CONSTRUCTION OF PULLET GROWING PEN HOUSES 3 UNITS INCLUDING ELECTRIFICATION AND PLUMBING 1800 SQ FT COMPOST PIT

Amount

S.W.I. Work Portion

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc., complete. (Lift upto 1.5m) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc., complete. (Lift upto 1.50m) By Mechanical Means

Providing soling using 80mm size trap metal in 15cm.layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc., complete. With fine aggregate (Crushed sand VSI Grade)

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in CM 1:6 in foundations and plinth of inner walls / in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete.

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc., complete

Filling in plinth and floors with contractors material / brought from outside and approved by Engineer in charge in layers of 15cm to 20cm including watering and compaction etc.complete

Providing internal cement plaster 20mm thick in Single coats in cement mortar1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curingetc.complete.

Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic microproce-ssor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc., complete.With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc., as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and laying cement concrete flooring 40mm thick with M15 cement concrete laid to proper level and slope in alternate bays, including compaction, filling joints, marking lines to give appearance of tiles of 30cm x 30cm or other size laid diagonally / square etc., finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed sand VSI Grade

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete (Weight of 5.5Kilogram/sq.m.).

Providing and fixing plain zinc sheeting of 0.80mm thick (22B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete. (Weight of 6.8 Kilogram/sq.m.).

Providing and fixing solid core flush door shutter commercial in single leaf 32mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete.

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6mm dia. bars 3Nos. and stirrups @ 250mm c/c and fixing in wall with 6Nos of holdfast of 12mm dia bars500mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .

Providing and fixing welded mesh of 50mm x 25mm and (11gauge) to Country cut teak wood frame work as per detailed drawing or as directed, iron fastening with one coat of primer, scaffolding, including TW frame work of 70mm x 75mm and covering CCTW battens of 45 mm x 10 mm etc. complete.

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Plumbing portion :

a) Providing, laying and fixing P.V.C. pipe of 20mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete including removing existing pipeline if necessary and conveying and stacking the same as directed etc. complete.

c) Providing and fixing 20mm dia. Screw down bib/stop tap of brass including necessary socket union nut complete.

Royalty Charges

Laboratory Testing Charges

a) CEMENT : Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness

b) AGREEGATE: Water Absorption, Specific Gravity, Impact Value, Crushing Value, Sieve Analysis., Abrasion Value, Flakiness Index & Elongation Index, Stripping Value, Soundness

c) SAND : Fineness Modulus ( Sieve Analysis ),Silt & Clay Content, Chloride & Sulphate Content, Silt Factor

d) BRICKS: Water Absorption, Compressive Strength, Efflorescence

e) CONCRETE: Compressive Strength of C.C. Cube

f) STEEL BAR : Tensile strength, % of Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress

Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct

VAIBHAV SANJAY SAWANT (BID ID -6621990)