Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.0 LAccepted-AOC 29 GOBRA GORISTHAN ROAD KOLKATA 700046 | KOLKATA | KOLKATA | WEST BENGAL | 700046 | ₹2.0 L | L1 | Accepted-AOC Lowest Bid value. |
| 2 | L2₹2.0 L+₹2,346.55 (1.20%)Rejected-Finance B 29 H 4 GOBRA GORASTHAN ROAD BAMUNPARA KOLKATA 700046 | KOLKATA | KOLKATA | WEST BENGAL | 700046 | ₹2.0 L+₹2,346.55 (1.20%) | L2 | Rejected-Finance Higher then L1 |
| 3 | L3₹2.0 L+₹5,846.83 (2.99%)Rejected-Finance 418 KALITALA PARK KOLKATA KOLKATA KOLKATA 700070 | 24 PARAGANAS SOUTH | WEST BENGAL | 700070 | ₹2.0 L+₹5,846.83 (2.99%) | L3 | Rejected-Finance Higher then L1 |
Tender Value
₹2.0 L
EMD Value
₹4,000
Closing Date
2 Jun 2026, 2:00 pmClosed
Executive Engineer(M), ARSM SQ.
Raja Subodh Mollick Sq. Kolkata 700013
REPAIRING AND SERVICING OF DEWATERING CENTRIFUGAL PUMPS, 200 MM , 150 MM DIA AIR VALVES WITH CHANGE OF GI PIPE, NRV AND VALVES AT PARK CIRCUS BPS.
2026_KMC_1024770_1
KMC/WS/ARSM/RT/68/2025-26
Open Tender
Miscellaneous Works
Percentage
15 days
Park Circus BPS.
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹4,000
5 Sept 2026
23 May 2026
4 Jun 2026
23 May 2026
2 Jun 2026
23 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 1. Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (h) (ii) 80 mm dia. Medium quality | 16 | METER | 818 | ₹13,088 |
| 2 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 4. Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (ii) 80 mm dia | 1 | EACH | 5,526 | ₹5,526 |
| 3 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 5. Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (ii) 80 mm dia | 1 | EACH | 5,591 | ₹5,591 |
| 4 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 9. C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. (ii) 80 mm | 1 | EACH | 3,857 | ₹3,857 |
| 5 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 9. C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. (i) 50 mm | 2 | EACH | 2,757 | ₹5,514 |
| 6 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 9. C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. (i) 50 mm | 8 | METER | 540 | ₹4,320 |
| 7 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS (b) Repair Works 1. Labour for dismantling G.I. pipe with fittings. (viii) 80 mm | 16 | METER | 11 | ₹176 |
| 8 | CHAPTER - VII MISCELLANEOUS ITEMS Repair of Air valve by supplying ebonite and- rubber ball. gasket. nuts and bolts with washers and labour all complete Diameter in mm 200 | 1 | EACH | 4,792 | ₹4,792 |
| 9 | CHAPTER - VII MISCELLANEOUS ITEMS Repair of Air valve by supplying ebonite and- rubber ball. gasket. nuts and bolts with
washers and labour all complete Diameter in mm 150 | 2 | EACH | 3,897 | ₹7,794 |
| 10 | CHAPTER - VII MISCELLANEOUS ITEMS Supplying. fitting and fixing air valve splash plate useing 24 mm thick MS plate) according to necessary site measurement as per direction of EIC. | 2 | EACH | 4,224 | ₹8,448 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
Tendernotice_2.pdf
PDF • 0.53 MB
BOQ_2518371.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .