Procurement and installation of 4 Nos. 16 Mtr. High Mast tower light having 200 watt LED flood light in shivaji stadium, Model Town, Panipat.

Amount

Supply of the LED flood light of system wattage 200 watt, The fixture should be provided with 5 years warrenty including driver against manufacturing defect. Make: Phillips/Wipro/Crompton

SITC of DIN Type Astronomical Digital Time Switch with 1 CO: Astronomical programmable every 1 minute, backup of 6 years , 28 memory locations, currently capacity 16 Amp, with one changover, total 28 programs Make: Indo Asian/Havells/Crompton

Supply of 25 Sq mm 4 core armoured LT aluminium cable Make: Grandlay/Havells/POLYCAB/RR KABLE

Supply and erection of 10 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable Make: POLYCAB/RR KABLE/PLAZA

Supply and erection of 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable Make: POLYCAB/RR KABLE/PLAZA

Supply and erection of 10 kW, 3 phase 440 Volt Energy Meter as per the standards and specifications of Electricity Board. Note: Actual payment of the mater will be done as per the receipt recevied from Electricity Board

Design, fabricate and supply at site 16 mtr High mast pole (excluding the Ht. Of head frame ) with head frame of suitable size as per the design with either lantern carriage or caged ladder and platform with railing for maintenance of the Flood Lights along with all its Accessories, nut bolts etc. conforming to the Specification of the contract. High mast shall be of continuously tapered, polygonal cross section, minimum 8 sided, presenting a good and pleasing appreance, assured performance, and reliable service. The height of mast pole shall be at 16 m, with minimum across Flat dimensions of 200mm at the top. The plate thickness shall be 5 mm for bottom and 4 mm for top section and suitable for wind velocity as per IS 875 part 3. The 16 meter high mast shall be delivered either in two or maximum three two sections, and shall be joined together by slip stressed-fit metod at site. The minimum overlap distance shall be 1.5 times the diameter at penetration entire fabricated mast shall be hot dip-galvanized, internally and externally as per BS EN ISO 1461 having a uniform thickness of 65 microns. It shall also include accessories for high mast including head frame arrangement suitable for mounting 15 liminaries LED FLOOD LIGHT symmetrically. Suitable head frame as per the design for the required illumination across the designed illumination beam to be designed, fabricated and fixed over the pole. The tilt angle and curvature of the head frame to be designed so as to get the class II illumination of cricket ground as per SP 72 9 Refer including supply of foundation bolts manufactured from special steel min. 6.8 grade along with nuts, washers, anchor plate and templates (1 fitting per mast is necessary) as per specification and direction of the Engineer-in- charge. Bidder are requested to Quote for the Foundation bolts, Templates etc. separately in the specified row below. Providing Mild steel Templates suitable and matching with the PCD of the high nast pole fabricated with minimum 50*5 mm plate with Red oxide/ Zinc chromate antirust coating. Holes for the Bolts to be drilled/punched and grined properly so that even surface may be obtained for proper leveling of the bolts. Providing and fixing of Avitation obstruction light. Providing and fixing minimum 28 mm diameter minimum 850 mm long having minimum 6.8 grade bolts having anchor plate 8mm thick along with minimum 2 nos. galvanized nuts per bolt. The exposed portion of the bolts and nuts washers shall be hot dip galvanized and the embedded portion can be coated with anti- rust coating such as Zinc chromate/ red oxide. Providing and fixing timer switch for these mast lights. Make: Phillips/Crompton/Bajaj

Bidder Name

Amount

The Swachh Haryana Co op L/c multipurpose Society ltd(GSTN-06AAGAT8251P1ZT)

THE ROHINI COOP L&C SOCIETY LTD.(GSTN-NA)

THE ROHINI COOP L&C SOCIETY LTD.

The Swachh Haryana Co op L/c multipurpose Society ltd