REPAIR TO TILING, PLUMBING AND SANITARY FITTINGS AT HKC, FCTS AND HQ OFFRS MESS AND CTW UNDER GE(MCTE) MHOW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles.

Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description exc. 1 sqm but n. exc 2 Sqm each of any description complete all as specified and directed.

S & F 35 mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, moulded on solid (for each side): supplied and fitted to chowkat

S&F 35 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a)

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing with prelam sheet all as on drawing on Sl page No 178 of SSR Part-II

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS sqare tube, complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used instead of plain colour PVC sheet with solvent cement for stiles and top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour Prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F125mm size, butt hinges, medium weight, cold rolled mild steel.

S&F100mm size, butt hinges, medium weight, cold rolled mild steel.

S&F 150mm size extruded aluminium alloy handles, fabricated type.

S&F 100mm size extruded aluminium alloy handles, fabricated type.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.

Taking down old curtain rods 25mm dia, high Strength aluminium rod with powder coated paint of wood finish matching colour & installations brackets of galvanised steel, powder coated paint in matching colour with all accessories complete all as specified and directed.

S&F in repair curtain rod of stain less steel 25 mm dia all as specified and directed.

S&F in repair Stainless steel curtain rod brackets 25mm dia including necessary stainless steel clamp complete all as specified & directed.

Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Virified Ceramic tiles 10 mm thick Dark shade double charged (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm not tiles exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300x 450x 7 mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for 300 x 300 x 10mm thick heavy duty ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern) white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete. (Parryware, Hindware, Cera, Hindustan)

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed. (Parryware, Hindware, Cera, Hindustan)

S & F vitreous china squatting pan `Orissa` pattern, size 580 x 440 mm white in repairs with integral foot rests (Excluding flushing cistern and flush pipe)

S&F in repairs vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in including waste pipe complete all as specified and directed. (Parryware, Hindware, Cera, Hindustan)

S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.

S&F Grating 100 mm dia of CP with or without hole complete all as specified and directed.

S&F in repair 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed. Make : Jaquar, Marc, Plumber

S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed. Make : Jaquar, Marc, Plumber

S&F in repair 15 mm dia brass chromium plated swan neck pillar tap, fancy type with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed. Make : Jaquar, Marc, Plumber

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed. Plumber or Prayag

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S&F laying and testing for 15 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth all as specified and directed.

Dismantling PVC water tanks 1000 litres capacity.

Dismantling PVC water tanks 500 litres capacity.

S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. Make : Jaquar, Marc, Plumber

S & F in repairs two way Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. Make : Jaquar, Marc, Plumber

S & F in repairs Toielt Paper Holder Stainless Steel fixed to wall al as specifed and directed by Engr-in-Charge. Make : Jaquar, Marc, Plumber

S & F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall all as specified and directed by Engr-in-Charge. Make : Jaquar, Marc, Plumbe

S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook. Make : Jaquar, Marc, Plumber

S&F in repair chromium plated brass wall mixer 2-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed. Make : Jaquar, Marc, Plumber

S&F in repair chromium plated brass Central hole basinmixer without popup waste system complete screwd down for15 mm GI bore pipe complete all as specifed and directed. Make : Jaquar, Marc, Plumber

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type 60cm long between flanges, complete all as specified. Make : Jaquar, Marc, Plumber

S & F in repairs 32/40 mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc all as specifed and directed by Engr-in-Charge.

Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in CM 1:6

-ditto- but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S & F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge . plumber or Prayag

S&F in repairs Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to Vitreous china, wash down water closet pan (pedestal pattern) all as specfied and directed. Make : Jaquar, Marc, Plumber

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty all as directed by Engr-in-Charge .

M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling, chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and as directed.

M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick exterior surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing of newly plastered surface on exterior wall and applying two coats of cement paint over one coat of priming the surfaces all as specified and directed by Engr-in-Carge.

Taking down damaged any type of bathroom cabinet and S&F New PVC bathroom cabinet best quality. Make : plumber or Prayag

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/ spring clips and providing and fixing new ones.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane.

M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

M & L in fixed in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper including necessary putty (any tint) on walls complete all as specified and directed by Engr-in-Charge.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of oil bound distemper including necessary putty (any tint) on walls complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash all as directed by Engr-in-Charge.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.

M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.

M&L for preparation of new surfaces of plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl 1 mm thick wall putty all as directed by Engr-in-Charge.

M&L for Preparation of Old painted plastered surfaces and applying one Coats of cement base paint on Walls complete all as specified and as directed.

M&L for Preparation of Old painted plastered surfaces and applying Two Coats of cement base paint on Walls complete all as specified and as directed.

S&F Brass handles 100mm size, cast type, polished bright as approved by Engr in Charge complete all as specified and directed.

S&F 40 mm dia, brass, knobs for cupboard fixed with nut, screw and washer of mild steel, bright finised complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed.

S&F in repair Ball valves 15 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall l all as spcified.

S&F in repairs PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete Type B1 (1:2:4), in repairs and including waterleak proor treatment complete all as spcified

S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as spcified.

S&F in repairs PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as spcified.

S&F in repairs PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75 mm bore complete all as spcified.

S&F PVC in repairs (SWR) Branch pieces , double (double Y) equal or unequal of pipe 110mm bore complete all as spcified.

Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs

Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200 mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid (Frame work) etc all as specified as directed.

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed.

M&L for PCC 75 mm thick type B2 (1:2:4) using 40 mm graded stone aggregate in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and as directed.

M&L for PCC 75mm thick 1:4:8 type B2 using 40mm graded stone aggregate as insub base finishing the surface rough to receive tilies.

M&L for Cement concreat type B-0 (1:2:4) using 12.5mm graded stone aggregate 25 mm thickfinished surface rough to receive tiliing all as specified and directed.

Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m all as directed by the Engineer-in-charge.

M&L for plan, modular size kiln well burnt sub-class 'B' bricks, exc 6m in mean radius, built in CM (1:4), complete all as specified and directed.

M&L for brick work with modular size kiln well burnt sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4

M&L for pre polished coloured cement concrete chequred tile of approved quality size 250 x 250 x 25mm thick on floors over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-40 grade laid dry in floor/path with and including 50mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified.

S&F rolled sections as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (beam, tee, angle, channel pipes, tubes, plates and flat sections etc)including distances pieces ,cleats etc cutting half brick thick wall and fixing with cement mortar complete all as speified and directed of grade FE-410 (gde-E-250) quality all as specified and directed.

M&L for preparation of new steel surfaces of any description,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair double legged door stopper of aluminium alloy with rubber all as specified and directed.

S&F in repair aluminium anodized hasp & staple, safety type, with mild steel hinge pin including bolt to hinge plate, fixed with screws, of 100mm size all as specified and directed.

S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete all as specified and directed.

Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified and directed.

Disconnecting existing tanks, setting aside for carrying water proofing treatment, reconnecting & refixing in position capacity exc 500 ltrs but not exc 1000 litres as directed by Engineer-in-Charge.

M&L for 10 mm thick screed bed on concrete surfaces in CM(1:3) finished even and smooth without using extra cement complete.

M&L for PCC 25 mm thick (1:2:4) type Bo using 12 mm graded stone aggregates mixed with integral waterproofing chemical PIDI PROOF-LW mixed in proportion of 200ML/ 50Kg cemet of DR fixit of pidilite industries Ltd or STP No.1 (Liquid)of STP Ltd in proportion 200ML/50Kg cement as in padding on roof surfaces for correcting /making proper slope on roof/chhaja and roof kerbs/benching complete all as specified and directed.

