PROVN OF COVERED SHED WITH FLOORING FOR REPAIRING OF B VEHS NEAR BLDG NO E 42 AT 805 FWC EME AND OTHER SANCTIONED WORKS OF GE WEST FEROZEPUR CANTT

Amount

M&L for Excavation in post holes (or similar holes) each n.exc. 0.5 cum, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc. 50m and making good surfaces, complete all as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in soft/loose soil , watering, and removing surplus soil to a distance n exc 50 mtr and making good surface complete all as specified & directed.

M&L for Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth; for foundation etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth in loose/soft soil and getting out for laying of cable and reection pole.

M&L for Cement concrete (1:2:4), type B-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed

M&L for cement concrete Type C2 1:3:6 (40 mm graded aggregate) in foundations, fillings and mass concerte complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete complete all as specified.

M&L for 40mm thick Damp proof course with cement concrete 1:2:4 type-B0 to horizontal or vertical surfaces including water proofing compound and necessary formwork complete all as specified & directed by Engr-in-Charge. (Note: Water proofing compound to be measured and paid for separately).

Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil, complete all as directed by Engr-in-Charge.

Removing excavated material as soil exc. 50 m and n.exc 250 m, depositing where directed at a level n.exc. 1.5m above the starting point, complete all as directed.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

M&L for form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. complete all as directed by Engr-in-Charge.

Formwork to soffit of suspended slabs such as roof slabs floor slabs, landings and similar works not exc 200 mm thick (Horizontal or sloping).complete all as directed by Engg-in charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide. complete all as directed by Engg-in charge.

M&L for RCC type B1, 1: 1.5 :3 (20 mm graded aggregate) as in lintel beams, roof beams, cantilevers etc. complete all as directed by Engr-in-Charge.

M&L for RCC type B1,1: 1.5 :3 (20 mm graded aggregate) as in slab supported on walls, beams and columns in roofs etc. complete all as directed by Engr-in-Charge.

M&L for 10 mm thick (average) screeding on concrete surfaces in cement mortar 1:4, in order to maintain proper slope, add WPC @3% of cement weight(WPC paid separately), finished even and smooth without using extra cement complete all as specified and as directed.

Mild steel 10mm dia and over TMT bars as in reinforcement cut to length bent to shape required including cranking, hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified.

S&F Mild steel TMT bars 5 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.

S&F Mild steel TMT bars 8mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.

M&L for Moorum/red bajri filling in floors or pavings, laid in layeres n.exc. 15 cm thick, spread, levelled and reammed including watering, complete all as directed by Engr-in- Charge.

M&L for Hard core 75 mm thick, using broken bricks of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, plinth protection and ramp, complete all as directed by Engr-in- Charge.

M&L for 100mm thick Plain cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in floor finishing even and smooth using extra cement, Complete all as directed by Engr-in-Charge and as specified. (Note : Expansion joint will be measured and paid seperately).

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50mm thick, surfaces finished even and fair without using extra cement as in plinth protection, complete all as directed by Engr-in-Charge and as specified.

M&L for PCC 75 mm thick, type D-2, 1:4:8 (40mm graded aggregate) as in sub-base, complete all as directed.

M&L for 20mm thick cement concrete (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in floor finished without using extra cement complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.

M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L for glazed ceramic tiles, coloured (light colour as approved), of size 300x200/ 300x450 of 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry including 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for 100mm thick Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

M&L for Brushing neat cement slurry with 3.0kg of cement per sqm, Complete all as specified and directed.

M&L for fine sand bed under paver block, complete all as directed by Engr-in-charge.

M&L 60mm thick Coloured interlocking (M-35) cement concrete tiles with grey cement and pigment of approved design & pattern as approved by GE. Complete all as speciifed and directed.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L for rendering 15mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, using WPC, surfaces finished even and fair complete all as specified (Note : Water proofing compound measured and paid separately).

M&L for 10mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

Supply only integral water proofing compound complete all as specified.

S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle with and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

Demolition of boarding of any description and in any position complete all as specified.

S & F 18 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shelves with rebates fixed on PVC solid pattern of size 40mmx18mmx500mm on tree sides n complete including taking down as fixed in repairs all as specified and directed.all as spd and directed by Engineer in charge Make : Rajshree, Echon or equallent as approved by GE

S & F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

S&F 3mm thick, Figured glass pin head type, with oil putty, in squares n.exc 0.50 Sqm complete all as specified.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size PVC waste pipe, angle iron/cast iron brackets of required size complete all as specified and directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete bedding and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified.

S&F Vitreous China bowl urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe ) including waste pipe 32mm dia bore complete all as specified and directed.

S&F 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall , overall size of sink 495mmx420mm, bowl size 410mmx330mmx160mm as in repair complete all as specified.

S&F stainless steel plate rack of standard pattern & of size 750x600x250mm thickness of stainless steel sheet including fixing to wall with 4 nos 50 mm screws & pvc rawl plugs complete all as specifed and directed.

S&F Soap dish of PTMT fixed to wall with steel screws anf PVC rawl plug complete all as specified.

S&F chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe complete all as specified.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

S&F Bib tap of cast copper alloy brass 15mm bore, with crutch or butter fly handle, screwed down, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F PVC connection pipe heavy duty 45cm long with brass nuts, rubber washers for 15mm dia iron pipe,unions stop cocks etc complete all as specified and directed.

S&F 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup.

S&F 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) complete all as specified.

S & F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe complete all as specified and directed.

S&F tubular towel rail of PTMT, 60cm long between flanges fixed with wdn/plastic cleats.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed.

All as per item No : 66 herein before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.

Taking down shutters of any description and refixing in the same opening exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item above item NO: 69 here-in-before but size 125x60mm with double rebate.

S&F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per specification & drawing complete all as specified.

S&F factory made 35mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats.

S&F factory made 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat.

Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 150 mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified.

Taking up or down 15 mm existing steel tubing and connections and re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.

All as per item No. 81 here in before but 20mm dia.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roof including fittings, complete all as specified.

S&F 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified.

Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall (Make : Prince, Kissan, Finolex or equivalent) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors (Make : Prince, Kissan, Finolex or equivalent) complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.

S&F PVC (SWR) vent cowl, for 110mm bore pipe complete all as specified.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radius complete all as specified.

M&L Reinforced Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6. Note: Reinforcement will be measured and paid seperately.

M&L for Mild steel TMT bars 10mm dia and over,cut to length,bent to shape required,including cranking,bending,hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified & directed.

M&L for cutting into existing manhole for connecting new drains of internal dia 150mm , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete M-15 grade, smooth finished and reforming benching as required.

M&L for Preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified.

M&L for Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified.

M&L for White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified.

M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices.

M & L for preparing of new decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling.

M&L washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper all as specified.

M & L preparing old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

M & L for Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar

M & L Granite 20mm thick machine cut, bedded andjointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar (1:4) complete all as specified.

S&F Mild steel curtain rod PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

S&F Rolled sections as in post/pillars where connected with angle cleats or other connecting plates etc, of Fe 410-W (Gde E-250) Quality 'B' including fabrication, erraction and fixing complete all as specified and directed by Engr-in-Charge.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) Quality 'B' including fabrication, erraction and fixing complete all as specified and directed by Engr-in-Charge.

S&F Mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment and fixing complete all as specified and directed by Engr-in-Charge.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long and n.exc 10cm long and dia of shank 11 to 15mm etc complete all as specified and directed by Engineer-in-charge.

S&F Pre painted galvalume aluminium Zinc coating GI based corrugated/crimped steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed.

All as per item no. 118, but 0.80mm thick plain sheet in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of Zinc coating 275 all as specified and directed.

M&L for cement concrete 1:2:4 type B-1, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound complete all as directed and specified by Engr-in-Charge.

M&L for Forming 12mm thick Expansion joints in cement concrete floor 100mm thick, joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

Supply and fixing rolled mild steel structural work as in post and struts in fencing including cutting tops to shape as directed,drilling holes, notching for wires etc, flat iron fillets (for securing chain link, square /round bars for chain link fencing etc including all necessary drilling,bolting, welding or riveting etc and all other similar works conforming Fe-290 Gde E-165 complete all as speciied and directed.

Supply only mild steel galvanised chain link fencing made of 3.15 mm dia wire and 50mm x 50mm mesh.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. as directed (each line wire to be measured)

M&L point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor multi stranded of size 1.5 Sqmm, single core, in and including rigid non metallic PVC conealed/surface conduit, medium grade of suitable size (not less than 200 mm dia) duly ISI marked with all accessories such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards/round blocks (for housing lamp holders and sketch fittings etc) and MS pressed steel/cast iron sunken boxes of suitable size for mounting switches/bell pushes/sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continous earth wire of size 1.5 Sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the following:- One light point controlled by one single pole one way switch

One 5 Amps socket outlet independent controlled by one single pole 5 Amps switch

All as per Item No 128 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

S&F switch paino flush type 5 Amps, one way complete all as specified.

Supply & Fixing Switch piano flush type 15 amps, single pole one way complete all as specified.

S & F Socket outlet 5 pin, 5 Amps, piano flush type complete all as specified.

Supply & Fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type complete all as specified.

S & F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminalscomplete all as specified.

S & F MCB single pole neutral (SPN) 240 volts, 20 to 60 Amps, 10 KA complete all as specified.

S & F MCB single pole(SP) 240 volts, 05 to 30 Amps, 10 KA complete all as specified.

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

S & F Lamp holder insulated body threaded dome pattern,suitable for bracket / batten fitting complete all as specified including 10W LED lamp.

Supply & Fix LED tube light fitting 18 watts batten type fixed on wall/ ceiling etc. including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Cat Part no. LCTL-18-CDL of Crompton or LHEXBXPNIW020 of Havells or equivalent Bajaj/Phillips

Supply & Fixing LED Bldg security light 30 watts with bracket (for housing street light fittings) made of pipe 25 mm dia light grade suitable size duly cutted and welded at an angle of 120 degree and fixed to wall with 50 mm X 6 mm MS clamps - 02 Nos with 16 mm dia bolts,nuts,and washers complete all as specified and directed. LSTS-30-CDL of Crompton or ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC of Havells or equivalent Bajaj/Phillips

Supply and fix exhaust fans AC single phase 230 V, of size 300 mm sweep (12") with louver Iron body complete all as specified and directed. Make : Crompton/Bajaj/Havells

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core.

Removal of excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as per directed

Suplying and fixing 1100 volts grade heavy duty10 Sq mm two core cable PVC insulated aluminium conductor, served with inner shething of PVC sheeathed in service conections suspended by insulating hangers not more than I metre apart including 4Sq mm suspension wire, one twin core cable flat or circular

M & L sub class B bricks locally available of size 22x11x7.5 cm laid dry width wise acrose the line of cable in trenches for protection of UG cable

Mild steel galvanised iron pipe light grade 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required all as specified.

M&L Precast Reinforcement cement concrete in 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs (perforated holes& lifing provision with flexible handle made with no tless than plain Ms steel 12mm bar)) etc., incl all necessery form work finished even and smooth complete all as specified and as directed. Note;-Reinforcement shall be measured paid seperately

M&L PCC(1:3:6) using 20mm graded aggregate as in Coping concrete including all necessary form work and finished the xposed concrete surfaces

M & L for Surface dressing n exc 15 cm deep in soft /loose soil complete all as specified .

M&L for rendering 15 mm thick in cement mortar 1:4 on concrete surface ,surface finished fair and even complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as direced by Engr-in-Charge.

M&L for form work to sides of concrete foundations, footings, bases of columns and plinth beams and similar work, complete all as directed by Engr-in-Charge.

M&L for Polymer modified bituminous membrane with sand witched polythene film/non woven polyster reinforcement /polymeric water proofing membrane weighing minimum 3Kg/sqm ( make : IWL/STP/ HYPERPLAST or equivalent ) laid after Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (i.e roof slab cleaned throughly to remove all loose particle dust/dirt particle ) membrane shall be laid over entire roof surface and on verticle surface up to grooves ( or as per manufacturers recommendation) with over laps of 100mm The over lap shall be sealed by flames or as per manufacturer instruction.Hot blown bitumen grade 85/25 @1.2kg/Sqm applied over the membrane should be compatible with membrane all as recommendation manufacturers and all as specified and directed.

M&L for prepration of roof surface and applying two coat of solar reflective bituminous aluminium paint @0.10 Kg/Sqm over bituminious membrane complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified.

M&L for Moorum/red bajri filling in floors or pavings, laid in layeres n.exc. 15 cm thick, spread, levelled and reammed including watering, complete all as directed by Engr-in- Charge.

M&L 50 mm thick PCC, type B-1, 1:2:4 (20mm graded aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as directed.

M&L PCC (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats complete all as specified.

S&F 150mm size, extruded aluminium alloy handles, fabricated type, anodized and fixed with screws complete all as specified.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S&F Extruded Aluminium alloy tower bolt of 200mm length of bolt and fixed with screws, complete all as specified.

S&F Wash hand basin fancy couter type Ceramic dimensions (lxb) in cms: 54x42 vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe PVC 32mm bore, complete all as specified. (Make : Hindware Model No: 91046 or Equivalent as approved).

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, complete all as specified.

S&F Vitreous China Urinal, Half stall type, whiteUrinal, bowl type or half stall pattern, basin with pvc coupling including connections to flushing pipe and outgoing pipes complete all as specified and directed.

S&F Self-closing tap for urinal, cast copper alloy 15mm bore, chromium plated, screwed for iron pipe and fixed complete all as specified

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) Complete all as specified and directed.

S&F CP Health Faucet with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer), complete all as specified.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wdn/plastic cleats.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.

S&F 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement including jointing to waste pipe complete all as specified and directed.

M&L for Writing letters or figures (Block, Roman, Italic or Indian) n. exc 30cm high with synthetic enamel paint including cleaning and preparation of surfaces complete all as specfied and directed.

M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed as specified.

M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore.

M&L providing for cement concrete M-15, using 20mm graded aggregate in benching in MH rounded or chamfered on edges.

M/S N Maini Constrution

KAMALJIT SINGH CONTRACTOR

manoj and company

RAKESH KUMAR SATISH KUMAR

M/S Yashpaul Gulati

Guru Kirpa Trading Company

M/s Bansi Lal