Work of shifting of high tension/LT lines passing over the government schools in Jama Yojana under EDD- Kakod, Bulandshahr.

Amount

Carriage of fallowings from ESC. BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, rcquricd for proper completion of work, distance about to 60 Kms.

8.5 mtr Long PCC Pole.

11mtr Long PCC Pole.

Carriage of All line Material from store center BSR to at site ACSR Weasel, XLPE Cable ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator, Pin Insulator, X-arm, LT Distribution Box etc. store to site dis. 50 Km.

Erection of Single 8.5 mtr Pcc Pole support including complete IT fittings with channelas per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of Dobule pole 8.5 mt PCC pole and 11 KV fittings as per RESPO Drawing Top Channal, Dropper Channal, X Bracing Set, Disc Insulator, Earth Rod, Pin Insulator, Guarding Angle F Bracket and etc as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of Single 11 mtr Pcc Pole support By Crane/Hydra including complete IT fittings with channelas per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of 8.5/11 Mtr Pcc Pole support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Stay Set Complete with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Cutting /drilling /fabrication of channel and angleWelding of MS Angle iron for making guarding angle size 65x65x6/50x50x6 mm including the work of fixing the bracket on PCC/ST pole for construction of the line.

The folloing material is required to be Providing & Fixing by contractor.

Dead End/ Suspension Clamps with GI Hooks

Holding clamps with Nut & Bolt

F-Bracket with clamps & Nut & Bolt

Barbed Wire

MS nut & Bolt off size.

Making Of 250 KVA TF Plinth With Material As Per Respo Mannual

250 KVA TF Fancing With Material As Per Respo Mannual

Laying, sagging. Stringing and binding and jumpering of ACSR Weisal , rabbit, dog newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

Fixing of Earthing Complete

Fixing of Stay Set Complete

ACSR Weasel conductor

3x95+1x35+1x16sq mmLT AB cable

Laying in Air Of 3x120 Sq mm 11 kv XLPE cable

Laying in HDPE Method Of 3x120 Sq mm 11 kv XLPE cable With Laying material

Fixing of Droper Channel

Fixing of Top Chennal

Fixing of T-off chennel

Fixing of TF Base Angle

Fixing of Bracing Angle

Fixing of Guarding Angle

Fixing of 11 Kv Pin Insilator with pin and nut

Fixing of 11 Kv Disc Insilator with fitting

Fixing of 11 Kv Cross Arm

Safe Dismantling old ACSR Weasel/ST Pole/MS Channel/MS Angle/X-Arm/Pin Insulator/Disc Insulator & Balance Material Deposit In Store After use At Site

Safe Dismantling & Erection 8.5 Mtr PCC Pole/11 Mtr Rail Pole Site to At Site

Safe Dismantling10/25/63/100/250 KVA TF & Installed New DP

Safe Dismantling100/250 KVA TF & Installed New DP

Guarding Of 11 KV Line

Fixing of 3 Phase Distribution Box

Making/ Filling Of 11 KV Cable Jointing Kit 3x120 Sq mm O/D

All work will be done as per UPPCL/RESPO Rules.

NIKITA ENTERPRISES (BID ID -5525084)