M&L for water proofing treatment on non approachable/non accessible roof surfaces (Horizontal /vertical) in following sequences through manufacturer/ authorised applicator of the manufacturer complete all as specified and directed complete. (a) Properly cleaning and drying cemrnt surfaces. (b) Applying one coat of oxidized bitumen based solvent primer @ 0.3Kg/sqm. (c ) Laying 3mm thick APP modified water proofing membrane with 100mm over laps sealed & bonded to the surface by torchon method. (d) Applying two coats of bituminous aluminium paint @ 200 gram/ sqm (minimum). (Note:-Make/ brandk of APP membrane mmodified with all associated items shall be of any one of SUPER THERMOLAY OF STP LTD OR TORH SHIELD P-3160 OR PIDILITE INDUSTRIES LTD OR HYPER PLAS PLOLYSTER or equivalent approved Make

Dismantling Plain or Corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern Roof covering.

S&F for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5 mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15 mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5 mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings , accessories etc ll as specifed and directed by Engr-in-Charge. .

S & F of Powder coated aluminum three track sliding shutters two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces. (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5 mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter -01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall – 06 No per window.

Disconnecting existing tanks (exc 500 but n. exc 1000 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains. The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes, etc. and hoisting if required reconnecting and re-fixing in the same positiondate of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning. Note. (i) cleaning shall be the responsibility of the contractor for the inter period of contract. (ii) 50% of quoted amount shall be deducted form the executeed quantities if not cleaned to the tank.

Disconnecting existing tanks (exc 250 but n. exc 500 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains. The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes, etc. and hoisting if required reconnecting and re-fixing in the same position incl writing the date of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning. Note. (i) cleaning shall be the responsibility of the contractor for the inter period of contract. (ii) 50% of quoted amount shall be deducted form the executeed quantities if not cleaned to the tank.

M&L for powder coated anodised aluminium section of Jindal/ Hind/ Hindalco for frame and shutters for doors, including necessary joining cleats, glazing clips, rubber neoprene packing, handle, hinges, anodised aluminium snap beading, screws, etc complete all as specified and directed.

S&F standard aluminium anodised grill made of 5mm thick bar, size of mesh 100 x 100mm using U channel 25mm x 12mm complete all as specified and directed.

S&F double action floor spring hydrualically regulated made up of minimum 12.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and diredctd.

M&L for Heritagesurface texture in (HST)-Flakes Code No 21-2001,04,09 of M/S Heritage finish provided all as per manufactere's instructions minimum thickness shall not be1 mm to be carred out by trained applicatorof manufactures only.

S & F under counter ivory wash basin, vitreous china size 560x410x180 mm including cutting for and pinning in ends of brackets or erecting stand but incl waste coupling and brackets, fixing of supply and waste pipe, Rag Bolt Assy 3/8 " complete all as specified and directed.

S&F in repair pillar cock swan neck (T/M).

S & F in repair Vitreous china urinals, Half stall type, white complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2,securing urinal to plugs with and including 60mm long brass screws, with grating and union for discharge pipe incl 40mm waste coupling, 375mm long pvc connection and waste pipe complete.

S&F in repair Brass Urinal Spreader.

S&F in repair Brass Bottle Trap of size 300 mm (12").

M&L for water proofing treatment to sunken surfaces of the slab in following sequences :- (for 5 Years Guarantee)

(a) Slope correction by using M-20 (Nominal Mix) concrete minimum 25mm thickness at one end and a slope of 1:20 by using 12.5 mm graded stone aggregate with integral water proofing Chemical PIDI PROOF-LW mixed in proporation 200ml /50 Kg cement of DR Fixit of Pidilite Industries Ltd or STP No 1 (liquid) of STP Ltd in proporation 200ml / 50 Kg cement or equivalent as per manufacturer instructions complete.

(b) PCC padding with cement concrete 1:1.5: 3 type A 0 (using 12.5 mm graded stone aggregate 25mm thick with integral water proofing compound "Dr Fixit" manufactured by M/S Bouchemic or equivalent as per manufacturer instructions complete.

(c) Vertical sides plastered in CM 1:3, 15mm thick with WPC and 72 hours testing for water tightness by ponding of water complete.

(d) Supplying and applying Smart care tile Achesive or equivalent for tiling purpose and smartcare tile grouts of specified shades to seal the between the tiles etc complete all as manufacturer instruction.

KAILASH CHANDRA KHANDELWAL

Jamna Constructions