Construction of New Panchayat Union Office building in Thimiri Block 2021-22 at Ranipet District

Amount

Thimiri Block

Construction of New Panchayat Union Office building in Thimiri Block 2021-22 at Ranipet District

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Supplying and filling with M.sand in layers of not more than 15cm thick for foundation

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete.

Supplying and erecting water tight steel shuttering to centering including necessary supports for plane surface in Foundation and Basement for RCC Columns, Footings, Plinth beams, bed blocks, staircase steps etc., using suitable mild steel sheets etc., complete.

Plinth beam

Brick work using second class Country bricks of size 8 3/4" x 4 1/4" x 2 3/4" in Cement Mortar 1:5 (one cement and Five sand) including curing, neat finishing, etc, complete complying with standard specification.

Foundation and Basement

Ground Floor

First Floor

Second Floor

Supplying and erecting, centering for sides and soffits including supports and strutting up to 3.29m height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheet etc., complete.Plane surfaces such as RCC floor slab, roof slab, rectangular square Tee or Ell beam, lintels, bed blocks staircase waist slab, landing slab, landing beams, etc.

Plane surface such as RCC square or rectangular columns, top and bottom slab of sunshade, boxing sill slabs etc.,

Reinforced Cement Concrete of mix 1:11/2:3 (One cement, one and half sand and three aggregate) with water proofing compound of 2% by weight of cement used and using 20mm size machine crushed granite stone jelly etc., complete.

Column footing - Foundation basement

In Ground floor

In First floor

In Second floor

Supplying, fabricating and placing in position M.S. or R.T.S. reinforcement grill for RCC works as per the design given including cost of steel and binding wire etc., complete complying with standard specification. (The contractor will have to make his own arrangements for the supply of M.S. plain rods / RTS rods and binding wire)

Weathering Course concrete with broken brick jelly of 20mm gauge in pure slaked lime to be laid in a single layer (No sand to be added) over roof slab the proportion of brick jelly to lime being 32 to 12.5cft by volume well beaten with wooden beaters etc., complete.

Finishing the top of roof with one course of New Machine Pressed tiles of approved quality of size 23x23x2cm laid in cement mortar base layer 1:3 (One cement and Three sand) 12mm thick mixed with water proofing compound etc., complete.

Brick partition wall of 11cm thick using country bricks of size 8 3/4 x 4 1/4 x 2 3/4" in cement mortar 1:3 (One cement and three sand) using hoop iron reinforcement if found necessary including finishing and curing etc., complete.

Ground floor (11cm thick)

In Ground floor (11cm thick)

Supplying and Filling the foundation and basement with excavated earth in layers of not more than 15cm thick well rammed, watered and consolidated as directed by the deptl. officers. Complete complying with standard specifications.

Supplying and Filling the foundation and basement with excavated earth in layers of not more than 15cm thick well rammed, watered and consolidated as directed by the deptl. officers. Complete complying with standard specifications.

Supplying and Filling the foundation basement with conveyed earth in layers of not more than 15cm thick well rammed, watered and consolidated as directed by the deptl. officers. Complete complying with standard specifications.

Supplying and filling in foundation and basement with filling M. sand in layers of not more than 15cm thick including well rammed, watered and with consolidated as directed by the departmental officers complete complying with standard specifications.

Cement concrete 1:4:8 (One cement four sand and Eight aggregate) using 40mm gauge hard broken granite stone including all incidental charges, dewatering if found necessary and laid in layers of not more than 15cm thick consolidating, finishing and curing etc., complete.

Paving the floor with best approved quality fine polished Vertified tiles of size 610x610x20mm machine cut edges laid over cement mortar 1:3 (One cement and three sand) 20mm thick etc., complete.

Supplying and fixing of Anti-Skid tiles for approved quality including cost and labour fixing charges etc.,complete.

Supplying and fixing of Step tiles Using Cement Mortar 1:3 ( One cement And Three Sand ) with 20 mm Thick for flooring including cost and labour fixing charges etc.,complete.

Dadooing with white glazed tiles Using Cement Mortar 1:3 ( One cement And Three Sand ) with 20 mm Thick for approved quality of tiles including cost and labour charges etc.,complete

Supplying and fixing of MS Box type door frame etc.,complete.

Supplying and fixing of MDF shutter for approved quality including cost and all accessories etc.,complete. Double Leaf

Supplying and fixing of Aluminium Door including cost and all accessories etc.,compelte.

Supplying and fixing of Steel Glazed Ventilator for approved quality including cost and all accessories etc.,complete.

Supplying and fixing of Aluminium Sliding Window with grill for approved quality including cost and all accessories etc.,complete.

Four track

Three track

Supply and fixing of MS grill for windows with 35 x 6 mm plate using 12 mm square rod including cost and conveyance and all other labour charges(53.60+29.10) PWD SOR

Supplying and fixing of 2/3 Grill and 1/3 paneled door including cost of all materials and labour fixing charges etc.,complete.

Plastering with cement mortar 1;5, using 12mm thick in all floors etc.,complete.

Special ceiling plastering with cement mortar 1;3. using 10mm thick in all floors etc.,complete.

Painting with Oilbound Distember paint 2 coats over one coat of priming cost for approved quality including cost and labour charges etc.,complete.

Painting with Plastic Emulsion paint 2 coats over one coat of priming cost for approved quality including cost and labour charges etc.,complete.

Painting two coats to new Irion works including cost and labour charges etc.,complete.

Painting two coats to new Wood works for approved quality of paint including cost and labour charges etc.,complete.

Solid PVC Door shutter with frame using 19 gauge 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Tactile Paver type of New tek BT Yellow colour Ceramic tiles of size 305x305x15mm for vision Impairment person Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the departmental officers. The rate inclusive of cost of materials labour etc complete

Manufacturing,supplying and fixing of stainless steel hand rails for staircase using 50mm dia 304L grade stainless steel pipe of 1.6mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1mm thick as vertical at 900mm centre with 2 Nos of 25mm dia intermediate horizontal stainless steel pipe of 1.6mm thick in between.The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete.The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing,conveyance, electrical charges,ect.complete.

Portico Portion

Earth work excavation for foundation in all soils and sub soils and to full depth as may be directed except hard rock requiring blasting but inclusive of shoring strutting and baling water wherever necessary refilling the sides of foundation with excavate

Supplying and filling with M sand in layers of not more than 15cm thick for foundation

Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete.

Reinforced Cement Concrete of mix 1:11/2:3 (One cement, one and half sand and three aggregate) with water proofing compound of 2% by weight of cement used and using 20mm size machine crushed granite stone jelly etc., complete.

upto basement level

Above Basement level upto 3.30m height

First floor

Supplying and errecting centering for sides and soffits of all RCC works including removal of form work after the specified period for enterance portion column

For Circular Columns

upto basement level

basement level Upto 3.30 m height

From 3.30m height up to5.40m height

For Plane surfaces such as RCC roof slab, Rectanguler, Squar, T-beam etc., complete

Supplying, Fabricating and placing in position of RTS rods for all RCC works

Finishing to exposed surfaces of RCC items with cement mortar 1:3, 10mm thick

Painting with Exterior emulsion paint 2 coats over one coat of poiming cost for approved quality including cost and labour charges etc.,complete.

Paver Block Arrangement

Earth work excavation for pavement & drain in all soils and sub soils and to full depth as may be directed except rock requiring blasting but inclusive of shoring strutting and baling out water wherever necessary etc., complete.

Cement concrete 1:4:8 (One cement four sand and eight aggregate) using 40mm gauge hard broken granite stone including all incidental charges, dewatering if found necessary etc., complete.

Brick work in C.M. 1:5 (One cement and five sand) mixing with water proofing compound 2% by weight of cement using second class country bricks of size 8 3/4 x 4 1/4 x 2" etc., complete.

Plastering with cement mortar 1:5 (One cement and five sand) 12 mm thick in all floors including cost of scafolding, finishing, curing etc.

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .

Flooring with Paver block with Interlocking precast cc blocks of 60 mm thickness as per standard specification

Sanitary Arrangements

Earth work open excavation for septic tank dispersion Trench pipe line, Swear line etc., in all soils except in rock requiring blasting and depositing the excavated earth in places shown by the departmental officers with an initial lead of 10metres and initial lift of 2metres etc., complete complying with standard specification.

Supplying and filling foundation and basement with filling M sand in layers not more than 15cm. Thick well ramed watered and compacted complete complying with standard specification

Cement Concrete 1:4:8 (One Cement, four sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in cement mortar 1:5 (one cement and five sand) using IInd class kiln burnt second class brick of size 8 3/4 ” x 4 1/4 ” x 2 ¾” for the following items including curing etc. complete complying with standard specification.

Supplying and erecting steel centering for Plane surfaces RC slab, beam, lintel bed block landing slab waist slab etc.,

Cement Concrete 1:1.5:3 (One Cement, two sand and four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill, fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrator, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One cement and three sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Plain Cement Concrete 1:2:4 (One Cement, four sand and eight hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Supplying, fabricating and placing in position M.S. or R.T.S. reinforcement grill for RCC works as per the design given including cost of steel and binding wire etc., complete complying with standard specification. (The contractor will have to make his own arrangements for the supply of M.S. plain rods / RTS rods and binding wire)

Plastering wall with Cement Mortar 1:3 (One cement and Three sand), 12 mm thick using WPC at 2 % weight of cement used etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing in position best approved quality and make white glazed earthen ware oriya type Indian water closet of size 580 mm with P or S trap embedding the closest and trap to shape in position with brick jelly lime concrete 1:2:5 (one lime two sand and five brick jelly) using 40 mm broken brick jelly and finishing the top to required slope and including giving connections to the PVC soil stacks using 0.60 m long PVC Pipe 110 mm dia. 6 kg/sqcm by dismantling masonry, RCC roof or floor slaps and making good, the disturbed portion to original condition without and leakage etc. complete as directed by the departmental officers and complying with standard specifications (The water closet P or S trap are to be got approved by the Executive Engineer before use on works)

Supplying and fixing in position by means of 75mm long and 6.5mm dia counter sunk bolts and nuts embedded in the floor with rubber or fibre washers. Best quality and approved make white glazed earthern ware European water closet with P or S trap with seat and double flapped rigid PVC seat cover with chromium plated hinges, and giving necessary connection to PVC socket using 110 mm dia PVC pipe 6 kg/sqcm.of 0.60m length including supplying and fixing PVC tank of 10.00 litre capacity with all internal fittings with a pair of cast iron brackets and with all fittings such as 15mm dia nylon connection, 15mm dia GM wheel value, 15mm dia brass nipple including, labour charges for fixing the flushing tank on wall with teak wood plugs and screws, giving water supply connection, painting CI brackets with two coats of best approved quality synthetic enamel paint over a coat of red oxide primer, redoing the disturbed masonry and flooring to original condition, etc. complete complying with standard specification.

Supplying and fixing in position best Indian make wash hand basin of size 550mm X 400mm and approved brand and quality with a pair of C.I. Brackets fixed to wall with necessary teakwood plugs and brass screws one No. of 15mm C.P. Pillar tap, 32mm C.P. Waste coupling, rubber plug and chain, 32mm G. I. Union, 32mmG. I. Waste pipe, 15mm dia G. M. Wheel valve 15mm brass nipple and nylon connection including cost of white lead TW Plugs clamps, rubber washer, etc., complete. (The wash hand basin should be got approved from the Executive Engineer before use on works).

with Pedestal

without Pedestal

Supplying and fixing in position best quality chromium plated towel rail of 60cm length and 20mm dia with C.P brackets of same material including fixing with necessary T.W Plugs, Brass C.P. screws and dismantling masonry etc., Complete complying with standard specification.

Supplying and fixing Brass CP soap tray including fixing with necessary teak wood plugs, CP screws and dismantling masonry and redoing the sane to the original condition.

Supplying and fixing in position PVC Pipe of 6 kg per sq.cm. best approved quality and make conforming to ISS of the following diameter and providing leak proof joints etc., including fixing to the wall with necessary teakwood plugs, brass, screws, mild steel clamps, etc., and giving connections to the sanitary fitting including dismantling brick masonry RCC floor or roof slab etc., wherever necessary and redoing the disturbed portion to the original condition complete complying with standard specification (The PVC pipe should be got approved from the Executive Engineer before use on works).

110mm dia PVC Pipe AGL

75mm dia PVC Pipe

160mm dia PVC Pipe BGL

Supplying and fixing in position of the following PVC specials best approved quality confirming to ISS and providing leak proof joints with PVC adhesive etc, including fixing to walls with necessary teak wood plugs screws etc. and giving connections to the PVC pipe dismantling the brick masonry RCC floor or roof slab and redoing the disturbed portion to original conditions etc. complete complying with standard specifications. (The PVC specials should be got approved from the Executive Engineer before use on works).

110mm dia PVC Door Bend

110mm dia PVC Plain bend

110mm dia PVC Tee

75mm dia PVC Door Bend

75mm dia PVC Plain bend

Supplying and fixing in position best approved quality PVC Nahini trap of 110 mm x 75 mm size with stainless steel gratings of approved quality fixed over a bed of lime concrete.1:2:5 (one lime two sand and five brick jelly) using 40mm broken brick jelly including dismantling the flooring concrete / Brick masonry wherever necessary and redoing the disturbed portion to the original condition and giving in connection to the PVC soil (stacks) pipe as directed etc., complete complying with standard specifications. (The PVC Nahini trap should be got approved from the Executive Engineer before use on works).

Supplying and fixing in position P.V.C. ventilating shaft of 110mm dia with working pressure of 4kg/cm2 and 3m height with P.V.C. cylindrical cowl and fixing in position as directed etc., complete. (The P.V.C.pipe and cowl should be got approved from the Executive Engineer before use on work).

Collection and supply of hard broken granite stone metal of the following size ISS Metal for dispersion trench including stacking to the departmental gauge and placing around the stoneware pipe to the required thickness as directed by the departmental officers etc., complete complying with standard specification 40 mm Metal

Supplying and fixing in position of Indian make White Glazed earthern ware lipped mouth flat back urinal of best approved quality with G.I.Pipe connection of suitable length,32mm bell mouthed P.V.C. connection,15mm dia G.M. Wheel valve, fixing the urinal to the wall in position with necessary T.W. Plugs,Clamps, Screws, Shellac etc., including dismantling masonry if necessary and redoing the same to original condition, fixing the 15mm dia G.I. Pipe connection and wheel valve, paintinf the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. (The Urinal should be got approved by the Executive Enginer before use on work)

Supplying and fixing of Squatting Urinal for approved quality including cost and fixing charges etc.,complete.

Supplying and fixing of Mirror for approved quality including cost and labour charges etc.,complete.

WATER SUPPLY ARRANGEMENTS

Supplying and fixing of PVC water storage tank of best approved quality and make of super thick with lid of capacity of 2000 litres with accessories including giving necessary connection etc., complete as directed by the departmental officer. (The PVC water storage tank should be got approved by the Engineer before use on work)(TWAD- Pa no:173)

Supplying, laying and jointing B class G.I. Pipes of the following dia of approved quality and best variety above ground level including fixing of G.I Specials but excluding cost of such specials and cutting and threading of pipes (The G.I specials will be measured and paid for separately).but including fixing to the wall with necessary clamps and screws, Teak wood plugs making holes in the wall (or) drilling holes in the roof and making good of the disturbed portion to the original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. etc., complete complying with standard specification.

32mm dia GI Pipe (AGL)

25mm Dia GI Pipe

20mm dia GI Pipe

Supplying, laying and jointing B class G.I pipes of the following dia of approved quality and best variety below Ground level and laid properly to alignment including fixing the required G.I. Specials. but excluding cost of such specials, cutting and threading charges. The pipe is to be covered with tar dipped gunny tapes etc., complete. (The G.I specials will be measured and paid for separately). The rate should be exclusive of necessary earthwork excavation of size 40cm width and to an average depth of 50cm and refilling (The G.I.Pipes should be got approved by the Executive Engineer before use on works)(TWAD- Pa no:38)

25mm dia GI Pipe (BGL)

20mm dia GI Pipe

Supplying and fixing in position G.I. Union of heavy type of approved quality and good variety of various sizes including necessary cutting and threading of G.I. pipes for jointing the union for both internal and external water supply arrangements(TWAD- Pa no:42)

32mm dia GI Union In distribution

25mm dia GI Union In distribution

20mm dia GI Union In distribution

Supplying and fixing in position the following galvanized Iron specials of best approved quality and heavy type and good variety excluding fixing charges, but including cost of cutting and threading the G. I. Pipes for jointing the G. I. Specials etc., complete complying with standard specification.(TWAD- Pa no:42)

In water supply line

32mm dia GI elbow

25mm dia GI elbow

20mm dia GI elbow

GI Bend

32mm dia

25mm dia

GI Tee

32mm dia

25mm dia

20mm dia

G.I.Reducer Elbow

25x20mm dia

20x15mm dia

G.I.Reducer Tee

32x25mm dia

25x20mm dia

GI Reducer

32x25mm dia

25x20mm dia

20x15mm dia

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve / Wheel Valve heavy type with ISI mark of the following sizes including cost of shellac, thread, including labour charges for cutting and threading of GI pipes as directed by the departmental officers etc., complete complying with standard specification for both internal and external water supply arrangements. The gate valve/ wheel valve should be got approved by the departmental officers before use on works.(TWAD- Pa no:43)

32mm dia G.M. Gate Valve

25mm dia G.M. Wheel Valve

Supplying and fixing in position 15mm brass C. P. screw down tap ( Heavy duty ) of best approved make and quality including cutting, threading. G. I. Pipes wherever necessary and fixing to the galvanized iron pipes in position etc., complete complying with standard specification ( Tap to be used on works should be got approved from the Executive Engineer before use).(TWAD- Pa no:22)

Supplying and erection of horizontal shaft centrifugal mono block power pump set of single phase 1.50 H.P of best approved quality and make with ISI mark on suitable pedastal with foundation bolt and nut including labour supplying and fixing of starter and main switch suitable for 1.50 H.Ppumpset on suitable angle iron frame work with necessary labour including panel board, supply and run off 4 of 10 Sq,mm, in P V C pipe with 14 SWG TC wire including fixing of suction pipe and foot valve up to a maximum depth of 7m and delivery pipes upto the exterior wall of pump room etc., complete and operating the pumps on trial run for 3 days. (The make and quality of pump set to be got approved by the Executive Engineer before use on works.) (TWAD- Pa no:94)150mx 20m

Ramp portion for Differently abled persons

Earth work excavation for foundation & drain in all soils and to full depth as may be directed except rock requiring blasting but inclusive of shoring strutting and baling out water wherever nessery etc

Collection and supply of M. sand filling in to the basement including cost andconveyance to the siteand all labour charges for filling as per standard speecifications

Cement Concrete 1:4:8, using 40mm metal including all cost of materials & labour charges etc., complete

Brick work in cm 1:5 using country bricksincluding all cost of material & labour charges etc., complete.

Plastering with cm 1:5 mix 12 mm thick for all RCC floor including all labour charges etc.,

Supplying and fixing of Anti-Skid tiles for approved quality including cost and labour fixing charges etc.,complete.

Manufacturing,supplying and fixing of stainless steel hand rails for staircase using 50mm dia 304L grade stainless steel pipe of 1.6mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1mm thick as vertical at 900mm centre with 2 Nos of 25mm dia intermediate horizontal stainless steel pipe of 1.6mm thick in between.The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete.The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing,conveyance, electrical charges,ect.complete

FLOWER GLASS ARRANGEMENTS

Supply and fixing in position steel balustrades using 20 mm square rods inbetwaeen 15 cm interval and two balustrades in each step centrally located and the top shell be connected with the hand rails by means of MS flats of size 40mmx6mm and fixed with hand rails steel balustrades using 20mm square

Supplying and fixing of Bevelled Edge Mirror of size 600x450mm with ply wood back and aluminum beading complete complying with standard specification

Internal Electrification arrangements

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5 SD 25

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5 SD 26

Wiring with 3 x 1.5sqmm(22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylem sheet covered TW switch box and 5A F.T. switch SD 32

Supply and fixing of energy efficient 11W lamp on the battern holder SD 80

Supply and fixing of single box type 4'40 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(SD 88)

Supply & Fixing of AC / DC 76mm Buzzer /call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW Board with push switch.(SD105)

Renewal by Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.(SD110)

Renewal by Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.(SD111)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box(SD 133)

Supply and fixing of 8 way single pole and Neutral MCB sheet steel enclosure distribution board of metal double door type with IP 42 protection with bus bar and neutral link and provision of taking up cable of suitable size with 1 No. 32A spmcb as outgoin(SD 167)

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel double door type with 1 No. 40A 4 pole MCB Isolator as incoming and 12 Nos 6A to 32A SPMCB as outoing inflush with wall and making good of the concealed SD 179

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour. (SD 54)

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colo(SD 55)

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with sui(SD 56)

Supply and run of 4 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour (SD 60)

Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD 68)

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with sui(SD 57)

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD70)

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection(SD 76)

Supply and run of 1 of No.8 SWG GI wire for earth connection.(SD 74)

Supply and fixing of 32 Amps DP Switch of 500V with metal clad with fuse and neutral (Side Handle) on suitable TW Board with PWD Earthing(SD 143)

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cov(SD 233)

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work (SD 234)

Supply and fixing of TNEB meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick (SD 127)

Supply and fixng of TNEB Meter Board suitable for 3 Phases 100A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size(SD 130)

Supply and fixing of 4' 40 W Twin Mirror optic recessed mounting type fitting (Philips / Crompton / Wipro) complete with copper chokes and condensor, with louvers cover, on wall or ceiling, with PVC unsheathed leads from terminals to the fitting with flu.(SD 97)

Supply and fixing of 4' 40 W Twin Mirror optic suspension type fitting (Philips / Crompton / Wipro) complete with louvers cover complete with copper choke and condensor with conduit pipe suspension, with PVC unsheathed Copper leads from the terminals to (SD 96)

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem she(SD 40)

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) [Legrand (MDS) / Hager (L&T) make](SD 140)

Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD 68)

Supply and sun of 2 to 1.5 Sq.mm (2210.3)Pvc in suladel Sc Unsheathed Coppel Comductor of Iioov Gsade in Pvc Sigid of Pipe Concealed in Wall anc Ceiling Making Good of Tha Concoaled Portion With Suifable Coloas [Gang Bell & Call ball] (SD 105)

Supply and fixing of brass cable gland for 2 x 10 sq.mm PVC armoured LTUG cable, with earth connection(SD 182)

Supply and fixing of 100 Amps TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with earth connection only.(SD 169)

External Electrification arrangements

External Electrification ( 250W Sodium Vapour Fitting & lamp) outside the building

ELEVATION WORKS

Providing Elevation - Border With Rich Cement Mortar 1:3 Including Scoffolding , curing and all Labour Charges etc complete

Supply and fixing of Cement concrete Khooja (Panneer soombu) including all labour charges etc complete

UNDER GROUND SUMP

Earthwork for foundations and depositing on bank with initial lead of 10 Mt. and initial lift of 2 Mt. in sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth.

Supplying and filling in foundation and basement with M sand in layers of not more than 10cm thick well watered, rammed and consolidated etc., complete as per standard specification.

Laying the Plain Cement concrete 1:4:8(One cement four sand and eight broken Machine crushed stone jelly) using HBG Machine creased Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers. The rates inclusive of Centering , shuttering, strutting, propping,removal of form work if it is required and all leads ,lifts and curing etc..

Supplying and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid)

Reinforced Cement Concrete of mix 1:11/2:3 (One cement, one and half sand and three aggregate) with water proofing compound of 2% by weight of cement used and using 20mm size machine crushed granite stone jelly etc., complete.

Providing, supply, mixing laying cement plastering 20mm thick with cement mortar 1:4 mixed with water proofing compound Conplast X421IC conforming to IS:2645, @ 150ml per bag of cement (normal setting integral water proofing compound) as specified by the manufacturer over PCC leveling course including preparation of surface, dewatering, finishing, curing etc. all complete as per manufacture's Specification and direction

Providing, machine mixing and laying on the P.C.C/ R.C.C. surface in approved panels of 40 mm thick granolithic flooring in cement concrete mix of 1:2:4 (1 Cement: 2 Sand: 4 Aggregate 10 to 12 mm thick) well vibrated,compacted including 45 X 3 mm glass dividing strip, fixed to correct level and finished smooth and cured by keeping surfaces well-covered and protected against excess of an type. (The contractor to provide for preparation of surface by cleaning, hacking and exposing aggregate to achieve the best bond and any curling, lifting or beybonding noticed shall be rectified by the contractor at his cost).

Supplying and fixing in position C.I.Manhole covers (heavy duty) of various sizes of best approved quality and as per standard specificationsetc.,complete.0.6X0.6M Size etc., complete.

PVC mould CI steps for sump

Supplying, fabricating and placing in position M.S. or R.T.S. reinforcement grill for RCC works as per the design given including cost of steel and binding wire etc., complete complying with standard specification. (The contractor will have to make his own arrangements for the supply of M.S. plain rods / RTS rods and binding wire)

Rain Water Harvesting

Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Supply and filling 40 mm metal The Recharged Pit with Following Material as per Standard Specification 40 mm metal

Supply and filling 20 mm metal The Recharged Pit with Following Material as per Standard Specification 40 mm metal

Supply and filling M. Sand The Recharged Pit with Following Material as per Standard Specification 40 mm metal

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete.

Brick work in C.M. 1:5 (One cement and five sand) mixing with water proofing compound 2% by weight of cement using second class country bricks of size 8 3/4 x 4 1/4 x 2" etc., complete.

Plastering with cement mortar 1:5 (One cement and five sand) 12 mm thick in all floors including cost of scafolding, finishing, curing etc.

supply and fixing pvc pipes for rainwater arrangement of Following dia meter including cost of special like bend ,shoe braket etc

Supply and following pvc speical etc

110 mm Elbow with Door

110 mm Tee

110mm Elbow

Provision for Incinator

Providing Incinator including all Labour Charges etc complete

Water Storage Tank Pedestal

Brickwork in CM 1:5 mix, using II class bricks of size 23x11x7 cm for the following including curing etc., complete as per standard specifications

Plastering with cement mortar 1:5mix, 12 mm thick including cost and conveyance of all materials to site and all labour charges etc, complete as per standard specifications etc.

Supplying and Erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened

RCC 1:1 1/2:3 with water proofing compound of 2% by weight of cement and using 20mm size machine crushed granite stone jelly

Special ceiling plastering with cement mortar 1;3. using 10mm thick in all floors etc.,complete.

Painting with Plastic Emulsion paint 2 coats over one coat of priming cost for approved quality including cost and labour charges etc.,complete.

Supplying, fabricating and placing in position M.S. or R.T.S. reinforcement grill for RCC works as per the design given including cost of steel and binding wire etc., complete complying with standard specification. (The contractor will have to make his o

GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column "BB" for all works in this package}

N.NANDAKUMAR

Bidder Name

N.NANDAKUMAR

J.venkatesan