Construction Of Community Hall in Vilvaganapathi Street Near Ottiambakkam Panchayat in St Thomas Mount Panchayat Union. under the Scheme of MLA CD S 2024 2025 Estimate Amount Rs 96.00 Lakhs

Amount

EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead and lift etc.,including levelling the sites complete complying with standard specifications and as directed.

Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

CEMENT CONCRETE 1:4:8 mix using 40mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification.

Supplying and filling of conveyed earth with a lead of 1Km for basement filling.

Supplying and erecting CENTERING for sides and soffits including supports and strutting upto 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOSKS. STAIRCASE WAIST and landing slabs, landing beams, canopy etc., in all floors with all cross bracings using mild steel sheets of size 90cm * 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over countrywood joists of size 10cm * 6.50cm spaced at about 90cm centre to centre and supported by Casuarian props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed.

Centering upto basement level

Ground Floor

Terrace Floor

Supplying, fabricating and placing in position mild steel/Ribbed tor steel rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specfication. Fe 500

As per steel schedule

Design M25 mix using 20mm machine crushed 20mm gauge hard broken granite stone jelly for all reinforced cement concrete works connected to this work excluding cenetering, shuttering and cost of reinforcement grills placed in position, but including laying, vibrating, curing and finishing, fixing fan clamps in the RCC floor and roof slab works wherever necessary and bearing surfaces of the wall at the sides and bottom of the slab, beams shall be finished smooth with cement mortar 1:3 (One cement and three sand ) and Kraft paper laid without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers.

Basement

Ground Floor

Head Room

SPECIAL CEILING PLASTERING and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (one cement and three sand) 10mm thick and including hacking the surfaces and providing necessary cem,ent mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc.,complete complying with standard specification.

Brick work in cement mortar 1:5 using country bricks of size 83/4"x41/4"x23/4" etc., complete

For basement

For superstructure-GF

For superstructure-Head Room

PLASTERING with cement mortar 1:5 (one cement and five sand)12mm thick in all floors complying with standard specifications.

WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be added) over the RCC roof slabs in the proportion of brick jelly to lime being 32:12.5 by volume and laid in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden beaters if approved pattern keeping the surface constantly wet by sprinkling lime jaggery water as per standard specification etc., complete as directed by the departmental officers.

Finishing the top of roof with one course of PRESSED TILES of size 23cm *23cm *2cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement used and the top pointed with same mortar mixed with redoxide to the full depth of tiles, complete complying with standard specification. (The rate is inclusive of redoxide and water proofing compound ) and as directed by the departmental officers.

Paving the floor with best quality Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with best approved quality,Plain ceramic tiles of size 305x305x6mm

Fabrication and supply of Mild Steel Door of any required size with double leaf,outter frame of 35x35x 5mm equal MSL angle and shutter frame made of 25x25x5mm equal MSL angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 2Nos.horizontal and 3 Nos. diagonal for each shutter using M S flat of size 20x5mm fully covered with 18 gauge plain M S full sheet welded with shutter frame neatly and also fixin by welding 6 Nos. of hold fasts,2 Nos. wind appliances,3 Nos. tower bolts,1 No. aldrop2 Nos. handles, fixing shutterwith6 Nos.of hinges with outter frame of the door including painting the whole unit with one coat best quality of red oxide primer.

Door 1.50x2.40

Door 1.20x2.40

Door 1.00x2.10

Door 1.00x2.10 (Head Room)

Fabrication and supply of Mild Steel Window of any required size with Three leaf.Outter frame of 35x35x 5mm equal MSL angle, Mullion section made of 35x 35x5mm equal T-section, shutter frame made of 25x25x5mm equal MSL angle for horizontal and vertical members and the shutter frame strengthened by stiffeners of 1No.horizontal for each shutter using M S flat of size 20x5mm fully covered with 18 gauge plain M S full sheet welded with shutter frame neatly and also fixin by welding.Protective grill with 12 mm squqre M S rods at an intervel of not grater than 10 cm centre to centre to the outter frame.2 Nos of peg stays with hole for keeping the windows open in different positions,2 Nos. of locking handles fixing the shutters with 4 Nos. of hinges hold fasts, 6 Nos.of hinges with outter frame of the window including painting the whole unit with one coat best quality of red oxide prime including labour charges for fixing (window size 1.80 x1.50)

Solid PVC Door shutter using 19 gauge 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable suitable rebate for housing the shutter (0.75 x 2.10)

Painting two coats using I st quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc. (The paint to be used should be got approved by the engineer before use on work.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing and fixing P.V.C. Rainwater Downfall pipes of 110mm diametre with necessary shoes, bends and other speicals, clamps, screws, nails, teakwood plugs etc., complete including cost of all materials. The rate is to include cost of removable cast iron Gratings of appropriate size. The size of teakwood plugs to be used is 150mm * 25mm in front and 200mm * 75mm in rear and all other sides with a depth of 100mm. The pipe is to be fixed by means of "U" clamps at the cnetre of the pipe screwed to the plugs. The special type of 'U' clamps at the centre of the pipe to be fixed in addition to these for more than three metres pipe length, complete complying with standard specification.

Providing Cuddapah Slab 20/30mmthick

Supplying and fixing of RCC Jolly as per standard specification

Manufacturing,supplying and fixing of stainless steel hand rails for staircase using 50mm dia 304L grade stainless steel pipe of 1.6mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia stainless steel pipe post of 1mm thick as vertical at 900mm centre with 2 Nos of 25mm dia intermediate horizontal stainless steel pipe of 1.6mm thick in between.The vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete.The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance,electrical charges,ect.complete.

Light point & Fan point (SD:23)

Supply and 40W tube light (SD No.88)

Ceiling fan (SD No.107)

Supply of 11W CFL Bulb (SD :80)

Bulk head CFLfitting (SD No.83)

9W CFL twin Street Light (SD:94)

TNEB Meter board with Fuse unit (SD No.127)

Service line (SD No.67)

Service connection with 'GI' Pipe (SD No.69)

Plug Point (SD No.36)

Power Plug Point (SD No.40)

Supply and fixing 0f Exaust fan(SD No.118)

Supplying & Fixing in position of Indian type Water closet 580x440mm of approved quality including all cost and conveyance and all labour chargesetc., complete

Supplying & Fixing in position of colour European Water closet of approved quality including all charges

Supplying and Fixing inposition of best quality make White glazed wash basin of size 550x 400mm (without Pedestal)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying & Fixing of 110mm dia PVC pipes and specials for sanitary arrangements including all cost and conveyance and all labour chargesetc., complete (Below G.L)

Geophysical survey Charges 1. (E.E, TWAD,Erode Lr No: F.AHG /RWS/ Survey work /2015/ Dt: 09.09.2015) 2. ( Twad M.D Chennai. Lr No. 9087 / AHG7 / HG / 2007 / Dt : 12.08.2015 )

Supply of 150mm CS PVC Pipe for Casing Pipe etc. complete.

Drilling of 150mm Dia vertical bore in hard rock areas to be required depth. including cost of all. ( M.D, Twad board, chennai. Lr No : F15090/ AE /CM /TWAD/ 2013/ dated : 4.2018 )

Drilling of 150mm Dia bore well in hard rock areas.(18m to 150m)

Labour charges for inserting casing pipes assembly (With slot or without slot) in the drilled hole including joint etc., complete (Ref.TWAD SoR 2022-23)

Supply & delivery of 2.0H.P Submersible motor pump set (50 lpm x 60m) (Ref.TWAD SoR 2024-25)

Supply & delivery of 2.0HP Three phase Panel board

Supply and fixing of Bore well End cap with ISI mark etc complete 160mm (Ref.TWAD SoR 2022-23)

Supply and delivery of 40mm UPVC pipe

Supply and delivery of 2.5 Sq.mm Flat COPPER Cable (Single cable) (Ref.TWAD SoR 2022-23)

Supply and delivery of 50mm G.I pipe

Supply and delivery of 63mm 6ksc PVC pipe OHT to Syntax (Ref.TWAD SoR 2022-23)

Earthwork Excavation and depositing on bank with initial lead and lift in all types of soil PVC 63mm (Ref.TWAD SoR 2022-23)

Lowring 63mm 6KSC PVC pipes in proper slope and gradient as per standard speicfication (Ref.TWAD SoR 2022-23)

Refilling the trench after laying of pipe line as per standard speicfication

Supply and delivery of 40mm 10ksc PVC pipe (Ref.PWD SoR 2023-24) (Ref.TWAD SoR 2022-23)

Supply and fixing 2000lit sintex tank -

Supply and fixing of 25mm GI gate volve

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}18%

S.K.B Constructions (BID ID -1173415)