GE 874/EWS-45/2023-24

Amount

BR and EM Portion

Demolition of cement concrete (Un - reinforced ) in ground floors and pavings n.exc. 15cm thick. (Below or above ground level).

75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as directed by Engr-in-Charge.

M&L Chequered cement concrete tiles (200x200x25mm) thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed of 1:4 cement mortar.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non-skid ceramic coloured tiles 7-8 mm thick,area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L of Glazed ceramic coloured tiles in vertical surface size 350 x 250 x 7 mm / 450 x 350 x 7mm thick in set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat/ screed bedding in cm 1:4 for laying Vertical surface finishes etcc omplete all as specified and directed.

Dismantling plain or corrugated steel sheeting,any gauge ,thickness including Nainital or similar pattern roof covering .

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screw as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet.

M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in ceiling

M&L for Preparation of newly un-treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

M&L for Preparation of old painted surfaces and applying two coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

M & L Plain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails.

Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work .

M & L second class soft wood in scantling clean swan complete all as specified.

All as per item above but except timber.

Taking down chowkat with shutters exc.1.5 Sqm but n.exc.4 Sqm (without taking off shutters from chowkhat)

Taking down chowkat with shutters n. exc.1.5 sqm (without taking off shutters from chowkhat)

Taking down shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and as directed.

Taking down shutters of any description exc. 1 sqm but not exc. 2 sqm each and refixing in the same opening after resecuring or easing & adjusting complete all as specified and as directed.

S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid all as specified.

S & F plain framed, panelled shutters 35mm thick 2nd class softwood, (any numbers of panels), with panels of timber flats on both sides,or of veneered particle board med density, wood particle board with commercial face or 9mm BWP plywood fitted to chowkat.

S & F glazed & skeleten shutters 30mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (b) fitted to chowkhats.

Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick sorrounds, glazad with putty or fixed with beads.

S&F 4 mm Sheet glass ordinary quality in square n.exc. 0.5Sqm in each pane.

S&F 100 mm long butt hinges extruded aluminium anodised.

S&F 75 mm size mild steel butt hinges medium weight.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section.

S&F 100 mm long aluminium anodised barrel tower bolt of exturded section

S&F aluminium anodised alloy handles fabricated type 150mm size of handle.

S&F 100 mm long aluminium handles cast type anodised.

S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section

Demolition of Brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stonework and precast concrete articles.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 Complete all as specified and as directed.

Taking down of cement plaster of any desc including racking out of joints hacking for keys and scrubing down with water etc

M&L for Rendering 15mm thick on stone/brick masonry surfaces or other than fair faces in cement motar 1:6 finished even and smooth (without using extra cement).

M&L of Rendering 15mm thick on stone masonry surfaces or other than fair faces in cement motar 1:4 finished even and smooth (without using extra cement).

M&L for Preparation new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and as directed.

M&L for preparation of new or undecorated surfaces of wall and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic distmper over a coat of primer complete all as specified and as directed.

M&L for Preparation of old/undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and as directed.

M&L for complete removal of existing treatment of any description and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic distmper over a coat of primer complete all as specified and as directed.

Supply & Fixing in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified.

S & F in repair Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe including providing and fixing plugs with and including 60mm long brass screws, pointing around urinal back in cement with PVC 32mm dia waste pipe & waste coupling incl spreader complete all as specified.

S&F in repairs vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed.

S&F in repairs PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.

S&F Stop valves/angle valve cast copper alloy,fancy type ,chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe,in repair.

S&F in repairs pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and as directed.

S&F in repair Bib taps cast copper alloy ,chromium plated,with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore.

S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S&F in repair Grating doom 100mm dia of PTMT (minimum weight 25gms) suitable for floor taps, all as specified and directed.

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.

Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches.

S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door.

S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door.

S&F PVC (SWR) reducers any radius 110mm bore.

S&F PVC (SWR) vent cowl 75mm dia.

M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement, in repair.

Demolition of cement conc (Reinforced ) in ground floors and pavings n exc. 15cm thick.(Below or above ground level).

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls, lintel beams or shelves complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers , lintels, cantilevers, shelves/slabs incl supports, overhangs etc also splays between floors and beams etc all as specified.

M&L MS TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.

All as per item above but 6mm to 8mm dia as in stirupps/spacers complete all as specified and as directed.

M&L 2nd class softwood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and doevetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall/ceiling panelling 15mm including cornice and beading as required and applying two coats of varnish over a filled coat of thin varnish after preparation of the surface, complete all as specified and as directed. Note : Framework shall be measured and paid separately.

M&L for E-board ceiling 6mm thick pre-coated non asbestos E board classic designer tiles of size 595 x 605mm manufactured by Everest Eternite Ltd. Fixed in GI snap grid inter locking system powder coated at bottom of same manufacturers including GI wire as per manufacturer specifications. if pre coating is spoiled by worker while fixing of tiles the complete tile surface shall be provided with 2 coats of plastic emulsion paint without any price adjustment.

Dismantling timber scantling under 40 Sqcm as in fillets, rails, posts, rafters, purlins, or in any position etc in unframed work complete all as specified.

M&L for Preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

S & F glazed & skeleten shutters 35mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) fitted to chowkhats.

S & F in Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 300mm, MS ordinary rat tailrod pattern springs including roller and roller plate complete.

S & Fixed in repairs Harrison rails/Curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white incl plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & incl P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F Two Way Bib taps cast copper alloy ,chromium plated,with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, in repair. Make: Cera/ESSCO or its equivalent.

S&F in repairs central basin mixer chromium plated 15 mm including 18 inch long braided pouch connection with brass nuts complete or as specified and directed; Make: Cera/ESSCO or its equivalent.

S&F in repairs wall mixer cromium plated 3 way including telephonic shower all as specified. Make: Cera/ESSCO or its equivalent.

S&F in repairs towel ring of brass chromium plated complete all as specified and as directed. Make: Cera/ESSCO or its equivalent.

S&F in repairs health faucit (hand shower) cromium plated complete all as specified and as directed. Make : Cera/ESSCO or its equivalent.

S&F in repairs Chromium plated shower roses with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified.

S&F in repairs corner glass self made of 12mm thick 250mm radius between flanges of brass chromium plated D clamps complete all as specified and as directed. Make: Jaguar or its equivalent.

S&F 500 Ltr capacity PVC water storage tank (cylinderical vertical with closed top ) and fixed in position all as specified in SSR Part -I, including dismantling of old tank.

S&F ball valves, high pressure,with polythene float and flynut complete ,20mm bore ,in repair.

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends, in repair.

Lagging to pipes 15mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified.

Lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified.

M&L Veneered decorative plywood, 6mm, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in ceiling complete.

M&L Veneered decorative plywood, 6mm, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work as in walls complete.

M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in lining.

All as per item above but except plywood.

Dismantling of boarding of any description fitten in any position with nails.

S&F 20mm thick 2nd class softwood boarding , planed one side , with butt joints and fixed with nails in facia eaves boarding complete all as specified and direced by Engr-in-Charge.

M&L 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps.

All as per item above but fixing only except boarding.

S&F 25mm thick 2nd class softwood boarding in floor, planed one side, with butt joints and fixed with nails

All as per Item above but except timber for repairs in existing floors including cutting out, peicing, heading joints complete all as specified.

M&L for Random rubble masonry using sand stone uncoursed well bonded bedded and solidly hearted built in CM 1:4 complete all as specified and directed.

all as per item above but except stone.

M&L Hard core of guage n exc 63 mm of broken stone or boulders

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed.

Excavation over areas n.exc 1.5m in depth and getting out in any type of soil, complete all as specified.

Excavation in trenches n.exc 1.50m wide and n. exc 1.50m in depth and getting out any type of soil.

M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation of walls etc, complete all as directed by Engr-in-Charge.

M&L 40mm DPC in PCC 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork using WPC as per manufacturer's instructions complete all as specified and as directed.

Supply only liquid water proofing compound.

M&L of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engr-in-Charge.

S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members weight per square metre n.exc 4 Kg/Sqm all as specified and directed

M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without without any attachment all as specified and directed by Engr-in-Charge

M&L Mild steel, plain, black sheet 0.63mm thick as in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed,holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed by Engr-in-Charge.

S&F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified and directed.

S&F 250mm long Mild steel sliding door bolt with hasp & stapple (bolt type) and fixing clips of sheet/welded, cast or extruded section and fixing bolts and sliding bolt of extruded section.

M & L rendering 10mm thick on brick wall or concrete surfaces in cement mortar 1:4 finished fair and even complete all as specified

M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed.

S&F medium grade galvanised steel tubing with all fittings laid in trenches for 40 mm bore GI tubing.

M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands,plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone,bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed.

Returnng, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and as directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed.

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade including casing and capping (ISI marked) for one light/ fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per item above but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on the same board.

All as per item above but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item above but wiring with 2.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S & F switch socket combination 2 in 1,5A, flush type.

S & F switch socket combination 5 pin 16A, flush type.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' curve series, all as specified and as directed by Engr -in-Charge.

S & F of MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve .all as specified and as directed by Engr -in-Charge.

M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings.

S&F LED, 20 Watts, 4 ft, fittings complete with all accesories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.

Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire.

Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the platenot less than 1.5 mtr below normal ground level, connected galvanised earrth lead wire 4.0mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shoen in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.

S&F 09W/10W Bulk head liminiares including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fix LED Bulb 9 Watt all as specified and directed by Engr-in-Charge.

Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size16 Sqmm 2 core complete all as spd and as directed.

patriotic builders

M/s Sajad Hussain Wani

GH MOHD SHAH AND CO

M/s Sana Constrruction Co

Bidder Name

patriotic builders

GH MOHD SHAH AND CO

M/s Sajad Hussain Wani

M/S BEE AAY CONSTRUCTIONS

M/s Sana Constrruction Co