Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.7 LAccepted-AOC | ₹35.7 L Quoted ₹36.5 L | L1 | Accepted-AOC Being L1 bidder |
| 2 | L2₹42.4 L+₹5.8 L (15.9%)Rejected-Finance | ₹42.4 L+₹5.8 L (15.9%) | L2 | Rejected-Finance Being other than L1 bidder |
| Sl No | Description | Qty | Unit | M/S PARSHOTAM KUMAR GUPTA L2 | Ankit Sagar L1 |
|---|---|---|---|---|---|
| 1.00 | Taking up CI/GI Water mains including fittings 80 mm bore with spigot/Socket/Flanged ends including burning out joints and recovering lead (if any), complete all as specified and directed. | 280 | Rm | 30 ₹8,400 Lowest | 100 ₹28,000 |
| 2.00 | All as per Item No 1.00 here-in-before but of size 100 mm bore. | 36 | Rm | 30 ₹1,080 Lowest | 110 ₹3,960 |
| 3.00 | All as per Item No 1.00 here-in-before but of size 150 mm bore. | 120 | Rm | 40 ₹4,800 Lowest | 150 ₹18,000 |
| 4.00 | All as per Item No 1.00 here-in-before but of size 200 mm bore. | 18 | Rm | 60 ₹1,080 Lowest | 300 ₹5,400 |
| 5.00 | Supply and laying of GI steel water tubing 80 mm bore medium grade laid in tranches/wall/floor/on ground and joined including necessary fittings such as bends, flanges elbow, tees sockets , etc including necessary saddles and clamps, complete all as specified and directed. | 280 | Rm | 980 ₹2,74,400 | 875 ₹2,45,000 Lowest |
| 6.00 | All as per Item No 5.00 here-in-before but of size 100 mm bore. | 60 | Rm | 1,450 ₹87,000 | 1,300 ₹78,000 Lowest |
| 7.00 | All as per Item No 5.00 here-in-before but of size 150 mm bore. | 684 | Rm | 2,300 ₹15,73,200 | 1,975 ₹13,50,900 Lowest |
| 8.00 | Supply, lay, jointing and testing ductile iron pipes with spigot & socket ends of size 200 mm bore, class K9, centrifugally cast conforming to IS 8329 with cement mortar lining inside surface of pipe including suitable rubber gasket joints (Tyton joint), in any length, laid to level or to falls in trenches/on grounds/on support/stand, complete all as specified and directed. | 18 | Rm | 4,000 ₹72,000 | 3,150 ₹56,700 Lowest |
| 9.00 | M&L for run lead joint, 200 mm bore CI pipe line, complete all as specified and directed. | 3 | Each | 1,000 ₹3,000 Lowest | 1,100 ₹3,300 |
| 10.00 | All as per Item No 9.00 here-in-before but of size 250 mm bore. | 3 | Each | 1,500 ₹4,500 | 1,400 ₹4,200 Lowest |
Tender Value
₹39.5 L
EMD Value
₹79,000
Closing Date
13 May 2026, 6:00 pmClosed
GE 862 EWS
GE 862 EWS PIN-914862 c/o 56 APO
SPL REPAIR TO FILTERATION PLANT EQPT RAPID SAND FILTER SEDIMENTATION TANK BACK WASH SYS CHLORINE DOZING SYS LT PANEL BD LT UG CABLES REPLACEMENT OF FILTER MED ALL TYPE OF PILELINES VALVES INCL ALL CONNECTED WKS AT TALLE PUMP HOUSE DETT-A GE 862 EWS
2026_MES_761372_1
GER-09/2026-27
Open Tender
Civil Works
Item Rate
120 days
GE 862 EWS
As per NIT
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹79,000
Yes
29 Jun 2026
22 Apr 2026
16 May 2026
22 Apr 2026
13 May 2026
7 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Taking up CI/GI Water mains including fittings 80 mm bore with spigot/Socket/Flanged ends including burning out joints and recovering lead (if any), complete all as specified and directed. | - | Rm | - | - |
| - | All as per Item No 1.00 here-in-before but of size 100 mm bore. | - | Rm | - | - |
| - | All as per Item No 1.00 here-in-before but of size 150 mm bore. | - | Rm | - | - |
| - | All as per Item No 1.00 here-in-before but of size 200 mm bore. | - | Rm | - | - |
| - | Supply and laying of GI steel water tubing 80 mm bore medium grade laid in tranches/wall/floor/on ground and joined including necessary fittings such as bends, flanges elbow, tees sockets , etc including necessary saddles and clamps, complete all as specified and directed. | - | Rm | - | - |
| - | All as per Item No 5.00 here-in-before but of size 100 mm bore. | - | Rm | - | - |
| - | All as per Item No 5.00 here-in-before but of size 150 mm bore. | - | Rm | - | - |
| - | Supply, lay, jointing and testing ductile iron pipes with spigot & socket ends of size 200 mm bore, class K7, centrifugally cast conforming to IS 8329 with cement mortar lining inside surface of pipe including suitable rubber gasket joints (Tyton joint), in any length, laid to level or to falls in trenches/on grounds/on support/stand, complete all as specified and directed. | - | Rm | - | - |
| - | M&L for run lead joint, 200 mm bore CI pipe line, complete all as specified and directed. | - | Each | - | - |
| - | All as per Item No 9.00 here-in-before but of size 250 mm bore. | - | Each | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
BOQ_852853.xls
BOQ • 0.37 MB
TD.pdf
Tender Documents • 0.87 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .