Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC 202 209 VISHALA SUPRIM OPP TORRENT POWER SUB STATION S P RING ROAD NAVA NIKOL AHMEDABAD 382350 INDIA | AHMEDABAD | AHMEDABAD | GUJARAT | 382350 | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹24.3 L+₹1.3 L (5.77%)Rejected-AOC | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹25.8 L+₹2.9 L (12.6%)Rejected-AOC 64 A JASRAJ MANSION 1ST FLOOR OLD HANUMAN LANE KALBADEVI ROAD MUMBAI 400 002 | MUMBAI | MAHARASHTRA | 400002 | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹25.9 L+₹2.9 L (12.7%)Rejected-AOC B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L4 | Rejected-AOC REJECTED | |
| 5 | L5₹25.9 L+₹3.0 L (12.9%)Rejected-AOC 38 30 92 SAI NAGAR MARRIPALEM VISAKHAPATNAM 530 018 | VISAKHAPATANAM | ANDHRA PRADESH | 530018 | L5 | Rejected-AOC REJECTED |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
25 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW BHANDUP
GE(NW) BAHDNUP, MUMBAI
ADDN AND ALTN SPECIAL REPAIR TO WOODEN, STEEL WINDOWS AND GRILLS IN BUILDING NO. P-207 P-208 AND PROVN OF STREET LIGHT ALONG NEW ROAD BETWEEN GATE NO 06 AND BUILDING NO-273 AT NCHC POWAI UNDER GE(NW) BHANDUP
2022_MES_550678_2
8224/B
Open Tender
Civil Works
Item Rate
180 days
POWAI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(NW) BHANDUP
₹70,000
Yes
5 Dec 2022
4 Oct 2022
26 Oct 2022
4 Oct 2022
25 Oct 2022
11 Oct 2022
Amount
Taking down chowkats without taking off shutters from the frame exc.1.50 Sqm and not exc. 4.00 Sqm each complete all as specified and directed.
Taking down chowkats without taking off shutters from the frame n.exc.1.50 Sqm complete all as specified and directed.
Taking down cement or cement lime plaster on brick or stone wall etc., including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.
M & L for 18 to 20 mm thick Udaipur Green slab (table rubbed & Polished) including moulding of edges in single piece as in window, Chills, jambs, steps, cooking platform like over & including 15 mm thick cement mortar screed bed in CM 1:4 also including pointing with admixture of pigment to match with the shade of stone slab complete all as specified and directed.
M & L for Rendering 10 mm thick (1:4) CM on fair faces of brick work or concrete surfaces complete all as specified and directed.
M&L for 15 mm thick rendering in Cement Mortar 1:4 in two coats (10 + 5) with water proofing compound including finishing the surface even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid separately)
Supply Only integral water proofing compound
S&F IInd class hard wood plain solid straight chowkats and framed rebated on the solid rounded put togeather with glue pinned at joints complete all as specified and directed.
S&F plain framed factory made pannelled shutters of 2nd class HW 35mm thick with panel of 12mm thick ply wood(BWR Quality) and styles as per IS 1003(part-I) complete all as specified and directed.
M & L for 2nd class hard wood (SAL) glazed and skelton shutters, 35mm thick, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, Chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc sizes of members of shutters as specified in SSR Part I Section 8 cluase 8.20(a) and fitted to chowkats complete all as specified and directed.
M&L for MS hold fasts size 25x6mm FI fixed to chowkats complete all as specified and directed.
M & L for Providing PCC 1:2:4 type B1 cement concrete in bed blocks for hold fasts complete all as specified and directed.
S&F alluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminium alloy and fixed of length of bolt 300 mm complete all as specified and directed.
S&F aluminium section in sliding windows/ventilators ,any type (sliding on minimum two PVC roller of best qulaity for each shutter), powder coated in approved colour (Thickness of powder coating not less than 50 micron), aluminium section (medium weight of series 'B') as section directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing glass/XPM jali and all necessary fittings complete, screws, plugs for fixing screws, etc complete all as specified and directed. Notes : (i) Weight of aluminium sections shall only be measured. (ii) Rate quoted by the contractor shall deemed to be inclusive of all necessary fittings and fixture such as roller, handle locks etc. Quoted rate shall be deemed including cost of rubber beading or gasket etc and will be not measured separately. (iii) Glass pane and wire meshwill be measured and paid separately under relevant items as supply only. .
Supply only 4mm thick Sheet glass, ordinary quality in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
Supply only 4mm thick Sheet glass, ordinary quality in squares exc 0.5 sq. m in each pane complete all as specified and directed.
Supply only figured glass,tinted colour, pin head type,4mm thick, in square n.exc.0.5sqm in each pane for fixing aluminium frame complete all as specified and as directed.
Supply only aluminium wire cloth 0.45mm nominal dia of wire and arrange width of aperture 1.40mm for fixing in aluminium windows along with complete all as specified and directed.
S&F aluminium anodised Grills of approved design for window / ventilators and fixing with F/U channel complete all as specified and directed. Note: The Grills shall be of make as approved by the GE.
S&F and mild steel framed work as in grills, greating and guard bar with end of bars shouldered and / or reveted or forged into spikes nad similar works confirming to Fe-410 and Fe-310 complete all as specified and directed.
M & L for preparation of new surfaces on wall and applying two coats of 100 % Exterior weather resistance acrylic emulsion paint over a coat of acrylic primer incl. complete removal of existing treatment and necessary scaffolding complete all as specified and directed
M&L for preparation new plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of primer complete all as specified and directed.
M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description exc. 10Cm width or girth incl. Preparation of surfaces complete all as specified and directed.
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and shown in drg for SI No. 8095 on ser page No. 160 in SSR-2010 (Pt-II), complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing for SI No.8080 on ser page No.156 in SSR-2010 (Pt-II), complete all as specified and directed.
S&F stainless steel butt hinges, medium weight, 100mm long, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, 100 mm long, complete all as specified and directed.
S&F aluminium anodised bow handles of 100mm size, fabricated type of extruded section fixed with screws to shutters, complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.
S&F 7 metre long hot dipped galvanised octagonal poles with top A/F 70 mm bottom A/F 130 mm ,made out of 3 mm thick HT sheet alongwith base plate of size 220x220x12mm ,including 1500 mm long single/double arms bracket made out of 48 mm dia,GI pipe,M20 in PCD 205 mm,700mm long and projected 100mm,"J" type EN8 grade set of 4 Nos foundation bolts along with tempalates,also including provision of the followings :- a)MCB,SP,6A,230v,B series,10KA mounted on and including 3 mm thick plastic laminated sheet-01 No. b) 4 way connector ,bolt type having locking arrangement,weather proof and water proof control space: 01 No. Notes :- a) The rate quoted shall also be deemed to include the cost for provision of 50mm bore PVC pipe from cable trench to centre of the pole concrete. b) The rate quoted shall also be deemed to include the cost for connecting with including suitable lugs of the existing incoming and outgoing LT UG cable of any size in the pole box of new octagonal pole. c) The concrete for foundation ,Reinforced and form work will measured and paid seperately. d) The existing light fittings retrived from item No 01 here in before shall be refixed at the pole and the quoted rate shall also be deemed to include the cost of above mentioned element. e) The excavation and earth work for foundation of pole shall be measured and paid separately. Make :- Crompton/Phillips/Wipro as approved by the GE.
Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
Supply and drawing through the pole for making connection to the light fittings from connector , 3 Core, Copper cable,PVC insulated and sheathed heavy duty 1100 volt grade multistranded copper conductor (FRLS) cable 1.5 sqmm in PVC conduit complete all specified and directed.
Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 16 Sqmm, 4 core complete all as specified and directed.
M&L for Excavation in trenches n.exc 1.5 m wide and n. exc 1.5 m in depth and getting out in soft/loose soil for removing/laying of cables complete all as specified and directed.
M&L for Returning, filling including spreading , leveling , watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.
M&L for Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.
Supply and laying in trenches 40 mm bore of pipe High density polyethylene pipes (HDPE) for cable protection of pressure rating 6 kgf/cm2 complete all as per specified and directed.
Supply and laying/fixing GI pipe 50 mm dia light grade with all fittings with pole/ under the road for cable protection all as specified specified and directed.
M & L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in filling of steel tubular pole foundation complete all as specified and directed.
Material and labour for steel reinforcement for concrete (foundation of pole) Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified specified and directed.
Supply and fixing Analog switch 3P module, 24 Hrs programme to be installed in existing panel with all accessories and connected works complete all as specified and directed.
Deduct Credit for Demolished/ Dismantled material Rs. (-) 94100.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.
GAHARWAR BUILDERS
M/s Mukesh Engineers
Vishal Builders
Anjali Constructions
industrial suppliers
M/s Qureshi Construction Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .