REPAIR TO STEEL/WOODEN FURNITUTE OF DGQA AT FURNITURE YARD AT FW UNDER GE (C) KOLKATA

Amount

Note:- Removal of following existing unserviceable steel/wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,welding, glueing, providing hinges & denting,applying putty to level the surface, placing every part in-tact and painting the disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. Top shall be 18 mm thick exterior grade pre-laminated Particle board one side laminated in light Wallnut shade or as approved by BSO/GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Make of Particle board : Century/Archid /Green/Actiontesa.All kind of work will be executed where the furniture exist in different User Units of GE(Central) including BSO's Furniture Yard at Fort William, and office hours only as directed by Engineer-in-Charge.(Note applicable for item Srl No-1.01 to 16.10).

Sofa set 4 seater FD-281:- Leg as per drg.

Arm as per drg.

Wooden batten as per drg.

Bearer as per drg.

Taking out old pressed /torn old cushions from Nos set and Supply 40 density thick foam cushion of size 21”x22”x4” duly fxed with the GM fabric as approved by GE.Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting.(Make of Cushion-kurlon Gold line).

M&L for french polish with high gloss finish in light walnut shade after properly cleaned and smoothened the surface by scratching the entire wooden pallets, filling putty to the bore holes where ever required

Table 900x600 mm without drawer FD-284:- Top

Legs as per drg.

Long Rails as per drg.

Short Rails as per drg.

Leg Stiffener as per drg.

As per item no 1.06 but for Table 900x600 mm without drawer

Rubber Shoes as per drg.

Table 900x600 mm with drawer FD-283:- Top

Legs as per drg.

Long Rails as per drg.

Short Rails as per drg.

Leg Stiffener as per drg.

Drawer as per drg.

As per item no 1.06 but for Table 900x600 mm with drawer

Rubber Shoes as per drg.

Table office clerk steel FD-1004 :- Top

Long rails as per drg

Short rails as per drg

Legs as per drg

Legs stiffner

Drawers as per drg.

Painting of steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper.

Rubber Shoes as per drg.

Table office officer Steel FD-1003 Top

Long rails as per drg

Short rails as per drg

Legs as per drg

shutter as per drg

Drawers as per drg.

As per item no 4.07 but for Table office officer steel

Rubber Shoes as per drg.

Table dressing gents with mirror FD-230:- Back as per drg.

Top as per drg.

Bottom as per drg.

Drawers as per drg.

Looking mirror of size 380 x 760 mm and 5 mm thick .Make-Saint gobain ,Modi Float, Triveni Float Glass

As per item no 1.06 but for Table dressing gents with mirror

Chair CB With arms Wooden DB-3982:- Back rest as per drg.

Front Legs as per drg.

Rear Legs as per drg.

arms as per drg,

Legs Stiffer as per drg.

rails as per drg.

As per item no 1.06 but for Chair CB with arms

Removing the existing unserviceable cane plastic from the chair and Recanning the chairs by true Godrej pattern with plastic cane 2mm to 2.5mm wide, white colour, quality as approved by GE all as specified and as shown on drgs.

Rubber Caps as per drg.

Rubber Shoes as per drg.

Chair CB Without arms Wooden DB-3982:- Back rest as per drg.

Front Legs as per drg.

Rear Legs as per drg.

Legs Stiffer

rails as per drg.

As per item no 1.06 but for Chair CB without arms

As per item No. 7.08 but for Chair CB without arms

Rubber Caps as per drg.

Rubber Shoes as per drg.

Chair CB steel with arms FD-75 (M):- Supply & fixing of new seat and back as per drawing,Caning of seat and back shall be in godrej pattern.

Repair & Replacement of Arm rest shall be made of teak wood & size as per drg.

Repair of stiffner under seat and back as per drg.

Rubber Shoes as per drg.

Painting of steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper.

Rubber cap as per drg

Chair CB steel without arms FD-75 (M):- Supply & fixing of new seat and back as per drawing,Caning of seat and back shall be in godrej pattern.

Repair of stiffner under seat and back as per drg.

Rubber cap as per drg

Rubber Shoes as per drg.

Painting as per item no - 9.05 but for Chair CB steel without arms.

Chair revolving (TP) :- Replacement of pedestal assembly of chair Computer same as shown on drgs /existing in chair.

Replacement of hydraulic hieght adjustment base assembly of chairs Computer same as shown on drgs /existing in chair.

Replacement of new arms with polyurethane reinforced with MS insert arms as shown on drgs /existing in chair.

Removing the old torn/damaged tapestry cloth/rexine from the seat of the chair and providing the same with tapestry/rexine over a layer of foam(75mm thick,40 density) as shown on drgs /existing in chair. Colour 7 shade of tapestry cloth as approved by BSO/GE.

Removing the old torn/damaged tapestry cloth/rexine from the back of the chair and providing the same with tapestry/rexine over a layer of foam(75mm thick,40 density) as shown on drgs /existing in chair. Colour & shade of tapestry cloth as approved by BSO/GE.

Almirah small steel:-FD-1032:- 3-Way locking system as per drg.

Lock as per existing pattern and shape. Make-Harrison,Godrej

CP Handle as approved by BSO/GE irrespective of what is shown on drg.

Leg as per drg.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf, making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Supply & Fixing of new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges.

Painting of Almirah small steel as per Note.

Almirah large steel:- FD-1031:- 3-Way locking system for almirah large as per drg.

Lock as per existing pattern and shape. Make-Harrison,Godrej

CP Handle as approved by BSO/GE irrespective of what is shown on drg.

Leg as per drg.

Repairs to dented door by removing the door from hinges, making smooth and straight by denting applying putty and refixing by replacing unserviceable hinges.

Repairs to existing shelf by opening the clips/rivets of shelf,making smooth and straight by denting applying putty and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new shelf by opening the clips/rivets and refixing by replacing unserviceable clips/rivets.

Supply & Fixing new door by removing the door from hinges, and refixing by replacing unserviceable hinges.

Painting of Almirah large steel as per Note.

Book case steel FD-1028:- Shutters along with accessories as per drg.

Lock (Harrison/Godrej)

Glass as per drg.

Shelves as per drg

Legs as per drg

Painting of Book case steel as per Note.

Book shelves open large steel FD-69 M:- Shelves as per drg

Painting of Book Shelves open larg steel as per Note.

Table writing FD-275:- Top as per drg

Legs as per drg

Long rails as per drg

Long stiffener as per drg.

Short rails as per drg

Drawers as per drg.

Shutter as per drg.

Adjacent sides of the box as per drg.

As per item No- 1.06 but for Table writing.

Rubber Shoes as per drg.

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION

P N GUPTA AND SONS

RAJESH SHARMA INTERIOR DESIGNERS LLP

SANKAR TRADERS

M/S NEHAL ENTERPRISES