Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical found in order |
| 2 | Accepted-Technical | Accepted-Technical found in order |
| 3 | Accepted-Technical | Accepted-Technical found in order |
| 4 | Accepted-Technical | Accepted-Technical found in order |
Tender Value
Refer Docs
EMD Value
₹12,000
Closing Date
27 Jan 2026, 4:00 pmClosed
The Assistant Engineer (Civil) SHQ BSF Coochbehar
The Assistant Engineer (Civil) SHQ BSF Coochbehar
WATER PROOFING OF JAWAN BARRACK NO 01 OF AZADNAGAR CAMPUS UNDER SHQ BSF COOCHBEHAR
2026_BSF_893713_1
41/ENGG/E-NIT(Civil)/2025-26
Open Tender
Civil Works
Works
60 days
SHQ HQ AZADNAGAR CAMPUS CBR
please refer tender document
9 documents required · 9 mandatory
₹0
₹12,000
29 Jan 2026
13 Jan 2026
28 Jan 2026
13 Jan 2026
27 Jan 2026
13 Jan 2026
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
Add @ 10.28% for Cost Index Rs.
Modified Estimated Cost after using correction factor on DSR 2023 on account of GST @ .973
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.76 MB
GCC20CON_Misc_26_MaintenanceWorks.pdf
Additional Documents • 5.41 MB
gccmodifcation.pdf
Additional Documents • 4.91 MB
GCC-2014-Correction-Slip-CON-302.pdf
Additional Documents • 0.26 MB
BOQ_939370.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .