WBPWD/EE/PMED/NIQ-20/e-Q /2021-2022 (1st Re-Tender)

Amount

S & F of Glow Sign Board (23 ft x 4 ft x 6inch depth) made from 40x40x5mm MS angl, 40x5mm MS flat having the provision for opening from back by 25x25x5mm MS angle, 3 nos hinges duly welded. The board should be enclosed from out side by 20 SWG GI SHEET except the front. The entire board should be painted with one coat of synthetic enamel paint over one coat of RO primer. The front facia of the board is to be made with 2mm thk White PVC sheet of export quality having suitable size and to be fixed on the front structure by S & F suitable size aluminium angle, SS Screws. The matter is to be incripted on a whole best quality venyle sheet as per approved size, colour & matter which will be pasted properly over the PVC sheet. S & F of 15 (fifteen) nos 4ft 18w LED Tube light fittings (Philips/Bajaj/CG) including making entire connection with 3x1.5 sq. mm stranded copper wire through flexible PVC pipe for proper illumination of the GSB from inside as per direction of EIC. (Matter should be incripted in BENGALI or ENGLISH)

S & F of Glow Sign Board (21 ft x 4 ft x 6inch depth) made from 40x40x5mm MS angl, 40x5mm MS flat having the provision for opening from back by 25x25x5mm MS angle, 3 nos hinges duly welded. The board should be enclosed from out side by 20 SWG GI SHEET except the front. The entire board should be painted with one coat of synthetic enamel paint over one coat of RO primer. The front facia of the board is to be made with 2mm thk White PVC sheet of export quality having suitable size and to be fixed on the front structure by S & F suitable size aluminium angle, SS Screws. The matter is to be incripted on a whole best quality venyle sheet as per approved size, colour & matter which will be pasted properly over the PVC sheet. S & F of 15 (fifteen) nos 4ft 18w LED Tube light fittings (Philips/Bajaj/CG) including making entire connection with 3x1.5 sq. mm stranded copper wire through flexible PVC pipe for proper illumination of the GSB from inside as per direction of EIC. (Matter should be incripted in BENGALI or ENGLISH)

Steel Structure pillar: Steel Structure pillars for both sides are to be made in having final dimension L16inch x B12inch x H6ft (Rectangular cross section) whhich 1ft will be grouted on the Concreat piller welded to the piller reinforsed rod manding goods damages to meet up the net clearance of ft from GL to the bottom of the Sign Board. The same is to be fabricated from 50x50x6mm MS angle properly welded on all sides. 10mm Mild Steel Rod of length 20 inch are to be properly welded in Kachhi patern on four sides along the height to provide extra strength to the pillar. on all sides. 12mm MS plate with sufficient number of holes having requisite diameter is to be welded on top side of each part for resting & fixing the same on sign board. The structure is to be painted with two coats of enamel paint over one coat of RO primer.

Supply & Fixing of 250 v, 50 Watt LED gate light fittings with complete set with all accssories incl S& F of 50mm dia 2ft long fixed on top of the piller of the gate. (Make- havells, cat no.- RUBYMAXIPT50WLED830PSYMTOPC/ Phillip/Bajaj ) as per direction of EIC.

Supplying and fixing 19mm dia 3mm thick polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)

Supply & Laying following size cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. Make- Policab/ havells/ gloster/ KEI

a) 2 core 10 sqmm 1.1kv grade xlpe insulated Al/A cable.

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, fixing on wall with suitable arrangement. including painting with anticorrosive paint.

S & F compression type brass cable gland of the following sizes cables complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cables & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & joiting materials: .

a) 2 C 10 sqmm

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- Policab/ Havells/ RR kabel) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Make- Crabtree/ Schneider/ Anchor) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface] Average run 9 mtr.

Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. with S & F 6A 5pin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface.

a)On Board

Supply & Fixng of 9 Watt LED lamp for batten point with holder (Make- Havells/ Crompton/ Bajaj/ philips)

S & F 250 V 50 HZ 18" (450 mm) high flo oscillating type metal body Wall Bracket fan operated by pull cord switch with inbuilt regulator (Make -Orient, model- Tornado Wall-II/ Crompton)

Supplying & Fixing 10W, 240v LED type bulk head light fitting incl all accessirese on wall/ceiling Make - Havells, Cat no- HEXAFT10WLED857SSYMBOPC/ Phillips/ Crompton)

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- Policab/ Havells/ RR kabel) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.

a) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC For AC pt.

Supply and Fixing 240 V. 25 A Modular type Starter (Make- Crabtree/ Schneider/ Anchor),With 25A Modular swich type DP MCB (Ccurve) and 4 Module GI Modular type swich board with 4 module top cover plate flushed in wall incl.S and F swich board and cover plate and making necy.connections with PVC cu wire and earth continuity wire etc.

Supply and fixing 240 V. 25 A Modular type plug socket (Make- Crabtree/ Schneider/ Anchor),With plug Top and Switch With 2 module GI Modular type switch board with top cover plate flushed in wall and making necy connection with PVC Cu wire and earth continuity.Vide Page No:E-17/I-5(a)

Finishing of the xlpe/pvc insulated armoured cable ends by soldering with cable sockets & insulated tapes etc.including supply sockets,soldering materials,tapes etc & making connection.

a) 4 sqmm

b) 2.5 sqmm

Supply & Delivery of split type fixed speed, Non-Inverter Air conditioning machine having the following specification :Rated EER: 3.57,Compressor Type: Rotary, Min. Cooling Capacity (Watts): 6600, Max. Power Input (Watts) : 1850, Airflow rate for indoor unit(CFM.): 777, Nano Platium filter, powerful cool and wide & long airflow Air Sleep Cooling Technology, LCD remote control, Electronic metal housing box, 12 hour on and off timer, auto restart, auto swing, fan speed option (low/medium/high) etc. Refrigerant-R410A. Min. BEE Star rating : 3 star,Min.Tonnage 2 TON [Make- Mitshubishi Heavy Industris, model no- SRK25CSS-S6/A or eqv make of General/ Mitsubishi Electric-MS/MU-GK24VA. or eqv make of O-General)

Installation, testing, commissioning of Above Mentioned 2 TR A.C. Machines complete with iron angle/powder coated Bracket MS angle base frame as per choice of EIC. including cutting of wall, making holes and mending good the damages

Supply and fixing the followings :- i) 3-Core, 2.5 Sq.mm. PVC insulated copper power wire for inter - connecting indoor and outdoor unit. ii) copper refrigerant pipe line for inter connecting indoor & outdoor unit as following size a) 5/8" copper pipe including thermal insulation of suitable thickness as per direction of E.I.C. iii) copper refrigerant pipe line for inter connecting indoor & outdoor unit as following size : b) 1/4 " copper pipe including thermal insulation of suitable thickness as per direction of E.I.C.

MODERN ELECTRIC

AIR COOL ENTERPRISE

ROY CHOWDHURY AND CO