Provn of hard standing for B Veh and Special repair to Bldg No P23 including certain Revenue and Minor works at JNM Axis under GE Gangtok

Amount

SCHEDULE 'A' PART-1(B/R WORKS)

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil etc, complete all as directed by the Engr-in-Charge.

Excavation in trenches in soft/loose soil not exc.1.5 metre wide and not exc 1.5 metre in depth and getting out complete all as specified and as directed by the Engr-in-Charge.

Removing excavated material to a distance n. Exceeding 50m and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as directed by the Engr-in-Charge.

Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms in depth in soft/loose soils complete all as specified and as directed by the Engr-in-Charge.

Materials and labour for 150mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub-base of floor etc. complete all as specified and as directed by the Engr-in-Charge.

Materials and labour for 100mm thick PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in sub-base of floor etc. complete all as specified and as directed by the Engr-in-Charge.

Material and labour for PCC (1:3:6) type B2 (using 40mm graded stone aggregate as in surface channels and drains including forming fair finished to drain channel complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including form,moulds, mitred/stopped ends complete all as specified and as directed.

Material & labour for precast PCC 1:3:6 type C1 (by using 20mm graded stone aggregate) block masonry with solid blocks,exc 10 cm in width and setting in CM1:6 complete all as specifeid as directed by the Engr-in-Charge.

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified.

Material and labour for hardcore of gauge n.exc.63mm (using broken stone or boulders) deposited, spread and levelled in layers not exc.15cm thick, watered and rolled/rammed to a true surface complete all as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 - 2006 of 80mm thickness, M-40 Grade with grey cement and pigment over & including 20mm thick screed bed in CM (1:6) all as specified and as directed.

Material & labour for Lacquer coated coloured chequered cement concrete tiles 300mmx 300mm x 25mm thick set, jointed and pointed in neat slurry in floors with grey cement and pigments over and incl 15mm thick screed bed or bedding layer in CM (1:4)

Material and labour for walling of random rubble, brought upto uncourse, well bonded bedded & solidely hearted, built in CM (1:6) including laying 75mm bore PVC pipe in weep holes complete all as specified and as directed.

Supply and fix PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints fixed to wall complete all as specified and as directed by the Engr-in-Charge. Make : Prince or equivalent approved.

M&L for PCC 1:4:8 , type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M & L for formwork to sides and soffits for rough finished of floors or roof beams, lintels cantilevers, shelves including supports etc rough finish complete all as specified and as directed.

M&L for RCC (Nominal mix) 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundations, including rafts,footings, foundation beam; plinth beams; bases for columns, etc; basement slabs,under-reamed piles and mass concrete complete all as specified and as directed.

M & L for RCC (nominal mix) 1:2:4 type B1, (using 20mm graded stone aggregate) as in beams, cantilevers, lintel over 1.5 m span complete all as specified and as directed.

M&L for mild steel TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for labour for Mild steel TMT bars 5mm dia and over upto including 10mm dia as in stirrups, spacers and binders cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for sand filling under floors including watering and consolidation complete all as specified and directed by the Engr-in-Charge.

Materials and labour for 100mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified and as directed by the Engr-in-Charge.

Material and labour for 12mm dia mild steel screw bolts (machine made) with hexaginal or square heads at one end and screwed the other, eacxh screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long complete all as specified and directed by the Engr-in-Charge.

S&F for mild steel tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS- 1161-1998 grade St-240 including one shop coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabrication and fixing complete all as specified and as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets (Trapezoidal Profile) of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and as directed by the Engr-in-Charge.

Material & labor for non skid coloured ceramic tiles of 7 to 8mm thick ( Square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc conforming to IS-13712, grade B-II-(a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed/bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed.

Materials & labour for coloured glazed ceramic tiles of size (300x200mm/350x250mm/450x350mm) of 7mm thick, as in vertical surfaces such as skirting/dado/riser to steps etc conforming to IS-13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed/backing layer of 15mm thick in cement mortar (1:4) complete all as specified and as directed.

Material & labour for rendering 20 mm thick in cement mortar (1:4) in two layer of 10 mm thick each, with using Water Proofing Compound shall be mixed with cement mortar in finishing outer layer only, as per manufacturer instruction, on fair face of brick work or concrete surfaces, finished fair and even with out using extra cement complete all as specified and as directed. [Note : WPC shall be measured and paid separately as supply only].

