Interior Renovation works of Computer Forensic Unit (CFU) office at 6th floor, CBI HQ, CGO Complex, New Delhi.

SUB-TOTAL AMOUNT 5694360.01 2592374.00

TOTAL AMOUNT INCLUDING GST (RS.) 8286734.00

12 11.49 Providing and laying Vitrified tiles in floor/Skirting (Match to existing at

site) with different sizes (thickness to be specified by the manufacturer),

with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid with

cement based high polymer modified quick set tile adhesive (water

based) conforming to IS : 15477, in average 6 mm thickness, including

grouting of joints (Payment for grouting of joints to be made separately).

S.No. DSR-2021 Description of item Unit Qty. Rate Amount

13 12.45 Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre

to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x

50mm long with 6mm dia bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I.

channels 45x15x0.9 mm running at the spacing of 1200 mm centre to

centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x

230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm

and 30 mm long, the perimeter of ceiling fixed to wall/partition with the

help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @

230 mm interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at

230 mm c/c, including jointing and finishing to a flush finish of tapered

and square edges of the board with recommended jointing compound ,

jointing tapes , finishing with jointing compound in 3 layers covering upto

150 mm on both sides of joint and two coats of primer suitable for board,

all as per manufacturer's specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the

cost of painting with :

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board Sqm. 10.00 1300.50 13005.00

14 13.80 Providing and applying white cement based putty of average thickness 1

mm, of approved brand and manufacturer, over the plastered wall surface

to prepare the surface even and smooth complete.

15 13.83 Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50 grams/

litre of approved brand and manufacture, including applying additional

coats wherever required to achieve even shade and colour.

16 13.116 Polishing in high gloss/matt finish melamine clear polish on wood work

in required color/wooden shade texture with following process in the

sequence as detailed below:

1 The surface to be polished is rubbed with sand paper 80/120 no. and then

with sand paper of 160/180 nos.

2 Applying two coats of sealer with spray gun and allowing sufficient drying

time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.

3 On drying of sealer coat, wet rubbing with emery cloth of finer grading

with ample water to remove excess sealer layer and make the surface

further smooth after this wet rubbing, then surface is applied with special

grade melamine fillers to fill all the small and big holes/grooves etc. Filler

coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing

is done this surface is further allowed to dry for 12 hrs.

4 On this, 1st coat of melamine polish is applied with spray gun using

melamine clear polish and melamine thinner in required proportion. This

1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet

rubbed smooth, which is further allowed to dry for 12 hrs. The final

melamine polish is applied with compressor pressure spray gun using

melamine clear polish and melamine thinner mixed in required proportion

complete as per direction of Engineer-in-Charge. (Final coat to be done in

1 or 2 layers without gap of time.) Sqm. 5.00 1156.55 5782.75

17 15.12 Dismantling doors, windows and clerestory windows (steel or wood)

shutter including chowkhats, architrave, holdfasts etc. complete and

stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below Each 2 302.70 605.40

18 15.13 Taking out doors, windows and clerestory window shutters (steel or

wood) including stacking within 50 metres lead :

15.13.2 Of area beyond 3 sq. Metres Each 1 155.75 155.75

19 15.23 Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm Sqm. 10.00 60.50 605.00

20 15.57 Dismantling aluminium/ Gypsum/ ply/ glass partitions, doors,

windows, fixed glazing and false ceiling including disposal of

unserviceable material and stacking of serviceable material with in 50

meters lead as directed by Engineer-in-charge. Sqm. 691.00 46.50 32131.50

21 26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of size

595X595mm of approved texture, design and pattern. The tiles should

have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%,

Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per

(BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-

Grid of hot dipped all round galvanized iron section of 0.33 mm thick

(galvanized @120 gsm) comprising of main T runners of 15x32 mm of

length 3000 mm, cross T of size 15x32mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length 600 mm to

form grid module of size 600x600 mm suspended from ceiling using

galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer

diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up

to 1000 mm length and L-shape level adjuster of size 85x25x2 mm,

spaced at 1200 mm centre to centre along main ‘T’.

S.No. DSR-2021 Description of item Unit Qty. Rate Amount

The system should rest on periphery walls /partitions with the help of GI

perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick

sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm

centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom

portion of all T-sections used in false ceiling support system shall be pre-

painted with polyester baked paint, for all heights. The work shall be

carried out as per specifications, drawings and as per directions of the

engineer-in-charge.

26.27.3 With 16 mm thick beveled tegular mineral fibre Antimicrobial false

ceiling tile confirming to ISO 5 (class 100) specifications Sqm. 374.00 2189.55 818891.70

(II) NON - SCHEDULE ITEMS

22 NS-1 Providing and fixing 12 mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing and

fixing top & bottom pivot & double action hydraulic floor spring type fixing

arrangement, Door handle, lock and stopper etc and making necessary

holes etc. for fixing required door fittings, all complete as per direction of

Engineer-incharge. Sqm. 30.00 9513.00 285390.00

23 NS-2 Providing and fixing in position glazed partition with 12mm thick clear

toughened glass fixed with top & bottom in Aluminium 'U' channel to

existing RCC slab/floor/wall. The vertical joint of glass shall be polished

and butt joint, filled with clear silicon sealant including required other

hardwares. The vendor should ensure stability of partition complete in all

respects as shown in the detailed drawing or as directed by the Enigineer-

in-charge. The Cost of wooden frame/ M.S. framefrom ceiling to slab

shall be paid in basic item. (Measurement of partition shall be taken up to

clear ceiling height) Sqm. 94.00 6537.00 614478.00

24 NS-3 Providing and fixing in position 3M make film of approved colour,

design & texture over glass wherever required complete in all respects

as shown in the deatiled drawing and as directed by Engineer-in-charge.

The film should be fixed by 3M company representative only.

TOTAL NSR 1094193.00

TOTAL Civil works (DSR + NSR) 2658613.31

Interior/ Renovation works of Computer Forensic Unit (CFU) office at 6th floor, CBI-HQ, CGO Complex, New

Sr. No DSR Code Item Description Delhi. Unit Qty Rate -

Variable Refrigerant Flow Air-conditioning System

1 DSR. No. Outdoor Units

DSR - 1 Supply ,Installation,Testing & Commissioning of modular HP 22 16,415 361,130

type Variable Refrigerant Flow/ Variable Refrigerant Volume

air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll

Compressor(s) , minimum two compressors for above 14HP

modules, microprocessor based Controller, top discharge

type condensing unit(s), with R410A Refrigerant,vibration

isolators, with suitable foundation etc.complete as required.

The unit shall deliver the rated capacity at AHRI Conditions

and work even at 50°C ambient temperature without

tripping. The unit shall be suitable to work on 400V+/-10%,

3Phase, 50HzAC power supply. The unit shall be filled with

first charge of the refrigerant andready for use as required.

The COP at AHRI conditions shall not be less than 3.1 and

IEER not less than 6.5 .

Indoor Units - Casstte Units -

DSR - 2 Supply, installation, testing and commissioning of following -

minimum capacity 4-way flow VRV/VRF Cassette Type

Indoor ceiling mounted unit equipped with synthetic

washable media pre-filter, fansection with low noise fan/

dynamically balanced blower,multi speed motor,coil section

with DX Copper coil,electronic expansion valve,outer

cabinet, drain pump, grill, necessary supports,vibration

isolation, cordless remote control etc., suitable for operation

on single phase 230V ± 10%,50Hz AC supply, complete, as

required.The unit shall have automatic force shut down

provision incase offire on receiving signal from BMS

System.Thecooling capacity of indoor unit will be at airinlet

conditions of 27 DegreeC D Band 19 Degree CWB

Copper Refrigerant Piping -

Sr. No DSR Code Item Description Unit Qty Rate -

DSR - 5 Supply,Installation,testing and commissioning including -

vaccumiazation and Nitrogen testing of following nominal

sizes of soft/hard drawn copper refrigerant piping for

VRV/VRF or Non VRV/VRF system, complete with

fittings,with suitable adjustable ring type hanger supports,

jointing/brazing including accessories,insulated with XPLE

Class-O tubular insulation/withClass-O closed cell

elastometric nitrile rubber tubular sleeves sections of

specified thickness as given below for Suction and Liquid

lines,all accessories as per specifications

NOTE:-1)The Copper Piping & Piping Circuit should be with -

Minimum Number of joints, which shall be attained by : (i)

Using One End Expanded Tubes (ii) Bending the tubes

instead of using elbow joints wherever 90 degree bending is

required. (2)Piping should be routed at site in such a

manner, that brazed joints in the refrigeration piping are kept

to a minimum. (3) The makes of tube fittings shall be same

as that of tubes.(4) The thickness of fittings used shall be

same as that of the pipe.

5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm M 60 245 14,715

with 19 mm thick insulation

5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm M 1 331 331

with 19 mm thick insulation

5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm M 72 466 33,552

with 19 mm thick insulation

5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm M 45 588 26,460

with 19 mm thick insulation

5.5 19.0 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm M 1 707 707

with 19 mm thick insulation

5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm M 1 865 865

with 19 mm thick insulation

5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm M 1 1,022 1,022

with 19 mm thick insulation

5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 M 45 1,108 49,860

mm with 19 mm thick insulation

DRAIN PIPING -

DSR - 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) -

pipes,having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step PVCsolventcement

and testing of joints complete as per direction of Engineer in

18.7.3 25 MM Nominal Outerdia Pipes M 90 408.55 36,770

18.7.4 32 MM Nominal Outerdia Pipes M 50 501 25,048

Insulation material for Drain Pipe -

DSR (E & M)- Supplying, laying, fixing, testing and commissioning of -

following thickness closed cell elastrometric nitrile rubber of

class 'O' applied by suiatable adhesive, as per specifications

16.5 and as required complete in all respect.

Total 1,134,584

Interior/ Renovation works of Computer Forensic Unit (CFU) office at 6th floor, CBI-HQ, CGO Complex, New

Sr. No Item Description Unit Qty Rate (INR) Amount(INR)

Variable Refrigerant Flow Air-conditioning System

1 Indoor Units - 100% Outdoor Air processing Unit

Supply, installation, testing and commissioning of VRV/VRF Single

skinned made out by Galvanised steel plate (As manufacturer

standard) ceiling suspended Duct Type Outdoor air processing Unit

equipped with synthetic washable media pre-filter, fansection with

low noise fan/ dynamically balanced blower,multi speed motor,coil

section with DX Copper coil,electronic expansion valve,outer

cabinet, drain pump, grill, necessary supports,vibration isolation,

cordless remote control etc., suitable for operation on single phase

230V ± 10%,50Hz AC supply, complete, as required.The unit shall

have automatic force shut down provision incase offire on receiving

signal from BMS System.Thecooling capacity of indoor unit will be at

airinlet conditions of 27 DegreeC D Band 19 Degree CWB

600 CFM / 4 RD Cooling coil / 4.5 TR Each 1 63,939 63,939

2 Supply of Main Central Remote controller system with LCD panel Set 1 73,776 73,776

suitable for above indoor units to operate, monitor, on/off,

temperature setting etc.

3.0 Electrical Panel for ODU -

Supply, Installation, testing & commissioning of Indoor Type IP 42 -

Cubical type main MV panel board suitable for 3 phase, 415 volts,

50 Hz and of 25 KA rupturing capacity at 415 volts, fabricated from

minimum 2 mm thick and doors of 1.6 mm thick CRCA sheet

powder coated through Ten tank process facility for prickling and

degreasing complete with mountings, interconnections, earthing etc

including mechanical and Electrical Inter locking as required.

TOTAL AMOUNT INCLUDING GST (RS.) -

TOTAL AMOUNT INCLUDING GST (RS.) -

Potential free contact shall be provided with necessary modbus -

protocol compatible to BMS and energy management system.

01 No. 63 AMP MCB TP + NL 25 KA incoming Micro inbuilt O/L, -

1 No. Digital VAF meter and CTs of rating 63/5A. -

3 Nos.phase indicating lamps. -

Main bus bar rated at 100 amps TPN, 36 KA with heat shrinkable -

sleeve and shall be of aluminium.

01 No. 63 A TP MCCB-25KA Micro inbuilt O/L, S/C, E/F For VRF -

All outgoing feeder shall have following accessories. -

02 Nos. ON/OFF indicating lights with protection switch. -

1 No.125 A MCCB as spare Set 1 41,708 41,708

4 Supply of XLPE Insulated Al / Cu conductor Ar. Cable. -

Sr. No Item Description Unit Qty Rate (INR) Amount(INR)

Supply Receiving, loading & unloading at site, Laying, Fixing, -

Testing & Commissioning of following sizes of 1.1kV grade XLPE

insulated, PVC type ST-2 inner & outer sheath, FRLS,

Aluminum / CU conductor, Armoured / Unarmoured cables as per

IS:7098 Part-I on existing cable trays / in existing hume pipes /

PVC pipes / GI pipes / on surface of slabs, walls or masonry /

RCC trenches / ducts including cables ties, GI saddles, clamps

and necessary hard ware.

4 C x 10 sq.mm. Cu. Ar. XLPE cable RM 20 305 6,100

5 Supply,laying,testing and commissioning of following copper PVC -

insulated, sheathed flexible cable for indoor unit/inline fans.Cabling

between 6/16 amp Switch socket outlet and each of the indoor units

(splits/ ductables / fans /etc..) alongwith plug top at socket outlet

6 Supply & Laying ,testing and commissioning of control cum -

transmission wiring of Copper conductor shielded cable for

looping between indoor & outdoor VRF system & to main Central

remote controller system

7 Supply & Fixing of Cable end Termination of following sizes 1.1 kV -

grade XLPE insulated, PVC type ST-2 inner & outer sheath, FRLS,

Aluminium / CU conductor, Armoured/ Unarmoured cables as per

IS:7098 Part-I including cost of tinned copper, heavy duty crimpping

lugs, double compression glands, insulation tape and all

necessary material to complete the termination.

4 C x 10 sq.mm. Cu. Ar. XLPE cable Set 2 315 630

8 Hot Dip Galvanised Cable Tray for Copper Piping & Cabling -

Supply, fabrication and installation of Hot dip galvanised factory built -

perforated type double banded cable trays complete with all

bends, tees, elbows, reducers, supports & fixing arrangement etc.

of various widths in single tier/two tier/ three tier/ five tier fashion

either on one side of the wall or on two sides of the wall or

ceiling/wall/floor. (All bends & tees shall be of factory built of

same make as that of tray). Cable tray supports are supposed

to be included in the rate of the trays. Nothing extra to be paid for

cable tray supports. Cable trays and supports shall be as per

specifications.

100 x 50mm x 50mm x 2mm thick RMT 25 630 15,750

50 x 50mm x 50mm x 2mm thick RMT 10 512 5,120

9 Earthing Strip / Wires. -

Supply & installation, testing and commissioning of following sizes -

of GI strip/wire clamped to walls or in exsiting cable trays/raceways

etc for equipment earthing complete as required including inter

connection between length at joints, all fixing accessories,

saddles, clamps and other fixing hardware material as required for

proper installation.

8SWG copper wire RMT 50 315 15,750

Interior/ Renovation works of Computer Forensic Unit (CFU) office at 6th floor, CBI-HQ, CGO Complex, New Delhi.

ELECTRICAL WORKS

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

SUBHEAD-I BASED ON DSR - 2018.

WRING IN STEEL CONDUIT

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable in surface / recessed steel conduit, with modular

switch, modular plate, suitable GI box and earthing the point with

1.5 sq.mm FRLS PVC insulated copper conductor single core

cable etc. as required.

Wiring for twin control light point with 1.5 sqmm FRLS PVC

insulated copper conductor single core cable in surface/ recessed

2 1.4 steel conduits, 2 way modular switch, modular plate, suitable GI Pts 5 1,290.00 6,450.00

box and earthing the point with 1.5 sqmm FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed steel

conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the

4 1.7 following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed steel conduit as required.

4.3 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Meter 250 263.00 65,750.00

4.4 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Meter 100 356.00 35,600.00

4.8 1.7.8 4 X 4 sq. mm + 2 X 4 sq. mm earth wire Meter 100 406.00 40,600.00

4.9 1.7.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Meter 50 529.00 26,450.00

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

Supplying and drawing following pair 0.5 mm dia FRLS PVC

insulated annealed copper conductor, unarmored telephone

cable in the existing surface/ recessed steel/ PVC conduit as

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

copper braid and protected with PVC sheath in the existing

surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of steel conduit alongwith

the accessories in surface/recess including painting in case of

surface conduit or cutting the wall and making good the same in

case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the

8 1.24 existing modular plate & switch box including connections but

excluding modular plate etc. as required.

8.4 1.24.4 3 pin 5/6 A socket outlet Each 5 111.00 555.00

8.5 1.24.5 6 pin 15/16 A socket outlet Each 5 175.00 875.00

8.6 1.24.6 Telephone socket outlet. Each 35 119.00 4,165.00

8.7 1.24.7 TV antenna socket outlet. Each 2 119.00 238.00

Supplying and fixing two module stepped type electronic fan

9 1.25 regulator on the existing modular plate switch box including Each 1 342.00 342.00

connections but excluding modular plate etc. as required.

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

Supplying and fixing modular blanking plate on the existing

modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith

11 1.27 modular base & cover plate for modular switches in recess etc. as

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess including providing and

12 1.31 fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps Each 60 401.00 24,060.00

modular switch, connections, etc. as required.(for ligt plugs to be

used in no residental building)

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess including providing and

fixing 6 pin 5/6 &15/16 amps modular socket outlet and 15/16

amps modular switch, connections, etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing

14 1.33 junction box/ wooden block including connections etc. as Each 100 65.00 6,500.00

Wiring for group controlled (looped) light point/fan point/exhaust

fan point/ call bell point (without independent switch etc.) with 1.5

sq. mm FRLS PVC insulated copper conductor single core cable

in surface/ recessed steel conduit, and earthing the point with 1.5

sq. mm FRLS PVC insulated copper conductor single core cable

etc. as required.

Supplying & fixing suitable size GI box wih modular plate and

cover in front on surface or in recess including providing and

fixing 25 A modular socket outlet and 25 A modular SP MCB, "C"

curve including connections, painting etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess

17 2.16 along with 25/32 A 240 V "C" curve DP MCB complete with Each 2 848.00 1,696.00

connections, testing and commissioning etc. as required.

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

Supplying and fixing TP sheet steel enclosure on surface/ recess

18 2.17 along with 16/25/32 A 415 V "C" curve TP MCB complete with Each 2 1,146.00 2,292.00

connections, testing and commissioning etc. as required.

Supplying and Fixing 20 A 240 V, SPN industrial type socket

outlet, with 2 pole and earth, metal enclosed plug top along with

20 amps "C" curve , SP, MCB, in sheet steel enclosure, on

surface or in recess with chained metal cover for the socket outlet

and complete with connection, testing and commissioning etc. as

Supplying and fixing 20 A, 415 V, TPN Industrial type socket

outlet, with 4 pole and earth, metal enclosed plug top alongwith

20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in

recess, with chained metal cover for the socket out let and

complete with connections, testing and commissioning etc. as

Supplying and Fixing 30 amps, 415 volts, TPN industrial type

socket outlet, with 4 pole and earth, metal enclosed plug top

along with 30 amps "C" curve, TP MCB, in sheet steel enclosure

on surface or in recess with chained metal cover for the socket

outlet and complete with connection, testing and commissioning

etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in single red

colour on front side as required.

Supplying,installation,testing an d commissioning of Passive

Infrared (PIR) technology based occupancy sensor having high

preformance, non regulating programmable type, suitable for

23 15.1 connected load upto 10 Amp , for mounting height up to 2.8 mtr Each 10 4,538.00 45,380.00

and for 5 m diameter coverage area along with necessary fixing

arrangements i/c programming at site etc. complete as

Supplying,installation,testing and commissioning of Microwave

technology based occupancy sensor having high preformance,

non regulating programmable type, suitable for connected load

upto 10 Amp , for mounting height up to 2.6 mtr and for 5m X

20m coverage area along with necessary fixing arrangements i/c

programming at site etc. complete as required.

Supplying and fixing following way, single pole and neutral, sheet

steel, MCB distribution board, 240 V, on surface/ recess,

25 2.3 complete with tinned copper bus bar, neutral bus bar, earth bar,

din bar, interconnections, powder painted including earthing etc.

as required. (But without CB/RCCB/Isolator)

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

Supplying and fixing following way, horizontal type three pole and

neutral, sheet steel, MCB distribution board, 415 V, on surface/

26 2.4 recess, complete with tinned copper bus bar, neutral bus bar,

earth bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

27.2 2.10.2 Single pole and neutral. Each 1 544.00 544.00

27.5 2.10.5 Triple pole and neutral. Each 10 1,092.00 10,920.00

Supplying and fixing single pole blanking plate in the existing

MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, (single phase

and neutral), 240 V, residual current circuit breaker (RCCB),

29 2.14 having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

Supplying and fixing DP sheet steel enclosure on surface/ recess

30 2.16 along with 25/32 A 240 V "C" curve DP MCB complete with Each 1 848.00 848.00

connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess

31 2.17 along with 16/25/32 A 415 V "C" curve TP MCB complete with Each 1 1,146.00 1,146.00

connections, testing and commissioning etc. as required.

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket

outlet, with 2 pole and earth, metal enclosed plug top alongwith

20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or

in recess, with chained metal cover for the socket out let and

complete with connections, testing and commissioning etc. as

Supplying and fixing 20 A, 415 V, TPN Industrial type socket

outlet, with 4 pole and earth, metal enclosed plug top alongwith

20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in

recess, with chained metal cover for the socket out let and

complete with connections, testing and commissioning etc. as

Supplying and fixing 30 A, 415 V, TPN Industrial type socket

outlet, with 4 pole and earth, metal enclosed plug top alongwith

30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in

recess, with chained metal cover for the socket out let and

complete with connections, testing and commissioning etc. as

Providing and fixing M.V. danger notice plate of 200 mm X 150

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in single red

colour on front side as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for

following single pole and neutral, sheet steel, MCB distribution

board, 240 Volts, on surface/ recess, complete with testing and

commissioning etc. as required.

36.1 2.23.1 For 6 way, Double door SPN MCBDB Each 5 629.00 3,145.00

36.2 2.23.2 For 8 way, Double door SPN MCBDB Each 3 731.00 2,193.00

36.3 2.23.3 For 10 way, Double door SPN MCBDB Each 7 746.00 5,222.00

36.4 2.23.4 For 14 way, Double door SPN MCBDB Each 1 864.00 864.00

Supplying and fixing call bell/ buzzer suitable for single phase,

230 V, complete as required.

Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat

flexible, FRLS PVC insulated, copper conductor cable, in PVC

sleeve of suitable size on the floor/ wall, or side of the table/ door

etc. as required.

Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular

39 1.40 flexible FRLS PVC insulated, PVC sheathed copper conductor Meter 500 21.00 10,500.00

cable direct on the wall with PVC clips etc. as required.

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

Installation, testing and commissioning of pre-wired, fluorescent

fitting / compact fluorescent fitting of all types, complete with all

40 1.41 accessories and tube/lamp etc. directly on ceiling/ wall, including Each 125 168.00 21,000.00

connections with 1.5 sq. mm FRLS PVC insulated, copper

conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent

fitting / compact fluorescent fitting of all types, complete with all

accessories and tube/lamp etc., including supplying and fixing

ball and socket arrangement, 2 Nos. down rods of 20 mm dia X

1.6 mm thick steel conduit upto 30 cm length, painting and wiring

the down rods and connections with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable and earthing etc.

Providing and fixing extra conduit down rod of 20 mm dia, 2 X 10

cm length, wiring with 2 X 1.5 sq. mm FRLS PVC insulated,

copper conductor, single core cable including painting etc. as

(Note : More than 5 cm length shall be rounded to the nearest 10

cm and 5 cm or less shall be ignored)

Installation, testing and commissioning of ceiling fan, including

wiring the down rods of standard length (upto 30 cm) with 1.5 sq.

mm FRLS PVC insulated, copper conductor, single core cable

etc. as required.

Installation, testing and commissioning of ceiling fan, including

wiring the down rods of standard length (upto 30 cm) with 1.5 sq.

44 1.45 mm FRLS PVC insulated, copper conductor, single core cable, Each 2 203.00 406.00

including providing and fixing phenolic laminated sheet cover on

the fan box etc. as required.

Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15

mm dia, heavy gauge including painting etc. as required. (Note :

More than 5 cm length shall be rounded to the nearest 10 cm and

5 cm or less shall be ignored)

Supplying and fixing extra conduit down rod of 20 cm length G.I.

pipe 15 mm dia, heavy gauge including painting etc. as required.

(Note : More than 5 cm length shall be rounded to the nearest 10

cm and 5 cm or less shall be ignored)

Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as

Installation of exhaust fan in the existing opening, including

48 1.50 making good the damage, connection, testing, commissioning

etc. as required.

Extra for fixing the louvers/ shutters complete with frame for a

exhaust fan of all sizes

Painting of ceiling fan in installed position with one or more coats

of spray painting with synthetic enamel paint of approved brand

and manufacture to give an even shade, including cleaning of

surface with detergent etc. as required.

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface/ recessed Steel/ PVC conduit as required.

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providng and

52 1.56 fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A Each 5 582.00 2,910.00

modular switch, connections etc. as required. (For light plugs to

be used in non residential buildings).

Supplying & fixing suitable size GI box wih modular plate and

cover in front on surface or in recess including providing and

fixing 25 A modular socket outlet and 25 A modular SP MCB, "C"

curve including connections, painting etc. as required.

Supplying, installation, testing & commissioning of intelligent

54 17.2.4 analog addressable photothermal detector complete with Each 40 2,846.00 113,840.00

mounting base complete as required.

Supplying, installation, testing & commissioning of response

55 17.2.5 indicator on surface/recessed MS Box having two LED, metallic Each 40 263.00 10,520.00

cover complete with all connections etc as required.

Supplying, installation, testing & commisssioning of intelligent

addressable programmable sounder complete as required.

Supplying, installation, testing & commissioning of fault isolator

complete with base as required.

Supplying, installation, testing & commissioning of intelligent

58 17.2.9 addressable thermal detector with rate of rise cum fixed Each 1 2,713.00 2,713.00

tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable

fire control module complete as required

Supplying, installation, testing & commissioning of addressable

phone control module complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W

metal box ceiling/wall speakers complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,

600/1000V rated with annealed copper conductor having XLPE

insulation, steel wire armouring & FRLS outer sheath complete as

Supplying and drawing of cable Fire Retardant PVC insulated

copper conductor cable in the existing surface / recessed steel

conduit of following pairs, cores and size including connections

and interconnections etc. as required.

63.1 17.5.3.1 Speaker cable Single pair, 2-core, 1.5 sqmm Meter 1000 51.00 51,000.00

63.2 17.5.3.2 Speaker cable Two pair, 2-core, 1.5 sqmm Meter 150 85.00 12,750.00

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

Supplying, installation, testing & commissioning of digital audio

64 17.3.7 amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply Each 1 145,780.00 145,780.00

complete as required.

Supplying, installation, testing & commissioning of addressable

horn cum strobe complete as required.

Supplying, installation, testing & commissioning of addressable

strobe complete as required.

Supplying and installing following size of perforated painted with

powder coating M.S. cable trays with perforation not more than

67 4.1 17.5%, in convenient sections, joined with connectors, suspended

from the ceiling with M.S. suspenders including bolts & nuts,

painting suspenders etc as required.

67.1 4.1.1 100 mm width X 50 mm depth X 1.6 mm thickness Meter 50 476.00 23,800.00

67.2 4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Meter 50 531.00 26,550.00

Subtotal for Subhead-I. 2,995,356.00

SUBHEAD-II BASED ON MARKET RATE ITEMS.

Supply, Unloading, Receiving, Storing, Assembling, Fixing,

Termination, Testing and Commissioning of the following Type

LED Lighting Fixtures with all fitting, driver, housing & reflector,

wiring complete with providing of all necessary hardware’s like

1 MR-1 raw plugs, hangers, support plates as required for fixing etc.

Complete in all respect.

All toll & tackles, Hardware, required for successful installation,

testing & commissioning shall be in scope.

Recessed type LED 2x2 luminaire with CRCA housing suitable

with fully diffused prismatic diffuser for general lighting in office

areas. The luminaire should have a color consistency SDCM < 5,

CRI > 80 and CCT of both 4000K. The luminaire shall be

compliant with IP20 and IK02 classification. Luminaire shall be

designed to emit at least 4000 nominal lumens and an

outstanding backlit solution efficacy of at least 124 lumen/watt

and maximum system wattage of 32W. The luminaire shall be

designed so as to ensure lumen depreciation of up to 30% over

50k burning hours @ design ambient temp 45 deg C. The

electronic driver used shall have a power factor >0.95 and THD

<10% The fixture should comply with the parameters as per

IS10322. Similar to RC380B LED42S-4000 G5 L60W60 PSU OD

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

IP20 Recessed LED Downlighter made of pressure die cast

aluminum housing, Fixture should have minimum efficacy at

System level (Not Chip Level) >=110lumens/watt with Minimum

system Lumens 2000 with maximum system wattage of 18W. Life

of fixture (Including Driver) : 50000 burning Hrs. @ L70B50

Lumen maintenance, CCT of 6500K (SDCM<5), CRI >80, PF

>0.95, working temp range - 0°C < Ta < 45°C, and operating

Voltage Range of 130 - 320 VAC. it should has a Minimum

Internal Surge Protection of 2.5KV. Electronic Switchable ballast.

The fixture design should comply with EMC / EMI compliance

along with BIS certification for LED Driver & Luminaire.Luminaire

manufacture shall provide LM79report from NABL accredited lab

& LM80 report issued by LED manufacturer. BIS approved with

R-Code, Similar to DN296B LED20S PSU WH

Supply of following sizes of 1.1kV grade XLPE insulated, PVC

2 MR-2 type ST-2 inner & outer sheath, FRLS, Aluminium / CU

conductor, Armoured / Unarmoured cables as per IS:7098 Part-I.

2.1 3.5 Cores. (FRLS Cable)

Receiving, loading & unloading at site, Laying, Fixing, Testing &

Commissioning of following sizes of 1.1kV grade XLPE

insulated, PVC type ST-2 inner & outer sheath, FRLS,

Aluminum / CU conductor, Armoured / Unarmoured cables as

per IS:7098 Part-I on existing cable trays / in existing hume

pipes / PVC pipes / GI pipes / on surface of slabs, walls or

masonry / RCC trenches / ducts including cables ties, GI

saddles, clamps and necessary hard ware.

Cable end Termination of following sizes 1.1 kV grade XLPE

insulated, PVC type ST-2 inner & outer sheath, FRLS, Aluminium

/ CU conductor, Armoured/ Unarmoured cables as per IS:7098

Part-I including cost of tinned copper, heavy duty crimpping

lugs, double compression glands, insulation tape and all

necessary material to complete the termination.

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

Supply, Unloading, Receiving, Storing, Assembling, Fixing,

Testing and Commissioning of Single sided exit sign board for

wall / ceiling / pendant cantilever mounting, with white housing,

Red stencil & Battery backup capability and dual power supply

(AC/DC) and push to test switch for mandated code compliance

5 MR-5 testing, including long life SMF rechargeable Ni Cd battery and Each 10 4,500.00 45,000.00

internal solid-state transfer switch automatically connects the

internal battery to LED board for minimum 90 minute emergency

illumination. Fully automatic solid-state, two-rate charger initiates

battery charging to recharge a discharged battery in 24 hours.

Complete in all respect.

Supply Installation Testing & Commissioning of Intelligent 4 Door

4 Reader, TCP i/p Controller in powder coated MS housing on-

board buffer memory of up to 50000 transaction and should have

cardholder database of Minimum 2,40,000 per controller, with

Secured OSDP, IPv4 & IPv6, with on board support for the

storage of biometric templates. The controller should be

intelligent to take decision in offline mode when communication

link is not available On-board Ethernet 10/100Base-T port,

Firmware stored in flash memory, background download of

firmware updates supported, Supports up to 3 different formats,

6 MR-6 Enhanced anti-pass back capabilities, Up to 32 access level, 180 Set 1 102,111.00 102,111.00

holidays with grouping, 255 time zones, each with flash memory,

Individual extended held open and strike times (ADA required),

status LEDs, dedicated inputs for tamper, AC Fail and low battery

status, Advanced Encryption Standard (AES) 128-bit algorithm for

communications. UL-294 certified. Above controller box fitted with

all allied devices with termination link shall be housed in Power

Coated CRCA enclosure of IP-54 rating, made out of 2 MM thick

CRCA Sheet with lock arrangement, including UL listed power

supply, all necessary accessories, civil, electrical works &

peripheral items, as required.

Supply Installation Testing & Commissioning of Contactless

Smart card reader (OSDP) 13.56 MHz (Life Time warranty -till the

time readers are used by client) alongwith SS finish finished face

plate for reader. (UL).

8 MR-8 Supply of access control smart cards Set 50 191.00 9,550.00

Providing and fixing of Electromagnetic Locks for Single Leaf

Door (Fail Safe Type) of 600 LBS holding force including door

ajar alarm buzzer facility, with Status LED and Feedback Sensor,

9 MR-9 self alignment armature plate pivot, dual voltage incoming Set 3 4,467.00 13,401.00

selectable DC supply, mounting bracket (L/C/Z/U etc.) / filler etc.

and required power supply. Complete in all respect. Proposed

Electromagnetic Locks shall be of UL listed.

S No. DSR - 2018 Description. Unit. Qty. Rate. Amount.

Providing and fixing of Electromagnetic Locks for Double Leaf

Door (Fail Safe Type) of 600 LBS holding force including door

ajar alarm buzzer facility, with Status LED and Feedback Sensor,

10 MR-10 self alignment armature plate pivot, dual voltage incoming Set 3 6,637.00 19,911.00

selectable DC supply, mounting bracket (L/C/Z/U etc.) / filler etc.

and required power supply. Complete in all respect. Proposed

Electromagnetic Locks shall be of UL listed.

Providing and fixing of push button for Door Release, SS Finish,

suitable for Single back Box (back box supplied by others) &

fixing hardware etc. The Push button panel shall be fabricated

from 304 Stainless steel. Complete in all respect.

Providing and fixing of Emergency Break Glass to Exit for Door

12 MR-12 Release, (back box supplied by others) & fixing hardware, power Set 3 1,085.00 3,255.00

supply etc. Complete in all respect.

Supply installation testing& commissioning of access control web

based enterprise software to support readers,system

adminitration,Alarm Monitoring unlimited clients, Unlimited User

13 MR-13 logins,Data import/export from any ODBC compliant format such Set 3 52,332.00 156,996.00

as text, MS SQL. Integration with third party software.

The Software developed under ISO 9001 and ISO 27001 certified

processes and VAPT certified.

Supply, Installation, Ternination, Testing & Commissioning of 4

Core 0.75 Sqmm, PVC Insulated, PVC sheathed ATC conductor

multistranded, Unarmored shielded cable for signal (Reader to

Supply, Installation, Ternination, Testing & Commissioning of 4

Core 0.75 Sqmm, PVC Insulated, PVC sheathed ATC conductor

multistranded, Unarmored shielded cable for signal (Controller to

Supply, Installation, Ternination, Testing & Commissioning of 2

Core 0.75 Sqmm, PVC Insulated, PVC Unsheathed ATC

conductor multistranded, Unarmored unshielded cable for

signal(Exit Push Button , EBG to Controller).

Subtotal for Subhead-II. 1,245,045.00

Grand Total (Subhead-I DSR + Subhead-II MR) 4,240,401.00

Grand Total (Subhead-I DSR + Subhead-II MR) 4,240,401.00