REPAIRS TO CHAJJA PLASTER, FLOORING, ROOF AND OTHER BR REPAIR WORKS IN CERTAIN OTM ACCN OF APS NEW CANTT AND OTHER LEFT OVER UNITS UNDER AGE BR-II, NEW CANTT, PRAYAGRAJ

Amount

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore galvanised steel water tubing , medium grade, with all fittings fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20 mm bore galvanised steel water tubing , medium grade, with all fittings fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F 25 mm bore galvanised steel water tubing , medium grade, with all fittings fixed to walls and ceiling or laid in floors complete all as specified and directed.

Refixing old 15 mm dia bore galvanised steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing old 20 mm dia bore galvanised steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing old 25 mm dia bore galvanised steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

S&F joint free non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but not exc 0.16 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L joint free non skid, ceramic coloured tiles 7 to 8 mm thick area of each tile area of each tiles 0.18 sqm but not exceeding 0.38 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:6 complete of item all as directed.

Descriptionsame all as per serial item no 13 here in above but use as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing / rendering in CM 1:4 complete all as specified and directed.

S&F for vitrified ceramic coloured tiles of 10 mm thick (square/ rectangular) area of each tiles n. exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

S&F for vitrified ceramic coloured (Double charged) tiles of 10 mm thick (square/ rectangular) area of each tiles exc 0.36 Sqm but n exc 0.42 sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

Descriptionsame all as per serial item no 16 here in above but use as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing / rendering in CM 1:4 complete all as specified and directed.

S&F for heavy duty pavement endur tiles of size 300mmX300mm / 400mmX400mm of 10 mm thick coloured tiles for floor/pavement etc & jointed in neat cement slurry and pointed with white cement fixed with colour pigment to match colour of tiles including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F for glazed ceramic coloured wall tiles of size 450 mm x 300 mm x 6 mm to 7 mm thick as in skirting, dados, risers to steps, etc set and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in CM 1:4 complete all as specified and directed.

S&F for 16 to 18 mm thick granite stone (of any type) work (table rubbed and polilshed) as in steps, jambs, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F for 16 to 18 mm thick granite stone (of any type) work (table rubbed and polilshed) as in wall lining (veneering to wall) fixed over 12 mm thick backing plaster in CM 1:3 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F for 16 to 18 mm thick Udaipur green marble fixed on windows cills/staricase steps including 12mm thick in cement mortar (1:3) and pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:4 complete all as directed and specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick wall or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on other than fair faces of brick wall or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of newly plastered surface of walls and applying two coat of oil bound distemper Including preparation of surface with primer complete all as specified and directed.

M&L for Preparing of newly plastered wall surface of wall and applying two coats of cement base paint over a coat of cement wash primer complete all as specified and directed.

M&L for Preparing of newly plastered ceiling surface and applying two coats of white wash complete all as specified and directed.

M&L for Preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of white wash including cleaning of entire surface complete all as specified and directed.

M&L for Preparation of old / new plastered surfaces of wall and applying 1 to 2 mm thick white cement based wall care putty (Birla/JK white) on the surfaces of uniform thickness making surface absolutely smooth by grinding with sand paper on new surface of wall complete all as specified and directed.

M&L for Preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper Including cleaning of entire surface complete all as specified and directed.

M&L for Preparation of old decorated plastered or unplastered surfaces of walls and applying two coat of oil bound distemper Including cleaning of entire surface complete all as specified and directed.

M&L for Preparation of old plastered or unplastered surface of wall and applying one coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed.

M&L for Preparing of old plastered surfaces of wall and applying one coat of exterior weather proof paint with 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish as per manufacturer instruction complete all as specified and directed.

Complete removal existing treatment of wall and preparing of old plastered surfaces of wall and applying two coat of exterior weather proof paint with 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with and including one coat of primer and applying 1 to 2 mm thick white cement based wall care putty (Birla/JK white) on the surfaces of uniform thickness making surface absolutely smooth by grinding with sand paper as per manufacturer instruction complete all as specified and directed.

M&L for Preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

M&L for Preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

M&L for Preparation of newly steel surface and applying two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces , over 10 cm in width or grith not other wise described complete all as specified and directed.

M&L for Preparation of newly wooden surface and applying two coats of synthetic enamel paint over a coat of wooden base primer on new wooden surfaces , over 10 cm in width or grith not other wise described complete all as specified and directed.

Demolition of old brick work built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Description same all as per item no 43 here in above but "except brick" (brick used obtained from demolition) complete all as specified and directed.

M&L for half brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed.

S&F for structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) quality A including dismantaling of old structural steel work of any type and in any position complete all as specified and directed.

S&F for Rolled mild steel hollow sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, posts etc fixed with angle cleats or other connecting plates including dismantaling of old steel work of any type and in any position complete all as specified and directed.

Dismantling of plain / corrugated/semi corrugted steel sheeting of any gauge as in wall cladding or in roof covering complete all as specified and directed.

S&F for 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair vitreous china wash hand basin white, flat back of size 550mm X 400mm fixed on and including cast iron cantilever bracket, with 32mm dia CP waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.

S&F in repair vitreous china counter top wash basin ( Counter sunk type) , white, oval shape of size 600 X 400 X 185mm fixed in granite hole including cutting for and pinning in ends and fixed in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repair vitreous china table top wash hand basin (Table top type) , white, Square/ rectangle/oval shape of size 500 X 400 X 155mm fixed on granite top including cutting hole for waste pipe or for and pinning in ends and fixed in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repair CP bottel trap for wash hand basin waste discharge fixed with 32 mm dia hard pipe including cutting hole complete all as specified and directed.

S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 950 mm X 510 mm with bowl size 410 mm x 410mm x 230 mm complete all as specified and directed.

S&F in repair CP Pillar taps, cast copper alloy, fancy type quarter turn screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair CP Pillar taps (Swan neck type) cast copper alloy, fancy type quarter turn screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair CP stop valve of 15 mm bore fancy type with quarter turn long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed.

S&F in repair CP angle cock of 15 mm bore fancy type with quarter turn and cup, high pressure, handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm bore CP bib tap with quarter turn / half turn with wall flange fancy type, quarter, long body screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.

S&F in repair rotational moulded,HDPE water storage tank (white colour three layer) of 1000 ltrs capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair rotational moulded,HDPE water storage tank (white colour three layer) of 500 ltrs capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia, 60 cm long for WHB/urinal with cup, complete all as specified and as directed.

S&F in repair PVC waste pipe 40mm dia, 60 cm long for Sink with cup, complete all as specified and as directed.

S&F in repair 32mm dia LDPE pipe with fittings complete all as specified and as directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair 15mm bore PTMT Bib tap of standard quality of any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and as directed.

S&F in repair 15mm bore PTMT pillar tap of standard quality of any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and as directed.

S&F in repair wall mixer with provn for over head showers of 115 mm long bend pipe on upper side connecting legs and wall flanges quarter turn screwed down high pressure with ‘Hot’ or ‘Cold’ long screwed shanks screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair CP basin mixer (Swan neck type) cast copper alloy, fancy type quarter turn screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F Ball / float Valve 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs Ball / float Valve 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repairs Ball / float Valve 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs PVC tank cover for 500/1000 ltr over head tank complete including fixing the lid with the existing tank with PVC hinges and male and female locking system all as specified and directed

S&F in repair PVC low level flushing cistern of 10 liters capacity symphonic action type,including all fittings, white with inlet ,ball valve ,float and handle including brecket complete all as specified and directed.

S&F in repair 100mm dia stainless steel grating doom fixed with white cement complete all as specified and directed.

S&F in repair vitreous china Urinal, (Half stall type) (flat back), of size 635X395X420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, with CP spreader etc complete all as specified and directed.

S&F in repair vitreous china Urinal, (Bowl type) of size 465X355X265 mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2 with CP spreader etc complete all as specified and directed.

S&F in repair "Orissa" pattern vitreous china wash down water closet of size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair "Pedestal pattern" EWC vitreous china wash down water closed pan with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repair PVC water closet seat cover white, closed pattern with flat bottom & cover and hinging device and fixed with WC pan complete all as specified and directed.

S&F in repair CP waste coupling (half or full threaded) (minimum weight 32mm- 45gms/40mm-60gms of 32mm dia for WHB complete all as specified and directed.

S&F in repair PTMT corner glass shelf assembly consisting of 3.0 mm thick shelf fixed with SS screw & pvc rowal plug complete all as specified and directed.

S&F in repair PTMT glass shelf assembly consisting of 3.0 mm thick and 600mm long, 120mm wide shelf fixed with SS screw & pvc rowal plug complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair stainless steel soap dish fixed to plugs with ss screws complete all as specified and directed.

S&F in repair jet nozzle with 1.0 m PVC pipe for EWC complete with all fittings complete all as specified and directed.

S&F in repair CP two way angle valves /tap with flange 15mm bore fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair stainless steel toilet paper holder, superior quality,fancy type complete all as specified and directed.

S&F in repair ABS chromium plated health faucet with 1m long flexible CP pipe with wall hook complete with all fittings complete all as specified and directed.

S&F in repair ABS chromium plated shower rose of 90 mm dia size with shower Arm of swivel joints complete all as specified and directed.

S&F in repair stainless steel towel ring complete all as specified and directed.

S&F in repair stainless steel towel rail of 600 mm long complete all as specified and directed.

Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75/ 110 mm bore PVC stack clamps including securing ends of stays to wall or roof complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F 4mm thick E-boards tiles (Make: Everest) false ceiling with powder coated GI snap grid frame work (Make: Armstrong/Saint Gobain or equivalent as approved) including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.

S&F in repair 4mm thick E-boards tiles (Make: Everest) false ceiling board tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling complete all as specified and directed. NOTE : The complete ceiling work shall be done as per manufactures instruction and as directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

S&F Hollow PVC wall panelling consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site as per specifications complete all as specified and directed.

S&F for L/ U type section for hollow panelling fillet inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

Taking down chowkhat or frame with shutter area n exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified & directed.

Taking down chowkhats or frames with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Description same all as per Item 112 here in above but double extruded frame of size 65 X 125 mm complete all as specified & directed.

S&F 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain Flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified & directed. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately)

S&F 30mm thick factory made solid WPC (Wood Polymer Composite) (Wire mesh) door shutter consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified & directed. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately)

S&F factory made 30 mm thick flush door shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed.

S&F for UPVC casement windows with net & grill single or multi shutter turn window are made out of UPVC multi-cavity frames sections of 60X60X2.5mm suitably reinforced and double multi-shutters division are made by using sash million having 50X64X2.5mm multi-cavity UPVC section, suitably reinforced with GI and shutters are made out of 50X85X2.5mm UPVC section reinforced and welded in corners with EDPM gaskets provision for glass and for air tightt at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges, handles,stays etc complete. Mosquito mesh shutter is made out of UPVC extruded section of 61X27X2mm with GI channel of 1.2mm thick, welded in corners. Mosquito net of GI is filled in shutter with proper required accessories like hinges,MS grill of 12mm square MS bar are inserted in main frame & screwed by hidden screwing system with powder coating etc complete all as specified and directed. (Note: glazed shutters float glass thickness not less than 4.00mm and wiremesss shutter with SS wire mesh 0.36mm dia with aperture 1.4mm shall also be deemed included in quoted rates and no extra payment will be made separately)

Description same all as per Item 117 here in above but sliding window two track as per site requirements complete all as specified & directed.

Taking down shutters of wooden or aluminium door of any description n. exc 1 sqm each complete all as specified & directed.

Taking down shutters of wooden or aluminium door any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed.

Refixing wooden or aluminium door shutters of any description not exceeding 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete Note : Glass,boards , aluminium snap bead, rubber beading for aluminium door and window shutter if required new to be measured and paid separately.

Refixing wooden or aluminium door shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete. Note : Glass,boards , aluminium snap bead, rubber beading for aluminium door and window shutter if required new to be measured and paid separately.

Supply only new rubber beading of suitable size for fixing the glass/board in aluminium door/ window shutter complete all as specified & directed.

Supply only aluminium snap bead of suitable size for aluminium door and window shutter complete all as specified & directed.

M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast,Coping errection of posts etc complete all as specified & directed.

M&L for mild steel work as in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, hooks (stay) heavy for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F for mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified & directed.

S&F for factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified & directed.

S&F for factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete without glazing bar, dovetailed or welded complete all as specified & directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed.

S&F in repair 12mm thick Milky white Frosted Toughened Glass door with etching for making good any surface/wall door etc including necessary fittings, channel rails etc quality as approved, fixed with jointing material PVC flap at bottom to make fly proof with and including 450mm long stainless steel handles, 4 lever bottom lock ,top & bottom suitable magnet hinge holder for heavy glass shutters etc complete all as specified and directed.

S&F in repair aluminium anodised Grill of size 75 x 75x 4mm thick for windows , including joining cleat, anodized aluminum strip beading screw complete all as specified & directed.

S&F for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.

S&F in repair for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.

S&F in repair 18/19mm thick Fibre PVC celuka ply Board ,one side laminated ,commercial type,interior grade adhesive as in cup board/ wardrob shutters etc., fixed with stainless steel screw including complete all as specified and directed.

S&F in repair 18/19mm thick Fibre PVC celuka ply Board, both side laminated, commercial type,interior grade adhesive as in cup board/ wardrob shutters etc, fixed with stainless steel screw including complete all as specified and directed.

S&F for stainless steel continuous (piano) hinges,bright finished with width of flap 30mm (when open) complete all as specified and directed.

S&F for 100 mm long stainless steel cubboard handle of fancy type complete all as specified & directed.

S&F for 150 mm long stainless steel haps and staples of fancy type complete all as specified & directed.

S&F magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

M&L for 4mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

S&F in repair for 5.0 mm thick sheet glass ordinary quality and glazing with rubber beading/gaskit in square exc 0.5 sqm in each pane complete all as specified & directed.

S&F in repair 25 mm dia stainless steel curtain rod including fancy type brackets and holder for securing to curtain rod complete all as specified & directed.

S&F in repair stainless steel floor door stopper overall length of 150 mm complete all as specified and directed.

S&F in repairs aluminium (Die cast) body Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair Aluminium mortic Lock,4 Lever,100mm long fixed to Aluminum doors complete all as specified and directed Make Godrej/Link

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed.

S&F for 100 mm size stainless steel butt hinges medium weight etc complete all as specified & directed.

S&F for 150 mm long stainless steel door handle fancy type complete all as specified & directed.

S&F for 200 mm long stainless steel tower bolts of fancy type complete all as specified & directed.

S&F 300mm long stainless steel sliding door bolts , plate type with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple of fancy type complete all as specified & directed.

S&F in repair for 100 mm size stainless steel butt hinges medium weight etc complete all as specified & directed.

S&F in repair for 150 mm long stainless steel door handle fancy type complete all as specified & directed.

S&F in repair for 200 mm long stainless steel tower bolts of fancy type complete all as specified & directed.

S&F in repair 300mm long stainless steel sliding door bolts , plate type with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple of fancy type complete all as specified & directed.

S&F in repairs 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S&F in repair door seal strip of 32mm wide with Aluminium strip of size 19mm wide fixed with machine steel screw with washer, complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with wooden beads complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed

M&L for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring complete all as specified and directed.

M&L for Preparation of existing old plaster surfaces including removal of existing treatment of any layer and further applying two coat of Damp proof chemical course (Dr. fixit sure ceal or Smartcare hydroloc water proofing of Asian) on prepared plaster surfaces complete all as specified by the manufacturer instruction.

Cleaning and removing all scale and dirt etc from water storage tank of 250 to 500 ltrs capacity and from mouth of curculating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY patern and refixing the cover after cleaning all and specified and directed.

Cleaning and removing all scale and dirt etc from water storage tank of 500 to 1000 ltrs capacity and from mouth of curculating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY patern and refixing the cover after cleaning all and specified and directed.

Demolition of Stone slabs and tiles laid dry and dry or pointed of any description or thickness infloors, aprons etc.complete all as specified and directed.

M&L for 80mm thick M-35 grade factory made vaibratory cement concrete coloured (Red or yellow or both in combination) interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed.

M&L for chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor all as specified.

S&F in repair stainless steel railing of quality 304 of any size , sape and design wt not less than 5.0 kg per RM length as approved by GE complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer on roof with and incl disposal of tiles complete all as specified and directed.

Demolition of mud in roof, any thickness including plastering and leaping ( where full thickness recoved or only a part there of disposal off rubbish complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof padding over roof slab and other works complete all as specified and directed. (Note - Average thickness shall not exceed 40mm complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:3 with and incuding WPC (liquid form) @ 300ml per bag of cement all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed

Supplying and applying of High build elastomeric Water Proofing Roof Treatment coating based on pure, hydrophobic polyurethane (PU) , cold applied of spray / brush applied, Smart Care PU AQUA with an elongation of 450% and tensile strength of >1.5 N/mm2 as per ASTM D 2370, crack bridging ability of upto 4mm as per ASTM AS-NZ 4548, no leakage upto 7 bars of water pressure as per BS EN 12390 - 8, The system includes final base preparation, Apcoflor HFP 130 epoxy primer application and applying SmartCare PU AQUA or approved equivalent make in two coats with a consumption of 1.8 Kg per SQM on a primed surface with SmartCare Primer and a 40 GSM Fibre Mesh sandwiched in between, etc, complete as per Manufacturer’s specifications complete all as per manufacturer instructions complete all as specified and directed.

Schedule of Credit (MINUS) Rs. 66,984.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum

YASH ENTERPRISES (BID ID -3412643)

Channa Brothers and Co. (BID ID -3413330)