Supply only integral Water Proofing Compound, conforming to IS-2465-2003 of approved make complete all as specified and as directed.

S&F of factory made solid PVC door frame of size 50mm x47mm made out of 5mm thick single side prelaminated PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelaminated sheet as per specification and drawing given on Sl page No.160 of MES schedule Part-II (2010) complete all as specified and as directed.

S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, solid steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of both side prelam PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES schedule part-II (2010), Page No. 156 complete all as specified and as directed.

M&L for aluminium powder coated louvered ventilators of heavy duty Jindal section frame & shutter of appropriate sizes with aluminium members for holding glass strips including necessary locking arrangements etc complete all as shown in drawings & as specified and directed by the Engr-in-Charge. (Make : Jindal or equivalent approved).

S&F 4mm thick frosted glass strips complete fixed to louvered type aluminium ventilators all as shown on drawings specified and as directed.

S&F 100mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified.

Supply and fix 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by the Engr-in-Charge.

S&F 150 mm long aluminium anodised handles, cast type, complete all as specified and directed.

S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

Supply and fixing galvanised steel water tubing 15mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors all as directed by the Engr-in-Charge.

Supply and fix in repair vitreous china, white colour flat back, wash hand basin of size 55 x 40 x 79cm fixed with brackets, including providing 32 mm bore PVC waste pipe, 32 mm bore CP waste coupling and making all necessary connectrions complete as directed. Make : Cera Model CORNET Cat No 1008 or equivalent approved .

Supply and fixed 15mm bore pillar taps, fancy type with long neck with aerator cast copper alloy with capstan head, chromium plated, screwed down, high pressure with long screwed shanks, fly-nuts, with screwed for GI pipe complete all as specified and as directed.Make : JAQUAR Code CON-CHR-021 KN or equivalent approved.

S&F vitreous china bowl urinal flat back size 355mm x 535 mm white (minimum) with gratings and union for discahrge pipe (excluding flushing cistern,flush pipe and waste pipes) etc all as directed and specified by Engr-in-Charge. (Make:Jaquar Cat No. URS-WHT-13261 or equivalent approved)

Supply & fix angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as directed by the Engr-in-Charge.Make: Essco Cat Part No DLX-ESS 526 or equivalent approved.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450mm complete all as directed by the Engr-in-Charge. Make : prayag Cat No. 323 or equivalent approved.

Supply and fix in repairs CP tubular towel rail 600 mm long with and including chromium plated brass screws complete all as specified & as directed. Make: Jaquar 'Continental Series' Cat No 1111 or equivalent of approved.

Supply and fix PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed by the Engr-in-Charge. Make : Prince or equivalent approved.

Supply and fix 75mm bore PVC (SWR) bends any radius complete all as specifeid and as directed by the Engr-in-Charge. Make : Prince or equivalent approved.

Supply and fix 75 mm bore PVC(SWR) equal or unequal junction single (Single T) complete all as specified and directed by the Engr-in-Charge. Make : Prince or equivalent approved.

Supply and fix 75 mm bore PVC (SWR) plain floor trap with CP grating complete all as specified and directed by the Engr-in-Charge. Make : Prince or equivalent approved.

M&L for 75 mm bore PVC (1:3:6) , type C-2 (using 40 mm graded stone aggregate) as in plinth protection; path / hardstanding etc laid in bays/ panels not exc 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic fillinf (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified and as directed.

S&F green Granite (of any type) stones 20mm thick machine cut as in partition of urinals and cutting of grooves on wall and fix in CM 1:3 complete all as specified and as directed.

M&L for preparation of newly plasterd surfaces of walls and applying three coat of white wash on new surfaces of walls all as specified and directed.

M&L for Preparation of newly plasterd surfaces of walls and applying two coats of cement based paint over a coat of suitable primer on new surfaces of walls all as specified and directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.

Roughening surfaces of old concrete floor by packing, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M&L for brushing neat cement slurry with 3kg of cement per Sqm complete all as specified.

M&L for Precast cement concrete hollow block masonry exc. 10cm in width with PCC1:3:6 type C1 ( using 16mm graded aggregate) as per IS-383 complete all as specified and as directed.

Materials and labour for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified and as directed by the Engr-in-Charge.

Supply and fix Brass chromium plated shower rose 120mm size complete all as specified and directed by Engr-in-Charge.Make-Jaquar Cat No OHS-1789 or equivalent approved.

S & F in repair CP Soap dish any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. ( Make : JAQUAR Code : ACN-1131N or equivalent approved.)

S&F 75mm long butt hinges medium weight cold rolled MS all as specified and as directed.

Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by the Engr-in-Charge.

S&F 125 mm long aluminium anodised handles,cast type, complete all as specified and directed.

M&L for providing precast cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate louvered and jallies 40 mm thick (measured solid) including all mouldings but excluding frame set in cement mortar 1:4 complete all as specified and directed by the Engr-in-Charge.

Supply and fix 110 mm bore PVC (SWR) bends any radius complete all as specified and directed by the Engr-in-Charge. Make : Prince or equivalent approved. Make-Prince or equivalent approved.

M&L for Non- skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular )area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, as in floors etc conforming to IS-13712, grade- B-II(a) etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 20mm thick screed bed in cement mortar (1:6) for laying floor finishes.

Excavation in post holes (or similar holes) in soft/loose soil each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm and removing surplus soil to a distance n.exc 50 mtrs complete all as specified and as directed by the Engr-in-Charge.

Supply and fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts as in roofs walls etc, (Class VIII) all as specified and as directed.

S&F mild steel flat iron including all necessary drilling bolting or rivetting etc similar small work conforming to Fe-410 or FE-310-0 all as directed and specified by Engr-in-Charge.

M & L for Machine cut kota stone slab flooring of size 450mmx450mmx 20-25mm thick over and including cement screed base 15mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

Taking down chowkats with shutter of any decsrption (without taking down shutter from the frame) n exc. 1.5 Sqm each and removing from site complete all as directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as speicifed and as directed.

M&L for 30mm thick 2nd class hard wood well seasoned glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mittred beads for securing glass, etc, size of members of shutter as specified in SSR Part I, Section8, Clause 8.24 (a) complete all as directed.

S&F 100mm long aluminium anodised handles, cast type, complete all as specified and directed.

Supply and fix 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by the Engr-in-Charge.

S&F in repairs Galvanised mild steel wire cloth,0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified all as directed.

Taking down and Re-fixing of shutter of any description exc 1 sqm and n. exc 2 sqm in the same opening complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips and removal from the site complete all as directed by the Engr-in-Charge.

S&F 3mm thick sheet glass panes, ordinary quality and glazing with oil putty including steel pin in square n. Exc 0.5sqm in each pane fixed to steel frame complete all as specified & as directed.

S&F in repair 25mm dia aluminium powder coated fancy curtain rod plain or colour as approved with teak wood finish brackets and knobs complete all as specified and directed.

Dismantling old PGI/CGI sheeting any guage, thickness including Nainital. Sikkim or similar pattern roof/facia including ridge etc and keeping serviceable sheets in safe custody for re-use complete all as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves,etc fixed with self tapping screws complete all as specified and as directed by the Engr-in-Charge.

Dismantling timber scantling 40 sqcm and over in section any position as in unframed work complete all as directed.

M&L for 2nd class hard wood timber scantling fixed clean swan complete all as specified & as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as directed.

Supply & fix mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats etc conforming to Fe-410-W (Gde-E- 250) complete all as specified and as directed.

S&F mild steel bands, straps, supports or stays for rainwater, ventiliating pipes incl bolts, hooks for large gates, pintle hinges, large hasp and staples, chains, handmade sliding bolts, clamps, hold fast, and wall tie, hook for hanging fans, plain angle cleats for securing purlins trusses or rafters, knee piece inserts, two way and three way straps, plate washers and all similar small articles conforming to FE-290 Gde and E-165 all as directed and specified by Engr-in-Charge.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F PVC (SWR) half round 150mm dia with rounded edges incl all accessories like bend T etc for eaves gutter complete all as specified and directed . (Make:PRINCE or equivalent approved)

Supply & fix in repairs 150mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with necessary clamps bolts etc. Complete all as specified and as directed. (Make:PRINCE or equivalent approved)

Supply and fix 150mm bore PVC (SWR) bends any radius complete as specified and directed by the Engr-in-Charge. (Make:PRINCE or equivalent approved)

Demolition to cement in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition to cement concrete of any description and in any position not otherwise specifically provided for (unreinforced) complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description exc 10 cm in width and girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & as directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrappers, any number of coats any width or girth etc and applying two coats of oil bound distemper over a coat of primer over a coat of birla super fine putty or altek putty finish as required and as per manufacturer instruction complete all as specified and as directed.

Material and labour for complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrappers, any number of coats any width or girth etc and applying two coats of cement base paint complete all as specified and as directed.

SCHEDULE 'A' PART-II (E/M PORTION)

M&L for point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC (FRLS) insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with multistranded copper conductor in including PVC heavy grade rigid non metallic 25mm PVC casing caping (double Lock) including PVC polycarbonate/PVC/recatangular block/box of suitable size fixed by means of brass machine screw and cap washer including size 1.5 sqmm (nomnal cross sectionl area PVC (FRLS) insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DBs or common earth dolly complete all as specified and directed for the following .Make of cable-Havells/Finolex/plaza, Make of casing caping- Prestoplast/Plaza/Modi.

(a) One light point/fan point controlled by one switch.

S&F in repairs LED tube light fittings IP 20,Class I, LED light fitting 1 x 18 W (4 FT), CRI >=80, CT >=5700K, wall/ surface mounted, integrated type, constructed of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt,power factor >/0.90, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangements complete including 01 No 18 W (4 FT) LED Batten with all accessories internally prewired and including connecting cable of suitable size all as specified and as directed. (Make : Havells Cat No LUMLINEPLUSBS18WLED865SPCSS or equivalent approved

Supply and fixing in repairs of lamp holder,angular/straight insulated body with back plate PVC/Polycarbonate type with cord grip cap suitable for batten fittings white/ivory finish and fixing of 20/18 watt CFL. Make : Anchor Product Code No. 39527 or equivalent approved.

S&f in repairs switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-Charge. Make : Anchor product Code No 50053 or equivalent approved.

S&F in repairs ceiling rose,PVC/ polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and directed. Make : Anchor Product Code No 39040 or equivalent approved.

S&F in repairs MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge. (Make : L&T cat No BB10060C to BB10320C or equivalent/approved)

S&F MCB single pole & neutral 40 to 63 amps, 240 volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed. (Make : L&T Cat No. BB20400C to BB20630C or equivalent approved)

M&L in repairs for single door 4 way,DB for MCB SPN as incomer and SP MCB as outgoing with IP 43 and IK 09 protection complete with 200 Amps rated bus bar fixing in wall and making good disturbed surfaces and connection. Note:- MCB are not included in the item rate and considered separately.Make:- Legrand, model-EKINOXE, Cat No- 607711 or equivalent approved.

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected with galvanised iron/steel earth wire of 4mm dia by means of bolts, nuts, check nuts and washers made outof galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I (2009) and earth wire protected by galvanized pipe light grade 15mm bore and connected to VTPN DB/SPN DB including neccessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2;4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS hook 6mm dia MS bars etc complete all as specified and as directed including testing on completion.

Supply, fixing and hoisting in position Rotational moulded polyethylene water storage tank,500 litres capacity, ISI marked three layer construction (cynlindrical vertical with closed top), hoisted & fixed with 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & having weight not less than 455 gms in position complete all as specified and as directed.Make-Sintex ISI marked or equivalent approved.

Material and labour for GI pipe galvanized medium grade with all fittings like socket, elbow, bends,unoin etc ends laid in trenches/floor or fixed with wall of size 25mm bore of pipes.

S&F Gun metal gate valve 25 mm ISI marked with iron wheel head scewed both ends for iron piped all as specified and as directed.

Supply and fix 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire,one twin core Sqmm 2 core cable flat or circular complete all as specified and as directed.

M/S ANIL KUMAR THAKUR

RAAJ BANGAR

DHARMINDER SINGH

KAMLESH ENTERPRISE

M/S S. S CHETTRI AND SONS

M/S MANOJ VERMA

KARMA TSETEN BHUTIA

BIJAY MITTAL