Widening and Strengthining of Kohandaur Chandouka (ODR) Road in (With five year Maintainance)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. Including labour cess but excluding GST. As per MORTH clause 3.16 & 305 .

Excavation for roadwrok in soil with hydraulic excavator including cutting and loading in tippers trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to the embankment location within all lifts and lead upto 1000m. Including labour cess but excluding GST. As per MORTH Spec. No. 3.06 (301)

Construction of sub grade and earthen shoulders with approved materials obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 Including labour cess but excluding GST. As per MORTH Specification No. 3.18, (305)

Construction of embankement with approved materials deposited at site from roadway cutting and excavation from drain cutting and foundation of other structure graded and compacted to meet requirement of Table No. 300-2 Including labour cess but excluding GST. As per MORTH Specification No. 3.19, (305)

Construction of granular sub-base by providing coarse graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 Including labour cess, Royalty but excluding GST. As per MORTH Specification No. 4.01 (401)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Including labour cess, Royalty but excluding GST. As per MORTH Specification No. 4.14 (406, B)

Providing and applying Prime coat with SS1 grade bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. Including labour cess, Royalty but excluding GST. As per MORTH Specification No. 5.01

Providing and laying dense graded bituminous macadam(50 mm) with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction. Including labour cess, Royalty but excluding GST. As per MORTH Specification No. 5.4 (505, B)

Providing and applying tack coat with bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bitumenous surface cleaned with mechanical broom. Including labour cess but excluding GST. MORTH No. 5.02 (503-I)

Providing and laying bituminous concrete with higher capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous (VG-30) binder@ 5.4 percent of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and aligment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction. Including labour cess, Royalty but excluding GST. As per MORTH Specification No. 5.05 (507, B)

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades. Including labour cess, Royalty but excluding GST. as per drawing 602 Clause of MoRT & H

Earth work in excavation of foundation of structures as per drawing and technical specification, including, setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved materials. Including labour cess but excluding GST. As per MORTH Spec. No. 9.01

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compaced by vibration including curing for 14 days. Including labour cess, Royalty but excluding GST. As per MORTH Specification No. 9.03

RCC Grade M20 using batching plant transit mixer & manual placing. Including labour cess, Royalty but excluding GST. As per MORTH Specification No. 12.08 (1500, 1700, 2100-C, Case-i)

RCC Grade M30 using batching plant transit mixer & manual placing. Including labour cess, Royalty but excluding GST. As per MORTH Specification No. 12.08 (1500, 1700, 2100-E, Case-ii)

Supply, fitting and palcing uncoated HYSD bar reinforcement in foundation complete as per drawing and technical specification. Including labour cess but excluding GST. As per MORTH Specification No. 12.42 (1600)

Providing and Laying 40mm. Guage ballast with stone dust Complete. Including labour cess but excluding GST.

Brick Masonry work in cement mortar 1:3 in foundation complete excluding pointing and plastering as per drawing and Technical specification. Including labour cess, Royalty but excluding GST. As per MORTH Specification No. 15.04 (1300)

Pointing with cement mortar (1:3) on brick work in substructure as per technical specification. Including labour cess but excluding GST.As per MORTH Specification No. 15.08 (1300 & 2200).

Plastering with cement mortar (1:3) on brick work in substructure as per technical specification. Including labour cess but excluding GST. As per MORTH Specification No. 15.09 (1300 & 2200).