Providing light point wiring, UPS point wiring, AC point wiring and Telephone point wiring inside the Department of Electronics and communication Engineering south wing building in NITK

Amount

Wiring for Power Circuit : Wiring for Light/power circuit using 2run x 4 sqmm + 1 run x 1.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Wiring for Power Circuit : Wiring for Light/power circuit using 4run x 4 sqmm + 1 run x 1.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Wiring for Lighting Circuit : Wiring for Light/power circuit using 2run x 2.5 sqmm + 1 run x 1.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Wiring for Lighting Circuit : Wiring for Light/power circuit using 2run x 1.5 sqmm + 1 run x 1.0 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Wiring for Power Circuit : Wiring for Light/power circuit using 4run x 10 sqmm + 1 run x 2.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Wiring for Power Circuit : Wiring for Light/power circuit using 2run x 6.0 sqmm + 1 run x 1.5 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Wiring for Power Circuit : Wiring for Light/power circuit using 2run x 16.0 sqmm + 1 run x 4.0 sqmm of FRLS PVC insulated 1100 V grade, mutistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694 : 1990 and confirming to GTP of GROUP - A Finolex / RR Kable /Polycab / V Guard make

Telephone cable: Supplying and drawing PVC flexible Two pair telephone unarmoured tinned copper cable. – Make: D Link, Finolex, Polycab- 2 Pair

Telephone cable: Supplying and drawing PVC flexible Fifty pair telephone unarmoured tinned copper cable. – Make: D Link, Finolex, Polycab- 50 Pair

Supply of LT UG cable - 3.5C X 35 Sq.mm: Supplying of LT UG cable of following size having aluminium conductor PVC insulated sheathed galvanized, XLPE, steel wire / steel strip armoured cable with PVC outer sheathing 1.1KV class (conforming to IS 1554) Class 'A' PVC cables, - 3.5C X 35 Sq.mm.(14 GI strip – 4 x 0.8mm) MAKE: HAVELLS/ UNISTAR/ GLOSTER / POLYCAB / UNIVERSAL / NICCO/ SBEE/ TORRENTO/ CCI - Tropodur make.

Supply of LT UG cable - 3.5C X 50 Sq.mm: Supplying of LT UG cable of following size having aluminium conductor PVC insulated sheathed galvanized, XLPE, steel wire / steel strip armoured cable with PVC outer sheathing 1.1KV class (conforming to IS 1554) Class 'A' PVC cables, - 3.5C X 50 Sq.mm.(16 GI strip – 4 x 0.8mm) MAKE: HAVELLS/ UNISTAR/ GLOSTER / POLYCAB / UNIVERSAL / NICCO/ SBEE/ TORRENTO/ CCI - Tropodur make.

Laying UG cable : Labour charges for laying of 35 to 95 sqmm size LT cable cable in existing trench / on wall/ stone ware /RCC hume pipe /ceiling using necessary clamps, saddles, screws, bolt and nuts, using Wooden / Aluminum rollers, as directed by the Engineer in charge - 35 to 95 sqmm

Aluminium End Terminal ( lugs ) - 35 Sqmm : Supplying and fixing of Aluminium End Terminal (lug) and crimping and wiring to terminal point. Make: Dowells / Braco / Ravi / Jainson/ MIC

Aluminium End Terminal ( lugs ) - 50 Sqmm : Supplying and fixing of Aluminium End Terminal (lug) and crimping and wiring to terminal point. Make: Dowells / Braco / Ravi / Jainson/ MIC

Aluminium End Terminal ( lugs ) - 25 Sqmm : Supplying and fixing of Aluminium End Terminal (lug) and crimping and wiring to terminal point. Make: Dowells / Braco / Ravi / Jainson/ MIC

Aluminium End Terminal ( lugs ) - 16 Sqmm : Supplying and fixing of Aluminium End Terminal (lug) and crimping and wiring to terminal point. Make: Dowells / Braco / Ravi / Jainson/ MIC

25mm size Heavy duty cable glands: Supplying and fixing of following size heavy duty cable glands suitable for UG cable of 1.1KV class ( metal only )– 25mm - Make - Dowel, Mico, Glowstar

Open Conduit system: Supplying heavy gauge PVC conduit pipe of 20mm dia. 2 mm thick PVC conduit conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using WF screws. Make: Finolex/ Universal/ VIP/ Bajaj Plast/ Polycab/ Nelco/ equivalent other makes.

Open Conduit system: Supplying heavy gauge PVC conduit pipe of 25mm dia. 2 mm thick PVC conduit conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using WF screws. Make: Finolex/ Universal/ VIP/ Bajaj Plast/ Polycab/ Nelco/ equivalent other makes.

Open Conduit system: Supplying heavy gauge PVC conduit pipe of 32mm dia. 2.5 mm thick PVC conduit conforming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using WF screws. Make: Finolex/ Universal/ VIP/ Bajaj Plast/ Polycab/ Nelco/ equivalent other makes.

PVC Casing & Capping : Supplying and fixing of following sizes ‘class A’ make PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm etc as required. Make: Modi/ Classic/ Kaveri/ Polycab/VIP/Avonplast : 20mm size PVC casing and capping.

PVC Casing & Capping : Supplying and fixing of following sizes ‘class A’ make PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm etc as required. Make: Modi/ Classic/ Kaveri/ Polycab/VIP/Avonplast : 25mm size PVC casing and capping.

PVC Casing & Capping : Supplying and fixing of following sizes ‘class A’ make PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm etc as required. Make: Modi/ Classic/ Kaveri/ Polycab/VIP/Avonplast : 38mm size PVC casing and capping.

Point wiring using copper wire with switch: Point wiring using Class A materials: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade copper conductor flexible PVC insulated multi strand FRLS 2x1.5 Sqmm(P&N) & 1x1.0sqmm (E ) copper wire confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each out let etc., complete as per specification and direction of the Engineer Incharge. Short point above 3mtr up to 6mtr from tapping point to outlet via switch.

Point wiring using copper wire with switch: Point wiring using Class A materials: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade copper conductor flexible PVC insulated multi strand FRLS 2x1.5 Sqmm(P&N) & 1x1.0sqmm (E ) copper wire confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each out let etc., complete as per specification and direction of the Engineer Incharge. Medium point above 3mtr up to 6mtr from tapping point to outlet via switch.

Point wiring using copper wire with switch: Point wiring using Class A materials: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade copper conductor flexible PVC insulated multi strand FRLS 2x1.5 Sqmm(P&N) & 1x1.0sqmm (E ) copper wire confirming to the GTP with a 6 Amps flush type SP control switch shall be fixed on existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/ PVC round block complete for each out let etc., complete as per specification and direction of the Engineer Incharge. - Long point above 6mtr up to 10mtr from tapping point to outlet via switch

Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 4”x4”x3” size

Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 8”x6”x1.5” size

Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 10”x8”x1.5” size

Polished Wooden board: Supply and fixing polished wood board of following size made of not less than 15mm plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. – 12”x9”x1.5” size

Hylum plastic sheet 3mm thick: Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches regulators etc., and fixing on existing wood or metal box using N.F. screw as per the specification and direction of the Engineer-In-Charge.

Power board: Supplying and fixing of power board consisting of 8”x6”x1.5” polished wood board with base plate covered with 3mm thick hylum plastic sheet and consisting of 3 nos of 6 Amps switch,3 nos of 6 Amps 5 Pin socket etc. complete.for UPS -PB-1 - Make: Legrand, anchor, mk GM, Elle, Lisha, Cona

Power board: Supplying and fixing of power board consisting of 12”x9”x1.5” polished wood board with base plate covered with 3mm thick hylum plastic sheet and consisting of 3 nos of 16 Amps switch,3 nos of 16 Amps 5 Pin socket etc. complete.for UPS -PB-2 - Make: Legrand, anchor, mk GM, Elle, Lisha, Cona

Power board: Supplying and fixing of power board consisting of 10”x7”x3” polished wood board with base plate covered with 3mm thick hylum plastic sheet and consisting of 2 nos of 16 Amps switch,2 nos of 16 Amps 5 Pin socket etc. complete.for UPS -PB-3 - Make: Legrand, anchor, mk GM, Elle, Lisha, Cona

Power board: Supplying and fixing of power board consisting of 8”x6”x1.5” polished wood board with base plate covered with 3mm thick hylum plastic sheet and consisting of consisting of 1 nos of 16 Amps switch,1 nos of 16 Amps 5 Pin socket etc. complete.for UPS -PB-4 - Make: Legrand, anchor, mk GM, Elle, Lisha, Cona

Switch board: Supplying and fixing of switch board consisting of 4”x4” polished wood board with base plate covered with 3mm thick hylum plastic sheet and consisting of 1 no of 6 Amps switch,1 nos of 6 Amps 5 Pin socket etc. complete. - Make: Legrand, anchor, mk GM, Elle, Lisha, Cona

Telephone socket board: Supplying and fixing of board consisting of 4”x4” polished wood board with base plate covered with 3mm thick hylum plastic sheet and consisting of 1 no. of Telephone socket etc. complete. - Make: Legrand, anchor, mk GM, Elle, Lisha, Cona

MDF krone junction box: Supplying and fixing of 50 pair MDF krone junction box with KRONE, Module / Telephone cable termination.

Supply and fixing 6Amps SP Switch on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.

Supply and fixing 6Amps 3-way 5-pin Socket on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.

Supply and fixing Electronic Stepped Fan Regulator on existing switch board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.

Supply and fixing 6A Bakelite Ceiling Rose on existing board – Anchor/ GM/ Elle/ Cona/ Lisha/ Other equivalent makes conforming to GTP-A - as per IS 1293 and IS 3654.

Perforated cable tray: Supplying and fixing 2mm thick 300 x 50 mm size perforated cable tray with powder coated paint on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.

LED Batten fitting 1.20mtr (4feet) - Supplying of LED light batten fitting with integrated LED high quality diffuser with life of 25000 burning hours and 70% lumen maintenance with CRI> 80. Power input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved 2 years warranty against any manufacturing defect working under standard electrical condition.

Fixing fittings: Fixing all types all capacities fluorescent / false ceiling / spot light / CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos. of round blocks, clamps, necessary scaffolding, tools & labour complete.

Recess/Surface mounting type 36W LED Luinaire: Supplying of recess/surface mounting type modular panel light 2’x2’ 36W LED luminaire comprising of pressure decast/extruded luminium housing, with spring loaded false ceiling clA, Power LEDs with CCT 6500 degree K, CRI> 70%. efficacy > 100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.

Fixing fittings: Fixing all types all capacities 36W LED Luinaire for false ceiling / spot light / CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, required nos. of round blocks, clamps, necessary scaffolding, tools & labour complete.

70W LED FLOOD LIGHT: Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with 70W System Power consumption. LED Efficiency> 1301m/w, nominal CRI >75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia

Fixing LED floodlight fitting over existing pole / OR any other pipe using required size of reducer, wiring using suable wires. Including clA, bolts, nuts and wiring using suitable capacity wires.

48” Sweep 5 Star [1200mm]-Regular model ceiling Fan: Supplying of ceiling Fan with Capacitor rating as per guideline of BEE 5 star rating and IS 374/79 and also comply with IS: 1709/1984 with latest amendment rated voltage 220V 50Hz, rated power input 48 W +/-10% rated current as per IS 374/79, rated power factor 0.90 lagging(min) Rated speed 350+/- 10% RPM, rated air delivery 210 +/- 10% cubic meter minimum, rated service value 4.2 CMM / W, three blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 as per IS specification, Motor winding Temp rise shall not exceed 75deg C over and ambient of 40 resistance method at 245 v, Insulation resistance shall not be less than two Mega Ohms (2M ohms) Leakage current should not exceed 210 Micro Amp Power input, W & current, Air delivery and Fan speed as per IS :374/1979 with latest amendment with 2 year manufacturer warranty.

