Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹31.2 L+₹2.7 L (9.41%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹31.5 L+₹3.0 L (10.4%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹37.8 L+₹9.2 L (32.4%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
15 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
SMART PERIODICAL SERVICES OF CERTAIN BLDGS AT BAIRAGARH UNDER GE BHOPAL
2023_MES_633484_1
8257/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹98,000
Yes
21 Feb 2024
19 Dec 2023
17 Jan 2024
19 Dec 2023
15 Jan 2024
3 Jan 2024
Amount
NOTE FOR ALL PAINTING AND WATERPROOFING ITEMS : The following precautionary measures shall be ensured by the contractor before and during execution of the work:- (i) All painting works and water proofing works shall be got executed through original materials manufacturing company or their authorised applicators as approved by GE and contractor should submitt MOU with the manufacturing company or their authorised applicators before execution of work and entire work shall be executed with the approved firm.OEM shall give guarentee of 05 years from the certified date of completion of work. 20 % payment of workdone will be released only after submission of OEM guarentee of 05 Years. (ii) Cotractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engr-in-Charge/ Office -in-charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engr-in-Charge on daily basis and the empty containers /bags shall be deposited in the store of Engr-in-Charge by the contrcator, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iv) After completion of painting work contractor shall remove and clean all the droplets /stain of paint left on the floor, glasses and joinery.
M&L for complete removal and preparation of old decorated treatment on wall / ceiling by scrapping with trucare wall sander L-01/ H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vacuum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and algae and fungus on the wall to be removed by using high pressure wash or coir brush and shall be treated with fungicidal solution, all surface cracks upto 5 mm width should be filled up with Dr Fixit Crack-X-paste. Cracks more than 5 mm and all separation gaps should be filled up with Dr Fixit Pidicrete URP modified mortar or as specified complete all as specified and directed.
M&L for waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 2 mm over the plastered /old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps :- Step 1: Mix the putty powder by adding water as per manufacturers instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2: Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI. Step 3: Allow 6-8 hours time to dry the putty surface.
M&L for one coat of acrylic water based interior/exterior grade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed.
M&L for preparation of old/ new decorated surface treatment on wall/ ceiling and applying two coats of oil bound emulsion distemper coverage 8-10 sqm /ltr of approved tint on prepared surface complete all as specified and directed.
M&L for applying two coats of anti fungal weather proof grade exterior acrylic emulsion paint of approved tint with crack filling upto 5 bars of positive hydrostatic pressure on verticle walls without any dilution with forced coverage not more than 3.5 sqm/ ltr as per manufacturer's instructions and all coats to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed. Make : Apex Ultima Protek Asian paints paints/ Nerolac excel top guards/ Berger weather coat long life 10
M&L for applying two coat of Dr Fixit Rain coat Neo (Primeless high build water based elastomeric exterior wall waterproof acrylic coating for exterior surfaces) designed with weather resistant acrylate polymers, UV resistant and good hiding and spreading, developing a strong inter coat adhesion with the substrate therefore no separate primer is required, features such as waterproofing, UV protection, anti algae resistance, crack bridging of elastic films covering hair line cracks, long term protection, colour variants, preparation of surfaces by cleaning the surfaces till it is free from dust, grease and flaking paint, any unstable paint to be removed, using high pressure wash or scraper, whichever is appropriate complete all as specified and directed. Note : 1. Application for verticle surface fresh plaster or repainting. 2. Use Dr Fixit Raincoat Neo directly from the container. Stir contents well before use. 3. Brush/ roller apply a self priming coat of Dr Fixit Raincoat Neo on the vertical wall surface in SSD condition, diluting 1 litre with 100 ml clean potable water. Allow it to dry for 4-6 hours. 4. Apply a coat of Dr Fixit Raincoat Neo without dilution as waterproof top coat, either by roller or brush with force coverage at the rate of 3.7- 4.1 Sqm / litre to achieve DFT of 100- 110 microns. Allow it to dry for 4- 6 hours. Lighter shades of white base on the top of dark colours need additional coat for finishing. 5. An additional coat should be applied in case of horizontal surfaces like the top of windows, ledges, parapet wall etc. Allow the coating to full air cure for 7 days.
M&L for preparation of old painted wooden surface of any description exceeding 10cm width or girth and applying one coat of synthectic enamel paint of approved tint complete all as specified and directed.
M&L for preparation of old painted steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces, including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for 15mm thick ready mix plaster CM (1:4) on brick/concrete/stone surfaces including finishing the surfaces fair and even (without using extra cement) and smooth as per manufacture direction complete all as specified and directed. Make- ultratech Readiplast, Jsw Enduroplast.
M&L for 10mm thick rendering in ready mix plaster (1:3) in ceiling including finishing the surfaces even and smooth without using extra cement applying two coats of oil bound distemper over a coat of putty where required, complete all as specified and directed.
M&L for 10mm thick rendering in ready mix plaster (1:4) in roof including finishing the surfaces even and smooth without using extra cement applying two coats of oil bound distemper over a coat of putty where required, complete all as specified and as directed.
Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.
S&F of rolled mild steel work non structural work as in rafter, purlins and like (beam, tee, angle, channel or flat sections ISI mark including 2 coat steel paint with primer complete all as specified and directed.
Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F of 20 mm uPVC pipes of pressure rating 10 kgf/cm2 laid in trench fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed in walls complete all as specified and directed.
S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed in walls complete all as specified and directed.
Removing loose concrete from chajjas, perapets, fascias, pillars, columns etc not exc 2 sqm on plane and repairing the same with cement mortar 1:3/ cement concrete type B-0 ,1:2:4 (12.5mm graded stone aggregate including white washing/ distempering/ weather proof paint / cement base paint as per existing surface complete all as specified and directed.
Labour only for clearing away roots and trees not exceeding 30 cm girth on buildings at any height including all grass, vegetation, saplings, shrubs, brushwood, undergrowth, and removing rubbish upto a distance of 50 mtr outside the periphery of the area under clearance except in yhe case of surface dressing which includes for all the foregoing except clearing away of trees complete all as specified and directed.
M/S VAIBHAV ENTERPRISES
M/S AJAY JAIN
PADAMSHRI CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .