Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹32.8 L+₹3.3 L (11.0%)Rejected-Finance 218 D 1A JYANTIPUR NEAR SHYAM PIPE FACTORY SULEM SARAI PRAYAGRAJ UP | PRAYAGRAJ | PRAYAGRAJ | UP | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹34.4 L+₹4.8 L (16.3%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹34.8 L+₹5.2 L (17.8%)Rejected-Finance 22B HEMILTAN ROAD GEORGE TOWN PRAYAGRAJ UP 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹36.9 L+₹7.3 L (24.9%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹48.3 L
EMD Value
₹96,600
Closing Date
13 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
GE WEST PRAYAGRAJ PIN-211001
SPECIAL REPAIR TO SECURITY LIGHTS AT GE (ENGR PARK) NEW CANTT AND TOILET OF 100 OTM 508 ABW CHHEOKI UNDER GE WEST PRAYAGRAJ.
2023_MES_614430_1
8678/E8
Open Tender
Civil Works
Item Rate
180 days
GE WEST PRAYAGRAJ
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE WEST PRAYAGRAJ
₹96,600
Yes
8 Nov 2023
18 Aug 2023
14 Sept 2023
18 Aug 2023
13 Sept 2023
1 Sept 2023
Amount
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 100mm thick plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of flooring complete all as specified and directed.
M&L non skid, ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.38 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured wall tiles in vertical surface 350x 250x7mm / 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified.
Taking down cement plaster on brick wall or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on other fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds and efflorescent salt and trading oil and greasy spots and stopping of distempered surface and applying two coat of oil emulsion distemper of approved shade over a coat of primer complete all as specified and directed
Hacking out old broken glass ( any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/ metal pins complete all as specified and directed
S& F of sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc.1.5 sqm each not exc. 4.00 sqm each complete all as specified and directed.
S & F Solid PVC moulded door frame of size 50mm x 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face with particle board core complete all as specified and directed.
S&F 100mm size mild steel, butt hinges, cold rolled, medium weight complete all as specified and directed.
S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.
S&F 150 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.
S&F 100 mm long aluminium locking bolts anodised with bolt not less than 10 mm dia, complete all as specified and directed.
S&F in repairs vitreous china water closet squatting pan " Orissa Pattern" of size 580 X 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including cast iron P or S trap, front or back inlet and making connection to trap & to flushing cistern complete all as specified& directed. Note:- The unit rate is quoted is inclusive of making good the disturbed surfaces.
S&F vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.
S&F in repair PVC valve, symphonic action type, flushing cistern 10 liters capacity low level white with inlet ,ball valve ,float and handle including bracket & flush pipe complete all as specified and directed.
S&F in bib taps with wall flange 15mm bore, fancy type, quarter/half turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories fixed in repair complete all as specified and directed.
S&F in repair Pillar taps, cast copper alloy, swan neck type, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.
S&F in repair CP Stop valve/angle valve 15 mm bore (weight should not be less than 0.4kg each), fancy type chromium plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed.
S&F in repair PVC connections 15mm bore size 450mm long of pressure rating 6 kg/sq cm with CP brass nuts complete all as specified and directed.
S&F 110 mm dia cast iron floor/Nahani trap with gratings including jointing to waste pipe, fixed in plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) and jointed in run lead complete all as specified and directed.
Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
S&F 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
S&F 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete all as specified.
S&F in repair rotational moulded, triple layer HDPE water storage tank (white colour three layer) of 2000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and directed.
S&F ball Valves 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified & directed.
S & F 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
M&L for preparing plastered or unplastered old decorated surfaces of wall including cornices etc by brooming down or steel wire brushing ,scrapping down smoke shoot, moulds, mos and efflorescent salts and trading oil and greasy spots, removal of vegetation and applying one coat of white wash on ceiling surfaces complete all as specified and directed.
S&F vitreous china premium/ Ist quality wash down water closet wall hung EWC white / ivory / off white closed pattern including all necessary accessories like rag bolts/ get gasket etc (excluding flushing cistern & flush pipe) complete all as specified and directed
S&F in repair vitreous china urinal, bowl type, of size 465X355X265 mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.
S&F vitreous china urinal white partition of size 310 mm x 700 mm complete all as specified and directed.
S&F brass chromium plated shower rose 100 mm size , shower arm with or without swivel joints in repair complete all as specified and directed.
S&F CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, fancy type, superior quality, fixed in repair with screws complete all as specified and directed.
S&F 15 mm dia mild steel chromium plated health faucet (ABS body) with 1.25 m long flexible pipe with wall hook complete with all fittings complete all as specified and directed.
M&L for Laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm i.e. overlap and 150mm end overlap, sealing all overlaps and bonded to the surface by fusing and bonding torch on method complete all as specified and directed. Note: Work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.
M&L for 10mm thick plaster in CM 1:3 over concrete surface of roof when concrete is green complete all as specified and directed.
M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade concealed conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed conceal surfaces including taking down old existing point wiring complete all as specified and directed. Note:(a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface.
One light/fan/bell point controlled by one switch
One point for socket outlet 5 amps on independent board but not below the switch board in same vertical plane.
One point for socket outlet 3 pin, 5 amp on the same board with other switch.
All as per srl item No. 45 above but for one 3 pin socket outlet 15 amps, independent, with cables 2.5 sqmm size on independent board 1.5 Sqmm earth wire complete all as specified and directed.
S&F switch piano flush type single pole one way 6 amps complete all as specified & directed.
S&F Socket out let 2 in one, 5/3 pin 5 Amp complete all as specified & directed
S & F switch socket combination multipurpose 2 in 1, 6 pin, 6 and 16 Amp, and flush type universal for power point wiring complete all as specified and directed .
S&F ceiling rose 3 pin/PVC/ polycarbonate, isolated body with colour ring for fan point wiring complete all as specified and directed.
S&F batten/angle holder with colour ring for light point complete all as specified and directed .
S & F in replacement for LED light fitting with box type ultra slim linear LED lighting fixture with co- extruded polycarbonate body environmental friendly, energy efficient tube light complete with all accessories internally pre- wired and including LED lamp 20 watt 01 No and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F in replacement LED mirror light fitting 2 feet, 10 watt with high output with opal diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size & suitable for mounting clamps PVC square box 75x75mm - 2 nos etc complete all as specified and directed.
S&F sheet metal enclosure for MCB's 240 volt 8 way single pole and neutral with 200 amps rated busbar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.
M&L for concealed submain wiring using FRLSH PVC insulated, unsheathed stranded copper conductor cable two single core of size 4.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories alongwith one run of PVC insulated unsheathed stranded copper conductor of size 2.5 Sqmm as earth continuity conductor including taking down complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.
S&F Exhaust fan 300 mm sweep steel body Range complete and shutters including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provn of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories required for fixing of fan including testing complete all as specified and directed.
S&F in replacement MCB SPN 40/63 Amps 'C' series, breaking capacity 10 KA of rating & making connection complete all as specified and directed.
S&F in replacement MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
Excavation in trenches n.exceeding 1.50m wide and n.exc 1.50m depth for foundation etc or for shafts, walls, cess-pits, manholes, pier holes, cable etc n.exc. 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.
Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified & directed.
Returning, filling in including spreading, levelling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.
M & L for sand cushioning with Ganga Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified & directed. Note:- Punned thickness shall be measured for payment.
Supply & laying of unreinforced precast concrete cable cover class LV, Type I, flat of size 300mm x180 mm x 40 mm complete all as specified & directed.
Disconnect the all electric connection from electric pole and Dismantling & taking out old existing rusted / damaged security light poles of 9 / 11 mtr long from foundation by broken complete embedded PCC and coping and making good the surface by earth filling and well ramming & levelling complete and transported the dismantled pole to appropriated location and deposited complete all as specified & directed by Engr-in-charge.
Re-fixing / Re-erecting of old existing electric pole of 9 / 11 mtr long at other location within New cantt area in vertical position embedded in PCC foundation & include the following complete all as specified and directed. (a) Excavation in post hole not exceeding 1.5 Mtr wide & 2 Mtr deep for pole foundation & getting out in soft loose soil, returning, filling in the excavated soil after fixing the pole in foundation, ramming earth around in layers n.exc 25 cm thick and disposal of surplus soil to a distance n.exc 50 metres. (b) M&L for Providing PCC 1:4:8, type D2 ( using 40 mm graded stone aggregate) in foundation 600mm x 600mm x 1500 mm for concrete encasing the pole upto GL all as specified and directed. (c) M&L for Providing PCC 1:3:6, type C2 (using 20 mm graded stone aggregate) for plinth block /Collar above GL, 300 mm high and 450x450 mm size. (d) M&L for Painting of pole externally with one coats of black bituminous paint (upto planting depth) and above plinth block/ concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surfaces including painting of 30 cm wide black bands 3 Nos with synthetic enamel paint in alternate layers upto the height of 1.5 Mtr above plinth block.