400mm Sweep Wall mounting fan: Supplying 400mm sweep copper winding wall mounting fan suitable to operate at single phase 230v AC supply Make: Havells/Usha/Alnonard/Crompton/Polard.

Fixing of Wall mounting fan: Fixing of ceiling / wall mounting fan of all capacities and all types with necessary clamps, angular, / to the existing S hook, with fan regulator, together with supplying and fixing a 5 ampere ceiling rose, necessary length of 23 / 0.0076” PVC insulated twin twisted copper wire and wiring complete.

GI pipe -19mm dia: Extra length of GI pipe of class B – 19mm dia for down rod

MCB Distribution board: Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.- Double Door DB 6 Way TP & N

MCB Distribution board: Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.- Single Door DB 4 Way SPN

MCB Distribution board: Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.- Double Door DB 12Way SPN

MCB Distribution board: Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clA, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure.- Double Door DB 8Way SP&N

4Way regular MCCB: Supplying and fixing 4way regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2.

8Way regular MCCB: Supplying and fixing 8way regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suitable earthing system, on wall/wood board/flush mounting using required cl A , bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door with necessary bus bar completely wired to use on 440V 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCB's as outgoings confirming to IS/IEC 60898 - 2.

Moulded Case Circuit Breaker (MCCB) - Four Pole 160 Amps 25 kA: Supplying and fixing Four Pole 160 Amps 25 kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- Cicrcuit /Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.

Moulded Case Circuit Breaker (MCCB) - Four Pole 200 Amps 35 kA: Supplying and fixing Four Pole 200 Amps 35 kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Micro processor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- Cicrcuit /Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.

ELMCB -32A 4Pole: Supplying, fixing and wiring 32A 4Pole Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board etc. complete. Make: Siemens/L&T/Schneider/Havells.

6-32A DP MCB: Supplying and fixing following rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 - 6-32A DP MCB

63A DP MCB: Supplying and fixing following rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 - 63A DP MCB

63A TPN MCB: Supplying and fixing following rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 - 63A TPN MCB

6-32A TPN MCB: Supplying and fixing following rating miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and ‘C’ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898 - 6-32A TPN MCB

20Amps SP&N Metal socket set of 2 pole: Supplying and fixing of 20Amps SP&N Metal socket set of 2 pole and earth plugs and socket for incorporating 32A DP MCB. The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired completely. Make :- Legrand / L&T / Havells / HPL / ABB

30/63Amps TP&N Metal socket set of 2 pole: Supplying and fixing of 30/63Amps TP&N Metal socket set of 2 pole and earth plugs and socket for incorporating 20A SP MCB(without MCB). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired completely. Make :- Legrand / L&T / Havells / HPL / ABB

MS angle iron frame work: Supply and fixing 75x75x6mm size MS angle iron frame work for mounting panel board with bolt and nuts, painted with two coats of anti-corrosive enamel paint over two base coats of red-oxide priming coat

Synthetic enamel paint in two coats: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Earth Electrode for grounding: Supplying, fixing and wiring earth electrode for grounding using 42mm dia 3.2mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in CC chamber of 400x400x400mm with cast iron cover and naming of pit. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all round with alternate layers of salt and charcoal from the bottom of CC chamber. The connection from the electrode is to be established through GI strip using bolts and nuts. The ground resistance should be below 100Ohms and earth to neutral voltage should always be less than 1V AC. The earthing test certificate should be produced by the authorised testing agencies.

Copper plate for grounding connections: Supplying and fixing of 600x600x3 mm size copper plate for grounding connections, using necessary fixing materials as required.

Copper Strips: Supplying and running of Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm copper strip,

Engaging labours : Engaging labours for dismantling, removing existing old wiring, conduits casing, capping, switch boards DB’s, light fixtures, fan and other electrical accessories. The work includes necessary labour, tools and plants, safety equipments etc., complete,

SUDHIR ELECTRICALS

Shantha Electricals and Engineers Pvt Ltd

GK Electricals

M/s Anugraha power services