AGE I CGN 09 25 26 REPAIR/MAINT TO CSSB, DSC LIVING AND ALLIED BLDGS AT SEC 62 UNDER AGE (I) CG NOIDA

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) and removing the demolished material out of MOD land complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing the rubbish off the premises of MOD land complete all as specified and directed .

Dismantling stone slabs and tiles of any thickness laid bedded and pointed in any mortar, removing the rubbish off the premises of MOD land complete all as specified.

M&L for 25mm thick plain cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in floors complete.

M&L for non skid joint free coloured ceramic tiles 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and joint in neat cement slurry and point in coloured cement to match the shade of tile including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for double charged/ultra charged vitrified ceramic tiles (Acid & Alkali Resistant) 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Granite /Marble /wood texture vitrified ceramic 10 mm thick in vertical surfaces. area of each tile n exc 0.36 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, including 10mm thick backing coat of CM 1:4 complete all as specified and directed .

M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, including 10 mm thick backing coat in CM 1:4 all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust and jointed with Granite epoxy/silicone glue to match with shade of granite including 15mm thick screed bed in CM 1:4 complete.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations and rubbing and polishing complete

Taking down shutters of any description area exceeding 1 sqm but not exceeding 2 sqm each.

S&F 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneers on both sides incl approved II class Hardwood lipping all-round complete all as specified and directed.

S&F 30mm thick 2nd class Hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc(without sash bars), edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing glass, gauze,etc complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Taking down Chowkhats or frames exc 1.5 sqm but n.exc 4 sqm with shutters (Without taking off shutters from the frame)

S&F Solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, and S&F in the frame at site as per specification and drawing.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per directions of Engineer-in-Charge.

S&F 12mm thick interior grade, one side laminated, prelaminated board complete all as specified and directed

M&L 3mm thick sheet glass, ordinary quality and glazing with oil putty or fixed with bead/glazing pins in square n exc 0.5 Sqm in each pane all as spd

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed to PVC door complete.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 150mm long aluminium anodised handles, extruded aluminium alloy fabricated type and fixed to PVC door complete

S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type 100mm size C21

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete

Taking down cement plastering on brick or concrete wall surfaces including out joints, hacking for key, scrubbing down with water all as directed.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete.

M&L for rendering 5 mm thick cement plaster in CM 1:3 on ceiling surfaces including finished even and smooth without using extra cement.

M&L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including one coat of 3mm thick Birla Putty and primer complete all as specified and directed.

M&L for Preparing new plastered or unplastered ceiling surfaces and applying two coats of distemper oil emulsion, white or tinted over & including one coat of 3mm thick Birla Putty and primer complete all as specified and directed.

M&L for complete removal of existing treatment on wall surfaces using electrical operated grinder and applying one coats of distemper oil emulsion, white or tinted over & including one coat of 3mm thick Birla Putty complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling surfaces using electrical operated grinder and applying one coats of distemper oil emulsion, including one coat of 3mm th Birla Putty and primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete

M&L for preparation of old decorated plastered or unplastered surfaces incl brooming down or steel wire brushing,scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on wall.

Taking up or down steel tubing and connections 20 mm bore of pipe complete all as specified and directed.

Cutting chases, pinning in, making good to facings in brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves. lintels etc and cutting chases for concealed waer tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete

S&F for CPVC pipe SDR-11, 20mm OD with plain SDR-11 fittings on walls/ celing or laying in floors or concealed, jointed with CPVC solvent cement, complete all as specified and directed.

S&F in repairs central hole basin mixer cast copper alloy, chromium plated complete all as directed by Engr-in-charge.

S&F in repairs CP Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges complete all as directed by Engr-in-charge.

S&F in repairs fancy type two way Bib tap standard Foam flow with flange of PTMT any colour high pressure screwed for iron pipe of 15mm dia bore, (Minimum weight 15mm-105gms) complete all as specified & directed.

S&F in repairs fancy type Bib tap standard Foam flow with flange of PTMT any colour high pressure screwed for iron pipe of 15mm dia bore, (Minimum weight 15mm-105gms) complete all as specified & directed.

S&F in repairs Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms) all as spd and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs Angle stop valve of PTMT any colour high pressure screwed for iron pipe of 15mm dia bore, (Minimum weight 15mm-90gms) complete

S&F in repair 600mm long PVC connection pipe fixed to 15mm dia pipe complete

S&F in repair 450mm long PVC connection pipe fixed to 15 mm dia pipe complete.

S&F in repair brass chromium plated bottle traps for WHB with inlet and outlet screwed for pipe 32mm bore or connections including necessary packing, union and cap and fixed complete all as spd and as directed.

Hacking out old broken glass (any thickness, size, quality or decription) from wooden or steel frames glazed with putty or fixed with beads exc 1.5 Sqm in size.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n exc 0.5 Sqm in each pane all as spd

M&L for 4mm thick figured glass, pin head type and glazing with oil putty or fixed with bead/glazing pins in squares n exc 0.5 Sqm in each pane all as specified.

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engr-in -Charge.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repair 100mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair ball brass valves, high pressure, with polythene float and fly nut, screwed for iron pipe or brass ferrule 25 mm bore complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm bore complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 15mm thick screed bed in CM (1:4) complete all as spd.

Disconnecting existing tanks for repair, Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, 5000Ltr capacity including washing with bleaching powder and reconnecting cleaned tank complete all as specified and directed. Note: The contractor should mention date of cleaning with white paint.

Disconnecting existing tanks exc 250 ltrs and not exc 500 ltrs., setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt from tanks and from mouths of circulating pipes etc. Note: The contractor should mention date of cleaning with white paint.

All as per Srl Item No above but exc 500 ltrs and not exc 1000 ltrs.

S & F in repair 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed

S&F in repairs fancy type 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete in all respect all as specified.

S&F in repairs Vitreous china wash hand basin, white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified. Note: Rate to be quoted considering work upto 10mtr height, including cost of scaffolding

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc.

S&F anodised aluminium snap grid of size 605 x605 mm frame work for false ceiling including straining with GI wire 4 mm thick all as specified.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/ G.I./M.S. as per specification and drawing

S& F in repairs 2nd class Hardwood 15 mm Veneered decorative Boarding, fixed with nails in any situation planed one side and edges tongued and grooved or rebated Fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work all as specified and directed.

S&F in repairs Steel windows with side hung shutters and frame including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed

S&F for SS auto hinges 100 mm medium weight all as specified and directed.

S&F extruded aluminium alloy handle, fabricated type, anodised of size 100 mm complete all as spd and directed.

Supply and fixing in repairs double ball bearing SS 304 turbo vent with FRP base 1.5x1.0m and throat dia 0.61m, belly dia 0.91m & height 0.76m Note: Rate to be quoted considering fixing upto 10mtr height.

Dismantling water storage tanks of any description exc 250 & n exc 500 liters capacity and removing from site complete all as specified.

S&F for Rotational moulded polythylene 500 liters capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball and tank nipple complete all as specified

S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms)

S & F in repair 32 mm dia waste pipe all as specified and directed.

S&F in repairs 12mm thick frosted Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required with necessary stainless steel fixing patches and lock patches etc. all as specified and directed.

S&F 900mm long Stainless steel AISI 316 Door handles fixed to toughned glass door complete all as specified and directed.

S&F Double action floor door spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainles steel cover governing pivot made of brass, heavy duty wt capacity upto 100kg fixed to door complete all as specified and directed.

S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specifiedand directed.

M/s AARUSHI ENTERPRISES (BID ID -3326269)

Micky Traders (BID ID -3326682)

Shri Radhey Associates (BID ID -3326562)