Dismantling old / existing cross arms of MS channel or angle section etc complete & deposited, setting a side complete all as specified & directed by Engr-in-charge
Dismantling old / existing insulator any type & any size etc complete & deposited, setting a side complete all as specified & directed by Engr-in-charge
Dismantling old / existing stay assembly from foundation by broken complete embedded PCC and making good the surface by earth filling and well ramming & levelling complete all as specified & directed by Engr-in-charge.
Dismantling old / existing earth wire or copper conductor complete all as specified & directed by Engr-in-charge.
Dismantling old / existing ACSR conductor complete all as specified & directed by Engr-in-charge.
Dismantling & taking down old / existing security light fitting of any wattage by disconnecting all electrical connection complete all as specified & directed by Engr-in-charge.
S&F of steel tubular electric pole SP-31, swaged type, welded 9 metre long single complete with CI base plate, bolts, nuts & screws all as specified including the following:- (a) Excavation in post hole not exceeding 1.5 Mtr wide & 2 Mtr deep for pole foundation & getting out in soft loose soil, returning, filling in the excavated soil after fixing the pole in foundation, ramming earth around in layers n.exc 25 cm thick and disposal of surplus soil to a distance n.exc 50 metres. (b) M&L for Providing PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) in foundation 600mm x 600mm x 1500 mm (planting depth) for concrete encasing the pole upto GL (c) M&L for Providing PCC 1:3:6, type C2 (using 20 mm graded stone aggregate) for plinth block /Collar above GL, 300 mm high and 450 mm dia (d) M&L for painting of pole externally with one coats of black bituminous paint (upto planting depth) and above plinth block/ concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of surfaces including painting of 30 cm wide black bands 3 Nos with synthetic enamel paint in alternate layers upto the height of 1.5 Mtr above plinth block.
M&L for bracket made out of 25 mm bore medium grade GI pipe bracket 1.2 mtr long duly bent to shape including 2 Nos M.S. flat ( 25 mm x 4 mm) clamps, nuts, bolts washers etc fix on wall / pole and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed.
Supply ,fixing, commissioning & testing of LED Security light fittings 100 Watts , IP-65 cast aluminium housing in grey hammer tone stove enameled finish outside with electric connection of electronic driver and LED panel with suitable size of copper cable with base plate and complete all as specified and as directed. Make - Philips Cat Part No. BRP062 LED 100 CW SLA S1 PSU or equivalent make as specified in P.S.
S & F Polycarbonate cable looping box of size 100 x 100 x 60 mm with connector block 4 way , including provision for copper shorting strips etc including suitable stainless steel gland, including provision for connecting earth continuity conductor etc complete all as specified and directed. Make :Hensel Cat No DK 0606 B or equivalent make as specified in P.S.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4.0 core complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2.0 core complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items
M&L for 50 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified & directed.
M&L for 80 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified & directed.
M&L for cutting of PCC/Hard standing/WBM road not exceeding 30 cm in width not exceeding 60 cm in depth for passing of HT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e. bitumen/PCC 1:3:6 type C-1 using 20 mm graded stone aggregate complete all as specified and directed.
M&L for boring under road horizontally of size 50/80 mm bore of GI pipe for passing of cable in road in hard/soft/ loose soil complete all as specified and directed.
Supply, installation, commissioning and testing of out door type street light control panel made out of 14 SWG CRCA steel sheet, dust protected, vermin proof, having hinged doors with locking arrangement, canopy at top complete with following control accessories, powder coat painted , control wiring etc. as required. (internal street lighting) to be installed on suitable concrete bed or with angular iron frame complete all as specified & directed. (a) 40 amps 4 pole isolator - 1 No (b) 32 Amps, 3 pole contactor - 1 No. (c) Time switch for 24 hour operation -1 No (d) Bypass arrangement by way of toggle switch - 1 No. (e) 32 amps TP MCB on din channel - 3 Nos. (f) Neutral Link/Connector - 1 No Note:- Cost of PCC foundation and earth work are deemed to be included in quoted rate
M & L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI earth wire 4mm dia by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 15 mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade, funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8 mm MS bars at 150 mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing including disconnecting the old unused earthing complete all specified and directed.
M/s RAM LAKHAN GUPTA
Hi-Tech Constructions
M/S VIVEK DUBEY
M/S JAI DURGA CONSTRUCTION
Vibha Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .