Electrical and associated work for Tool Room Area Phase-2

HINDUSTAN AERONAUTICS LIMITED ACCESSORIES DIVISION, LUCKNOW PQ FORM/ELIGIBILITY CRITERION-MATRIX

NAME OF THE WORK: "Electrical and associated work for Tool Room Area Phase-2"

Estimated Cost (in Rs.) 8,072,326.14

S# Intending bidders must meet the following eligibility criterion:

PART-A: Desirable Criteria

1 Name of the Individual / Firm / Company: * Mandatory

2 Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

4 Registration with HAL/ other organization if any

5 Address of Correspondence:

Contact Details: Contact person name: Designation: Mobile No:. Ph. No. with STD code: Email Id :

6 Contractor must give his acceptance to provide services as per ‘Requirement, Scope of work, Drawings’ and ‘Terms & Conditions' contained in Technical Bid.

7 Self attested copy of PAN Registration certificate issued by income tax authority.

PART-B: Essential Criteria

8* Self attested Copy of GST Registration Certificate.

9* Average annual turnover during the last 3 years, ending 31st March of previous financial year, should be at least 30% of the approximate estimated amount put to tender. Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year i.e. Fin Year 2022-23, 2023-24 & 2024-25. 2,421,698.00

10* Valid “A” class Electrical contractor licence of appropriate voltage issued by any state Govt. Under clause 45 of Indian Electricity Rules 1956 or as amended from time to time.

11* The Solvency required will be 40% of the approx. estimated amount put to tender. The solvency certificate shall be from a nationalized or scheduled bank and issued within a period of 12 months from the final date of Submission of tender (in Rs.). 3,228,931.00

12* EMD amount (in Rs.) 161,447.00

13* Self attested Copy of PF Code Certificate(if applicable).

14* Self attested Copy of ESI Number certificate (if applicable).

15* Experience of having successfully completed similar works as indicated in the work details during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following (in Rs.):-

i Three similar completed each work costing not less than 40% of estimated amount. OR 3,228,931.00 PO no.: Value : Completion Date: Customer:

3,228,931.00 PO no.: Value : Completion Date: Customer:

3,228,931.00 PO no.: Value : Completion Date: Customer:

ii Two similar completed work costing not less than the amount equal to 50% of the estimated cost. OR 4,036,164.00 PO no.: Value : Completion Date: Customer:

4,036,164.00 PO no.: Value : Completion Date: Customer:

iii One similar completed work costing not less than the amount equal to 80% of the estimated cost. 6,457,861.00 PO no.: Value : Completion Date: Customer:

PART-C: Declaration

16 DECLARATION I ACCEPTED/NOT ACCEPTED

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

17 DECLARATION II ACCEPTED/NOT ACCEPTED

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. 5.I/We are not debarred / blacklisted from any Govt agencies, if debars for specified period reason for debar and copy of resumption of same shall be provided. 6. I/We have not concealed any information which may adversely effect my qualification.

18 DECLARATION III COMPLIED/NOT COMPLIED

I/We declare and confirm that all the documents related to NIT mentioned at Technical Bid Document Sl.No.2 and 3 have been attached with the technical bid.

Name of Bidder:

* 1. To be filled by Bidder essentially and carefully. Supporting documents must be attached as proof. Clarifications shall be sought w.r.t. information provided with tender documents. 2. Similar works implied that works related to HT/LT Electrical Works in nature. Mere supply of electrical goods does not mean qulification in the tender. 3. Scanned copy of completed work orders and completion certificate issued by respective clients to be attached. If the completion certificate is form private organization the same shall be uploaded with TDS certificate. 4. The work shall be completed as a whole, Partial value/completion will not be considered. 5. The Bidders are requested to attach scan copies of all the relevant / desired / required proofs/ documents on e-portal, failing which tender shall be summarily rejected without assigning any reason to bidders.

HINDUSTAN AERONAUTICS LIMITED ACCESSORIES DIVISION LUCKNOW PRICE BID

Electrical and associated work for Tool Room Area Phase-2

Sl.No. DESCRIPTION OF WORK UNIT QTY Unit Cost Total Cost

ELECTRICAL WORKS:

Light/Fan/Exhaust Fan Point wiring

1 Supply & making One Light point/fan point/exhaust fan point/call bell point controlled by one modular type switches, 6 Amps 230 Volts with 1.5 sqmm single core or 1.5 sqmm 2 or 3 core multistranded Circular Sheathed Cable With Rigid Conductor, P.V.C. insulated, copper FRLS type conductor multi stranded wire of 1100/660 Volts grade in heavy duty P.V.C. pipe with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sq mm FRLS PVC insulated copper conductor single core etc. including all accessories such as bends, J.B,tees, ceiling rose, batten holder, MS Box etc. required for point wiring work. The pipe shall be laid concealed in wall, partially it may be flush to the wall as per site requirement. The work also covers wiring for presence sensor/Motion sensor(if any) or as per site requirement and as per direction of Enginner In charge. Nos 80 ₹ 0.00

2 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Nos 50 ₹ 0.00

3 Supply & making One (half point) with 5 pin, 6 Amps modular socket controlled by 6 Amps switch modular type on the same board with other switches with 1.5 sqmm, PVC. insulated,copper FRLS type conductor, multi stranded wire. The Work must be done as per direction of Engineer-In-Charge No. 15 ₹ 0.00

4 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

i 25 mm Mtrs 50 ₹ 0.00

ii 32 mm Mtrs 50 ₹ 0.00

Sub-Main/Circuit/Power Point Wiring

5 Wiring for circuit /submains wiring alonghwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface /recessed/Floor in heavy duty class PVC conduit as required.

i 2 x 2.5 sqmm (for phase & neutral) + 1 x 2.5 sqmm (for earth) + 1 x 1.5 sqmm (for Inverter) Mtrs 200 ₹ 0.00

ii 2 x 2.5 sqmm (for phase & neutral) + 1 x 2.5 sqmm (for earth) Mtrs 400 ₹ 0.00

iii 2 x 4 sqmm (for phase & neutral) + 1 x 4 sqmm (for earth) Mtrs 500 ₹ 0.00

iv 2 x 6 sqmm (for phase & neutral) + 1 x 6 sqmm (for earth) Mtrs 300 ₹ 0.00

Power Point (Single & 3 Phase)

6 Supply and Fixing Following modules GI Box along with modular base & cover plate and balnking for modular switches in recess etc as required. The work includes removing of old damaged boxes and cover plate etc.

i 1 or 2 module No. 10 ₹ 0.00

ii 6 Module No. 20 ₹ 0.00

iii 12 Module No. 15 ₹ 0.00

7 Supply and Fixing Following modular switch/socket/MCB on the existing modular plate & switch box including connections but excluding modular plate etc as required.

i 5/6 A switch No. 60 ₹ 0.00

ii 15/16A switch No. 60 ₹ 0.00

iii 3/5 pin 5/6A Socket No. 60 ₹ 0.00

iv 3/6 pin 15/16A socket No. 40 ₹ 0.00

v Fan Regulator 4/5 Step 1 Module No. 20 ₹ 0.00

vi Mini SPMCB 20/25A modular No. 20 ₹ 0.00

8 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. No. 30 ₹ 0.00

9 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. No. 20 ₹ 0.00

10 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. No. 8 ₹ 0.00

11 20A Industrial Type: Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Nos 10 ₹ 0.00

12 Supply & making One independent industrial power point IP 67 protected three phase 415 V socket outlet with 4 pole and earth metal enclosed plug top alongwih C curve ,TPN MCB of same rating in sheet steel enclosure in recess with chained metal cover for the socket outlet, angle iron support as per requirement and complete with connections, testing & commissioning etc as required.

i 32 Amp (3P+N+E) Nos 10 ₹ 0.00

ii 63 Amp (3P+N+E) Nos 5 ₹ 0.00

13 Supply & installation of following Vertical TPN Switch Fuse Units in SS enclosure with spreader terminals and phase barriers, suitable for DIN fuse Link of following capacities in Sheet metal enclosure and complete with necessary consumables, fuses. The Work must be done as per direction of Engineer-In-Charge.

ii 125A Nos 5 ₹ 0.00

14 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, blanking, powder painted including earthing etc. as required. The wire/cable termination must be done with Copper/aluminium pin type lug as per requirement (But without MCB/RCCB/Isolator).

i 12 way (2 + 12), Double door Nos 3 ₹ 0.00

15 Supply and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, blanking powder painted including earthing etc. as required. The wire/cable termination must be done with Copper/aluminium pin type lug as per requirement (But without MCB/RCCB/Isolator).

i 4 way (4 + 12), Double door Nos 2 ₹ 0.00

ii 6 way (4 + 18), Double door Nos 2 ₹ 0.00

16 Supply and fixing SP, 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Nos 96 ₹ 0.00

17 Supply and fixing Following rating , Double pole, 230 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

i 40 Amp Nos 3 ₹ 0.00

18 Supply and fixing Following rating, four pole, 415 volts, isolator in the above MCB DB complete with connections, testing and commissioning etc. as required.

i 63 Amp Nos 2 ₹ 0.00

ii 100 Amp Nos 2 ₹ 0.00

19 Supply & Laying of XLPE insulated, PVC sheathed Armored, 1.1 KV grade, Aluminium conductor power cable, conforming to IS 7098 (Part-I). Concealed cabling can be done to cut/chase the wall or in trunch after laying of cable wall/Trunch shall be finished as original & if cable laid on wall then use clamps, cable trays (cable tray shall be provided by HAL) for fixing the cable. Cable to be laid as required at site and as per the direction of Engineer-In-Charge.

i Size of cable 2 core x 25 sqmm Mtrs 200 ₹ 0.00

ii Size of cable 4 core x 10 sqmm Mtrs 200 ₹ 0.00

iii Size of cable 4 core x 25 sqmm Mtrs 300 ₹ 0.00

iv Size of cable 3.5 core x 95 sqmm Mtrs 300 ₹ 0.00

v Size of cable 3.5 core x 240 sqmm Mtrs 400 ₹ 0.00

20 Supply & Laying of PVC/XLPE INSULATED (HEAVY DUTY) ELECTRICAL CABLES FOR WORKING VOLTAGE UPTO AND INCLUDING 1100 VOLTS TO IS : 1554 (PART-I) 1988 with copper conductor including termination as per requirement. Concealed cabling can be done to cut/chase the wall, after laying of cable wall shall be finished as original & if cable laid on wall then use clamps for fixing the cable. Cable to be laid as required at site and as per the direction of Engineer-In-Charge.

i 4C x 4 Sqmm Cu-Cable Mtrs 200 ₹ 0.00

ii 4C x 6 Sqmm Cu-Cable Mtrs 200 ₹ 0.00

iii 4C x 10 Sqmm Cu-Cable Mtrs 100 ₹ 0.00

Cable End Termination

21 Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

i 2C x 25 sqmm Al Arm LT cable Set 8 ₹ 0.00

ii 4C x 10 sqmm Al Arm LT cable Set 8 ₹ 0.00

iii 4C x 25 Sqmm.Al Arm LT cable. Set 20 ₹ 0.00

iv 4C x 95 Sqmm.Al Arm LT cable. Set 20 ₹ 0.00

v 3.5C x 240 Sqmm.Al Arm LT cable. Set 10 ₹ 0.00

Earthing Connection

22 Supply, installation, commissioning & testing of complete set of Maintenance Free Chemical Earthing with Copper Bonded Electrode Diameter 17.2 mm (approx), Length-03 meter (250 microns) UL listed with 25x6x150 mm copper strip exothermically welded at top of the rod in T shape for connecting strip or wire with RoHS complied environmentally carbon based backfill compound (Maintenance free type)-25 Kgx2 bag with 400mmX400 mm Cl pit cover with civil work and checking for earth resistance less than 3 Ohms. Make: Dehn/OBO/JEF/CAPE Nos 20 ₹ 0.00

23 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Mtrs 300 ₹ 0.00

24 Supply and laying 25 mm X 5 mm GI strip at 0.50 meter below ground as strip earth electrode, including connection/termination with nut, bolt, spring, washer etc as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm). Mtrs 300 ₹ 0.00

Lighting Fixtures

25 LED Panel light 2x2 ft. (System lumen efficacy ≥120 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 36 Watt Note: 50 Drivers to be supplied along with light within the supplied cost as spare. Nos 80 ₹ 0.00

26 LED Batten light (System lumen efficacy ≥120 lm/Watt) Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).-36/40 watt Nos 15 ₹ 0.00

27 LED Down lighter (System lumen efficacy ≥105 and <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C)- 12-15 Watt Nos. 30 ₹ 0.00

28 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray With perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

i 150 mm width X 50 mm depth X 1.6 mm thickness Mtrs 50 ₹ 0.00

29 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

i 150 mm width X 50 mm depth X 1.6 mm thickness Each 6 ₹ 0.00

30 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

i 150 mm width X 50 mm depth X 1.6 mm thickness Each 6 ₹ 0.00

31 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

i 150 mm width X 50 mm depth X 1.6 mm thickness Each 6 ₹ 0.00

Floor Cable Manager

32 Supply and Installation of Under Floor Trunking, Size-150mmx38mmx2mmx2mm - 2 compartment and length 2.5 mtr Make: Legrand/Honeywell Nos 25 ₹ 0.00

33 Supply and Installation of Joint sleeves for Under Floor Trunking, Size-150mmx38mmx1.6mmx1.6mm and length 75mm Make: Legrand/Honeywell Nos 20 ₹ 0.00

34 Supply and Installation of Access Outlet Box-24 M for under floor trunking- Top recess-20mm with metallic Lid, Height 90-105mm Make: Legrand/Honeywell Nos 15 ₹ 0.00

Ceiling Fan/Exhaust Fan/Air Circulator

35 Supply and installation of 450 mm, 1440 RPM Air circultor fan , steel body AC single Phase. Work must be done as per direction of Engineer-In-Charge. All material required for the work shall be supplied by the contractor. Warranty card duly filled and stamped by dealer is to be submitted to engineer incharge. Nos 15 ₹ 0.00

36 Supply and Fixing of industrial type pedestal fan, metal body, conforming to IS 2997 of 450 mm 230 volts, 50 Hz., Min Air Delivery 125 CMM, Max Input Power 100 Watts, Capacitor Type Fan Motor, RPM min 1400 , Ociilating type, Class E insulation of make Khaitan/Crompton/Orient/Almonard with speed control. The work includes assembly of fan. Work must be done as per direction of Engineer-In-Charge. Warranty card duly filled and stamped by dealer is to be submitted to Engineer in charge. Nos 40 ₹ 0.00

37 Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm, 900 RPM with blades, frame and louvers. Work must be done as per direction of Engineer-In-Charge. All material required for the work shall be supplied by the contractor. Warranty card duly filled and stamped by dealer is to be submitted to engineer incharge. Nos 15 ₹ 0.00

Removal of Old Wiring/BBT/Machine Connection removal

38 Removal of old Cables, Wires, Light Fitting, fan and DB, MCB DB and all other accessories required to meet the scope of work at site and at nearby location like passage, Gallery etc after tracing of live and non live wires of electrical, Lan and Telephone thereafter dressing of cable as directed by EIC. Job 1 ₹ 0.00

39 Removal of overhead Light fitting hanging from ceiling of height 15-20 feet approx and support structure, cable trays, supporting rod, electrical wiring and associated work etc for civil false ceiling work. The work includes associated work required clerance, removing, dressing and cutting of unused cables, shifting of scrap to scrap yard and civil patch work as per requirement. The work shall be done as per direction of engineer in charge. RMtrs 100 ₹ 0.00

40 Only labour charge for removal of overhead bus bar trunking with its support structure and shifting safely to the Store/Scrap Yard.The work also include the assosiated work required for removal of overhead bus duct system and removal of old under ground cable from panel to the overhead bus duct (Complete Job).The work shall be done as per direction of engineer incharge. RMtrs 60 ₹ 0.00

41 Only labour charge for removal of end termaination of machines connection from the both the end including removal of conduit from floor and and from plugin box. The work also include the related works required for removal of conduit from floor.The work shall be done as per direction of engineer incharge. Each 40 ₹ 0.00

RCC Iron floor Cutting

42 Only labour charges for Cutting of RCC Hard Iron Floor for laying of power cable of size 3.5 Core x 95 Sqmm and for conduting work for machine wiring. The work also include the plastering work after cabling and conduiting work to make surface smooth. All consumable materials required for the work shall be in the scope of supplier. The work shall be done as per direction of engineer in charge.The cutting sizes shall be as detailed below:-

i 100 CM x 10 CM x 10 CM (L X B X D) Mtrs 100 ₹ 0.00

ii 100 CM x 20 CM x 10 CM (L X B X D) Mtrs 50 ₹ 0.00

iii 100 CM x 30 CM x 10 CM (L X B X D) Mtrs 40 ₹ 0.00

LT Panel/Pedestal Distribution Box

43 Supply & installation of LT panel-01 as per attached BOM Incomer: 630A 4P 36kA MCCB,TMD Release,Standard extended rotary handle,Spreader Links (Set of 4) 4P , Multifunction Meter-Load Manager with RS485 port, Parameters: V, A, F, PF, W/VA, Wh /VAh, Runhrs, Onhrs & Interupts & Suppression Current (5 to 99 mA), Acc. Cl: 1.0, 3Ph, Operating voltage: 80 to 480V AC, Size: 96X96, Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC,Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Blue Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, 600/5A 15VA Resin Cast Acc. Cl: 1 Rectangular Type Current Transformer, Size: 80x40mm, 6A 1P 10kA C-Curve MCB, 32A Neutral Link, Channel Mounting, Color: Black/Grey. Outgoing with ampere meter & On indication : 400A 4P 36kA MCCB,TMD Release, Standard extended rotary handle, Spreader Links (Set of 4) 4P - 2 set, 250A 4P 25kA MCCB,TMD Release,Standard extended rotary handle, Spreader Links (Set of 4) 4P - 6 Set Note:- Any connection, disconnection of cables, cable gland & termination as per requirement, removal and shifting of panel shall be in the scope of contractor. Further Dimension of LT panels/padestal DB shall be suitable to existing available space. Nos 1 ₹ 0.00

44 Supply & installation of LT panel-02 as per attached BOM: Incomer: 1000A 4P 50kA Frame Size: 2 EDO ACB, Release: Microprocessor based Trip Unit (with current metering)- 01 Nos, Under Voltage Release (MN), 200/250V AC/DC 01 Nos , Multifunction Energy Meter with RS485, Parameters: Volts, Amps, PF,THD,F,W, Wh, VA, VAh, Var, Varh, Runhrs, Onhrs, Interupts, Preloaded Demand & Import/Export, Acc. Cl: 1- 01 Nos, Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC- 1 Nos, Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC-01 Nos, Blue Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC- 01 Nos, 6A 1P 10kA C-Curve MCB, Type:xC60- 03 Nos, 1000/5A Acc.Cl: 1 15VA Resin cast Rectangular Type Current Transformer, Size: 105x25mm-03 Nos, NEUTRAL LINK- 01 Nos Outgoing: 630A 4P 36kA MCCB with Microprocessor Based Trip Unit (built in LSIG protection), -02 Nos 400A 4P 36kA MCCB with Microprocessor Based Trip Unit (built in LSIG protection), -02 Nos 250A 4P 36kA MCCB with Microprocessor Based Trip Unit (built in LSIG protection), -04 Nos Spreader Links (Set of 4) 4P for 630A-04 Nos Spreader Links (Set of 4) 4P for 400A- 04 Nos Spreader Links (Set of 4) 4P for 160/250A- 08 Nos Standard extended rotary handle for 400/630A- 04 Nos Standard extended rotary handle for 100/160/250A- 04 Nos Note- Any connection, disconnection of cables, removal and shifting of panel shall be in the scope of contractor. Further Dimension of LT panels/padestal DB shall be suitable to existing available space.Any connection, disconnection of cables, cable gland & termination as per requirement, removal and shifting of panel shall be in the scope of contractor. Further Dimension of LT panels/padestal DB shall be suitable to existing available space.All MCCB of Incomer/Outgoing and shall be of double-break design with double arc chute per pole.and All ACB should be Pollution Degree 4 with RoHs compliant. Nos 2 ₹ 0.00

45 MCB Pedestal Panel as per attached BOM: Incomer: 250A 4P 36kA MCCB with Microprocessor Based Trip Unit (built in LSIG protection)- 01 Nos, Spreader Links (Set of 4) 4P for 160/250A-02 Nos, Standard extended rotary handle for 100/160/250A-01 Nos, Multifunction Energy Meter with RS485- 01 Nos, Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC-01 Nos, Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC-01 Nos, Blue Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC-01 Nos, 6A 1P 10kA C-Curve MCB, Type:xC60-03 Nos, 250/5A Acc.Cl: 1 15VA Resin Cast Rectangular Type Current Transformer, Size: 105x25mm-03 Nos, NEUTRAL LINK Outgoing: 63A 4P 10kA C-Curve MCB, Type:xC60- 06 Nos, 32-40A 4P 10kA C-Curve MCB, Type:xC60-04 Nos Note: All MCCB of Incomer/Outgoing and shall be of double-break design with double arc chute per pole. Nos 8 ₹ 0.00

Sub-Total ₹ 0.00

Discount on Sub-Total (if any)

Sub-Total after Discount ₹ 0.00

Net Total (Including GST) ₹ 0.00

Name of the Bidder:

Note: i. Please refer Chapter 6 of Technical Bid document for BOM (sl no. 43,44 & 45) and recommended make of equipments and to be used in the project, if it is not specifically mentioned in the price bid.