Creation of office chamber for Bamboo Mission officer on 4th floor at Udyog Bhawan Bamunimaidam Assam

Amount

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. In cement mortar 1:3

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department)

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) suspended ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 298mm c/c. Then 12.5mm thick square edge Fulltone/ Sundance/ Cratone/ ……. for Gypboard complete at all levels as specified and directed. (For light fittings, grill diffusers etc. cut out to be made with the frame of perimeter channel supported suitably and measured and paid separately as and where necessary). (Glass wool to be measured and paid separately).

Providing, fitting and fixing in position 62mm thick double skin partion with well seasoned Sal/ Bonsum/ Sundi / Hollock frame in size 75mm x 38mm and internal frame of 50mm x 38mm and fixing on both sides 8mm thick flat pressed melamine faced pre-laminated baggage board medium density fibre boards (MDF) bonded with phenol formaldehyde synthetic resin of approved shade as specified and directed at all levels. a) With Bajaj - exterior grade(one side decorative) (i) 8 mm tgick

Providing, fitting and fixing coloured anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars,joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.

Providing, fitting and fixing Coloured anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels.

Supplying, fitting and fixing drapery rods along with all accessories in doors, windows and other openings complete as specified and directed by the departmentb at all levels. Wood line

Supplying, fitting and fixing MAC blinds horizontal and vertical complete as specified and directed by the department at all levels. 50 mm vertical

Supplying and applying interior/exterior walls/ floors/ roofs one coat of Epoxy Primer of Jenson & Nicholson/ Nerolac brand as priming coat after cleaning and clearing the surfaces as specified and directed at all levels.

BUILT IN FURNITURE - Feature cabinet comprising of low height with carcass and shutters from best quality BWP ply (Austin or eqv.) finished with 4mm thk.veener outside with polish , and all internal surface shall be finished with 1mm thk balancing laminate. Incl. 400D X 32thk ledge top for the low height storage finished with 1mm thk laminate. Incl cost of all hardware- SS d-shaped cabinet handles 100mm long, Lock sets, self-closing hinges, spring loaded shutter latch inside, including all hardware and accessories, complete in melamine polish as per drawing and as per approval. 400mm deep

Providing, fabricating and fixing Full height ( 400 deep) cabinet consisting of 19mm thick BWP (Austin or eqv.), at top, bottom, sides, horizontal & vertical partition and shutters, of 12mm thick BWP ply (Austin or eqv.)and 6mm ply backing, finished with 1 mm thk. laminate finish on all exposed surface (Merino/Signature),with i/c stainless steel hinges, tower bolts, ball catchers, concealed locks etc.. complete .

P/F Low height storage unit 400x 750 ht.(Fortune or eqv. make)with carcass and shutters with 19mm thickBWP ply (Austinor eqv.) finished with 1mm thick laminate. counter top to be finished with 1mm thick laminate (Merino or eqv.), with counter top edge to be 25mm thk. Undercounter storage to have a adjustable shelf inside at 380mm level (internal clear) to be finished with laminate on both sides. Rate to be inclusive of all necessary hardware - SS cabinet handles 100mm long, locksets, self closing hinges, spring loaded shutter latch inside, finished as per dwg and as per approval.

BOOK RACK (1200 x 400 mm) deep with low ht cabinets and glass shelves in 1mm thk. Laminate (Merino/ Signature) finish

Providing and fitting FILE CABINET above for storage unit 400x 600 ht.(Fortune or eqv. make)with carcass and shutters with 19mm thickBWP ply (Austinor eqv.) finished with 1mm thick laminate. counter top to be finished with 1mm thick laminate (Merino or eqv.), with counter top edge to be 25mm thk. Undercounter storage to have a adjustable shelf inside at 380mm level (internal clear) to be finished with laminate on both sides. Rate to be inclusive of all necessary hardware - SS cabinet handles 100mm long, locksets, self closing hinges, spring loaded shutter latch inside, finished as per dwg and as per approval.

LOOSE FURNITURE P/F Officers Table with 35mm thk top (1800 x 900) in 4mm thk.veener (Archidply/decowood) finish with PU lamination . All shutters of 19thk w.p. blockboard with 4mm thk veener finish outside and balancing laminate inside. Rate to be inclusive of all necessary hardware - pop up boxes,SS cabinet handles 150mm long, locksets, self closing hinges, spring loaded shutter towerbolt inside, all cabinet hardware to be HETTICH or equivalent complete as per architects drawing and approval

P/F Staff table with 35mm thk top (2400 x 600) in 4mm thk.veener (Archidply/decowood) finish with PU lamination . All shutters of 19thk w.p. blockboard with 4mm thk veener finish outside and balancing laminate inside. Rate to be inclusive of all necessary hardware - pop up boxes,SS cabinet handles 150mm long, locksets, self closing hinges, spring loaded shutter towerbolt inside, all cabinet hardware to be HETTICH or equivalent complete as per architects drawing and approval.

CHAIRS Providing and fitting Chair for Officers, Monarch high back with rich leather finish,height adjustable and armrest, Godrej or equivalent as per approval

Providing and fitting Chair for visitors, SEDNA, Godrej or equivalent as per approval

ELECTRICAL- Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia rigid ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) including 6 amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete Medium point up to 6.00 metre. Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed ISI marked Steel conduit pipe (AKG or equivalent as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Medium point up to 6.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed ISI marked Steel conduit pipe 20 mm. dia. (AKG or equivalent as approved by the Deptt.) wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete. Medium point up to 6.00 metre. Length.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed ISI marked Steel conduit pipe wiring system. With 3 x 1.5 sq. mm. cable in 20 mm dia. rigid Steel conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts( Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in ISI marked Steel conduit pipe including earth continuity in surface/ recessed conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. cable in 20 mm. dia. rigid Steel conduit.

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. rigid Steel conduit.

Supplying with installation testing and commissioning of Hi -- wall 5 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with copper pipe and electrical connection cable, as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department. 2) 2 Ton Capacity 3. Daikin make

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make) 5.0 KVA Automatic Input 90-280 V Out put 200-240 V

Supplying with fitting and fixing of Angle iron framing made 50 mmx50 mmx5 mm size angle iron for accommodation of 1.00 Ton to 2.00 Ton Window/split type A.C. Machine

Supplying including fitting and fixing bus bar chamber ( HPL/ GECO / or equivalent make) with 4 strips bus bar of length 350/450/600/900 mm made of aluminium alloy or wrought aluminium suitable for 100 amp capacity complete with all accessories including connection etc. as required complete

Providing and fixing I.C.S.P and N link Main Switch of 240 Volt grade ( HPL/ GECO / ANCHOR or equivalent make) including drilling boards/iron frames and fixing with bolts and nuts and connection as approved by the Deptt.)complete as required 16 Amps Capacity S.P.N

Providing and fixing I.C.T.P and N distribution fuse boards with rewire able fuses 415 Volt grade,( HPL/ GECO / ANCHOR or equivalent make) 16/32/63 Amps per way including drilling boards/iron frames and fixing with bolts and nuts and connection as approved by the Deptt.)complete as required 8-way T.P.D.B 16 Amps/way

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 8 way SPN double door

Supplying including fitting fixing of following A.C. Wall fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Air Circulator wall fan 450 mm sweep Turbo force

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) Premium model 4-Star 1200 mm Sweep (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make)

Harekrishna Talukdar