordinary length i.e within 20mm of the length indicated of Fe -410-W (Gde E-250 Quality A) complete all as specified & directed

S&F in repairs Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with end provision of galvanised mild steel wire staple or steel pins, etc complete all as specified and as directed.

Preparing surfaces of steel and iron work new or old treating small articles such as stops covers gully grating holdfast and similar work are n exc 0.1 sqm each treating with tar or coal tar black paint complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm in width or girth not other wise described & applying two coat of synthetic enamel paint over one coat of red oxide priming coat complete all as specified & direcetd

Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 250 mm thick, complete all as specified and directed.

Supply only Chain Link Fencing 50X50mm Mesh or Cages with 3.15mm dia Mild Steel Galvanised Wire lapped, Straining and Binding with including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

Fixing only Chain Link Fencing 50X50mm Mesh or Cages with 3.15mm dia Mild Steel Galvanised Wire lapped, Straining and Binding including Mild Steel Wire straing bolts etc, complete all as specified and as directed.

M&L for Mild Steel Work such as Flat Iron Fillets for securing Wire Mesh, Straps, Ties, etc. and similar Work, fabrication from Steel Sections conforming to Fe-410-0 or Fe-310-0 including all necessary Welding, Bending Cold or Hot, Drilling Holes for Bolts, in any shape or size as indicated, complete all as specified and as directed.

M&L for Mild Steel Framed Work as Fencing Post, Gate, Grills, Grating, etc. with ends of Bar shouldered and/or riveted or forged into Spikes, Framed Guard Bars and Similar Work, etc. conforming to Fe-410-0 or Fe-310-0 including all necessary drilling, bolting or riveting, etc., complete all as specified and as directed.

M&L for mild steel round bars,10mm dia & over Fe -410-W (Gde E-250),as in stiffners for chain link fencing complete all as specified and directed.

M&L for Mild Steel Screw Bolts (Machine Made) with Hexagonal Head at one End and screwed the other Ends, each screwed end to be fitted with Washers and One Hexagonal Nut, diameter of Shank 5 to 10mm Length of Bolt exc. 100mm but not exc. 150mm, complete all as specified and as directed.

Demolition of cement concrete in ground floors paving not exc 15 cm thickness below or above Ground Level, complete all as specifieid and directed

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 40mm graded stone aggregate), 40mm thick, finished surface even and smooth using extra cement complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

S G Engineers

PRASHANT CONSTRUCTION

Vijay Construction and Company

M/S Abhishek Builders

Gauri Associates

VIRENDRA FABRICATORS