Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.0 LAccepted-AOC | L1 | Accepted-AOC FIRST LOWEST BIDDER | |
| 2 | L2₹28.8 L+₹2.8 L (10.7%)Rejected-AOC | L2 | Rejected-AOC SECOND LOWEST BIDDER | |
| 3 | L3₹28.8 L+₹2.8 L (10.7%)Rejected-AOC | L3 | Rejected-AOC THIRD LOWEST BIDDER | |
| 4 | L4₹29.2 L+₹3.2 L (12.4%)Rejected-AOC | L4 | Rejected-AOC FOURTH LOWEST BIDDER | |
| 5 | L5₹29.4 L+₹3.4 L (13.2%)Rejected-AOC | L5 | Rejected-AOC FIFTH LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
6 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Nagrota
Garrison Engineer Nagrota Pin 901208 c/o 56 APO
REPAIR TO WALL FENCING GATES DRAIN PATH AND MISC ITEMS UNDER AGE BR II AT GE NAGROTA
2023_MES_596370_1
GEN-8538/2023-24
Open Tender
Civil Works
Item Rate
270 days
Nagrota
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
₹90,000
Yes
3 Jul 2023
18 May 2023
13 Jun 2023
18 May 2023
6 Jun 2023
1 Jun 2023
Amount
SCHEDULE ‘A’ PART-I Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from cement concrete and making good disturbed ground complete all as specified and directed.
Excavation for post holes (or in similar hole ) each n.exc 0.50 Cum each including dismantling PCC including disposal of surplus n.exc 50m complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 (20mm graded aggregates) as in foundation filling and mass concrete complete all as specified and directed.
M&L for posts and struts in fencing of angle, tee including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed etc complete all as specifed
Fixing only of chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
Supply only Chain link fencing with or without line wires,any type and mesh size and any type of standards and dia of wire ( as directed by Engineer-in-charge) fixed with rails, staining bolts etc including provision of binding wire including dismantling existing unserviceable fencing all as specifed and directed.( rails, staining bolts will be measured in seperate Item) complete all as specified and directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and 5 to 10mm dia of shank complete all as specified and directed
S&F, TMT steel bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
S&F mild steel conforming to Fe-290 Gde E-165 in Hand rails,haif round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars,for doors,balusters,nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, Angle iron post and struts in fencing including cutting tops to shape as directed, drilling hole, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work complete all as specified and directed.
M&L for preparation of new steel surface exc 10 cm width or girth and applying two coat of synthetic enamel paint on steel surfaces over a coat of red oxide complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc .including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.
M & L brick work with subclass ‘B’ bricks using old size well burnt bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
All as per item 13 above but except bricks
M&L for PCC (1:3:6) Type C1 using 20mm graded stone agg as in surface channel & drain incl form work complete all as specified and directed.
Extra for forming fair finished drain or channel 25cm inner girth in cement concrete using extra cement including forms ,moulds,mitred/stopped ends etc complete all as specified and directed.
Add or deduct for each 25mm girth over under 30 cm girth complete all as specified and directed.
M & L for 15mm thick rendering on brick work or concrete surface in CM 1:4 surface finished even & fair without using extra cement complete all as specified and directed.
M & L for preparation of new decorated surfaces of external walls and applying two coat of cement base paint over a coat of primer complete as specified and directed
M & L for Preparing old plastered surfaces of wall and applying one coat of cement based paint complete all as specified and directed.
M&L PCC 1:2:4 Type B1 (using 20mm graded) as in copping, bed plates etc complete all as specified and directed.
M&L for providing precast cement concrete (type B0 1:2:4 12.5mm graded aggregate) louvres and jallies, 25mm thick (measured solid), including all mouldings and form work including demlation of old louvres and jallies complete all as specified and directed.
S & F M.S. Flat iron as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc. conforming to Fe 410-0 or F 310-0 complete all as specified and directed.
M & L for Ornamental and intricated design frame work in steel gate complete drilled welding for fixing of steel sheeting or other covering, hooks hinges or steel hanging doors fittings also fastening and fixing complete all as specified and directed.
Dismantling of Barbed wire in fencing of any description complete all as specified and directed.
S & F Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc.,(each line wire to be measured separatley) complete all as specified. as directed.
Restraining & resecuring existing barbed wire of any type incl making good staples etc any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured separatley) complete all as specified.
M & L for Preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed.
Supply and Fix concertina coil (reinforced punched barbed tape single layer) fixed on 'Y' shaped angle over security fencing complete all as specified and directed:- 1. Diameter of concertina coil: 600 mm. 2. Numbers of turns in concertina: 50 to 53 turns. 3. Weight of each coil- 9.5 to 10 kg. 4. Coverage per coil- 6 Rm. 5. Central core Wire - Made of high tensile spring steel core wire conforming to IS -4454 duly hot dipped galvanized (conforming to IS 2629) with diameter 2.59mm_+0.05mm ,UTS 145-160 kg/sqmm, zinc coating 250-300gms/sqm. 6. Strip :-Electro galvanised steel strip 0.5 mm_+ 0.02mm thick , width 19mm (before wrapping on central core wire) conforming to IS-1573, zinc coating -120gms/sqm and bituminized dipped, width of barbes 11.5mm ,pitch of barbes 25.4mm_+0.20mm. 7. Clips :-AISI 304-1.5 mm thick C and U clips.'C' special type for fixing coil and RBT wire joining. 8. No of clips 125 for each coil. 9. Handle and spikes to be provided as required. Note :- Running length of the fencing shall be measured for payment purpose.
Taking down and refixing of angle iron gate ( 3mtr to 5 mtr wide and 2 mtr to 2.5 mtr high) including embedding of pintel hinges in concrete blocks and fixing locking arrangement, complete all as specified and as directed
Demolition of Concrete (Unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M & L Cement concrete type C-2, 1:3:6 40mm graded aggregate 100mm thick complete all as specified and directed.
M & L Dry Fine Sand cushioning 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified and directed.
M&L machine pressed pre cast concrete interlocking paver ( with grey cement and pigment) any shape and size confirming to IS -15658-2006 of 60 mm thickness ,M-40 grade complete all as specified and directed.
M & L for Chequered cement interlocking concrete tiles glossy finish coloured 202 to 25 mm thick of any size and pattern as approved by GE as in patches in floor with set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including cement screed 15mm thick in cement mortar 1:6 complete all as specified and directed.
Material and labour for 25mm thick PCC type BO 1:2:4 (12.5mm graded aggregate in flooring finishing rough to recieveing Top layer for flooring complete all as specified and directed.
M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.
Chequered cement concrete coloured tiles 30 cm x 30 cm x 25 mm thick set , jointed and pointed in neat cement slurry with grey cement and pigment in floors complete all as specified and directed.
BHARTI CONSTRUCTIONS
Nitika electricals and engineers works
M/S Shankardass Devidass
M/S MANISHA BUILDERS
RAJINDRA ENGINEERS & CONTRACTORS
Karmnaya Construction
M/s Mohd Ibrahim Khan
bamral builder
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .