BP 2025-26 WORK OF CONSTRUCTION AND BIFERCATION OF 11 KV LINE UNDER EUDD 1 AND 5 NOIDA

Amount

Cartage of following material from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to various points site of work including loading and unloading at both ends : -

11 KV XLPE 3x185 Sq.mm.

ACSR Dog Conductor

PCC Pole 11 Mtr. long

PCC Pole 8.5 Mtr. long

ST Pole Pole 11 Mtr. long

33 KV Polymeric pin Insulator with pin

33 KV B&S Polymeric Disc Insulator with fitting

11 KV Polymeric pin Insulator with pin

11 KV Disc Insulator T&C type 45KN

Earthing Complete

Stay Set Complete

O/D jointing Kit 3x185 Sq.mm. XLPE 11 KV

S/T jointing Kit 3x185 Sq.mm. XLPE 11 KV

MS channel 100x65x1300mm (T-off)

MS channel 100x50x2400mm long

Dropper channel MS 100x50x2028mm

11 KV V-Type Cross Arm 65x65x6mm, MS Angle

Top channel MS 100x50x2040mm

Dropper channel MS 100x50x2000mm

Top channel MS 125x65x3200mm

Top channel MS 100x50x3200mm

11 KV VCB I/C CTR 600/300/5Amp

11 KV VCB O/G CTR 400/200/5Amp 350 MVA

11 KV VCB O/G CTR 200/100/5Amp 350 MVA

Providing & Fixing of following material of standard make / best quality for complete the work as per site requirement & RESPO norms by the contractor at his own cost : -

Stone Pad 300x300x75mm

GI Pipe 6" dia

MS Holding Clamp

Clamp with nut & bolt

Nut Bolt and Washer all size

Clamp for V-Type Cross Arm with Nuts & Bolts

11 KV E-Bracket

33 KV E-Bracket

Neutral Cum Earth wire G.I. 6 SWG

PG Clamp Dog to Dog

Aluminium Jointing Sleeves

Aluminium Binding Wire

Aluminium Lug for ACSR Dog Conductor

Number Plate with Clamp and Nut & Bolt

Danger Plate with Clamp and Nut & Bolt

Concrenting of pole (0.880 cu.m.each)

Cable RCC / Stone Route Marker yellow colour with proper marking.

Red Oxide Paint

Aluminium Paint

Guarding of 11 KV Line:- (i) MS Angle 65x65x6 - 520 Kgs. (ii) GI Wire 6 SWG - 1200 Kgs. (iii) GI Wire 8 SWG - 200 Kgs. (iv) Holding Clamp. - 40 Nos.

Bracing Set 4.3x4.3 Mtr. Angle Iron 65x65x6 with Holding clamp.

GI Barbed Wire

Making of O/D jointing Kit 3x185 Sq.mm. XLPE 11 KV

Making of S/T jointing Kit 3x185 Sq.mm. XLPE 11 KV

The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.

Fabrication & fixing of MS channel / Angle as per site requirement complete in all respects.

Erection of following Pole for 11 KV line by single Pole / Double Pole Structure for cable riser including fixing of all accessories as per RESPO schedule Complete in all respects.

PCC Pole 11 Mtr. long

PCC Pole 8.5 Mtr. long

ST Pole Pole 11 Mtr. long

Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.

Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.

Grouting & concreting of stay rod 1800x16 mm & Fixing, Tighting & nozzling of stay wire 5 kg with the pole of required tension with clamps, bolt & nut.

Drilling of suitable dia 200 mm by trenchless method by horizontal boring machine at a depth of 1.5 mtrs below the ground level for replacement / laying of LT cable with Road Restoration in accordance witgh GPR Survey. Any damage to Road part from estimate shall be responsibility of contractor shall take NOC permission from concerned Authority & Restore as per their norms.

Drilling of suitable dia 140 mm by trenchless method by horizontal boring machine at a depth of 1.5 mtrs below the ground level for replacement / laying of LT cable with Road Restoration in accordance witgh GPR Survey. Any damage to Road part from estimate shall be responsibility of contractor shall take NOC permission from concerned Authority & Restore as per their norms.

Providing of 06 Mtr long pieces of HDPE pipe PN 6, PE 80, 200mm Dia (PVVNL approved) after inspection of competent committee at manufacturing site of the items with actual guarantee period.

Providing of 06 Mtr long pieces of HDPE pipe PN 4, PE 63, 140mm Dia (PVVNL approved) after inspection of competent committee at manufacturing site of the items with actual guarantee period.

Laying and interconnecting of above 06 Mtr long pieces of HDPE pipe (PN 6, PE 80, 200mm Dia) & (PN 4, PE 63, 140mm Dia) (PVVNL approved) in trench for laying of 11 KV cable complete in all respects..

Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop.

Providing & Fixing of HDPE Socket suitable for HDPE pipe 200mm / 140 mm dia.

Geo-tagging of complete work as per PVVNL order No. 1919 Dated 23.08.2025 (Letter attached with condition).

Tree prunning / cutting as per work site requirement.

Laying and pulling of 11 KV XLPE Cable 3x185 Sq.mm. through HDPE pipe complete in all respects.

Laying of 11 KV XLPE Cable 3x185 Sq.mm. at D/P & in loop, in Air, riser & jumpering complete in all respects.

Digging & Laying of 11 KV XLPE Cable 3x185 Sq.mm. in trench with sand and brick in all respects.

Hi port test for 11 KV 3x185 sq.mm XLPE cable.

Hoisting of 11 KV 3x185 sq mmXLPE cable on double pole structure through GI pipe 6 inch dia 3 mtr long fixed on pole structure including its jumpering complete with clamps, bolts and nuts.

Laying, Lifting, and final Binding, Sagging / Jumpering of ACSR Dog Conductor including fixing of all accessories as per RESPO schedule Complete in all respects.

Errection & Commissioning of follwing VCB with providing suiatble channel/angle/clamp etc. as per RESPO norms complete in all respects for metering system.

11 KV VCB I/C CTR 600/300/5Amp

11 KV VCB O/G CTR 400/200/5Amp 350 MVA

11 KV VCB O/G CTR 200/100/5Amp 350 MVA

CHEMICAL EARTHING WORK (SUPPLY AND INSTALLATION) OF ABOVE VCB AS PER FOLLOWING:- Note :- The all material and labour shall be provided by the contractor with 24 month guarantee for resistance value less than one OHM.

Providing of earthing electrode :- Material Description : GI Electrode, Galvanization : 150 Micron (Min), IS Standard : IS 3043 / IEEE - 837, Short Time Current Rating kA (rms) For 1 Sec : 42 KA For 1 Sec, Dia of Electrode : 50mm, Length of Electrode : 3000mm, Weight of Electrode : 15 Kgm, Pipe Thickness : 4mm or As per IS : 1239 4mm, Inside Filling Material : Crystalline Conductive Mixture, Inner Strip : 3100 X 50 X 6 mm, Terminal Hole Dia : 16 MM. Technology : Metal Thermal Spray (Joints) Protection Earthing Resistance Value in Different Soil Conditions with ERIC Backfill Compound : Normal Soil - Upto 2 Ohms, Sand. Muran Soil - Upto 4 Ohms, Rock Soil - Upto 4 Ohms, Electrode Testing Cetificate : CPRI Testd. Surrounding Filling Material (ERIC):- Product : ERIC (Earth Resitance Improvement Compound), IS Standard : IS 3043/IEEE 837, Chemical Composition : Graphite, Activated Carbon, Bentonite, ETC., Resistivity Value : >0.2 Ohm Per Meter, Melting Temperature : 2500 Degree Centigrade, Specific Gravity : 2.6, PH Value of Chemical : 7-9, Solubility in water : 3.54, Colour : Light cream/Ash, Main Caution ; Sodium, Moisture Capacity at 105 Degree : 10%, Weight of Chemical used / Earthing Pit : 50 Kg, Water Absorbing Capacity : 20 Times, Environmental Effects : Eco Friendly. Test Certifictae : ROHS Certified, Thermal Stability : Testsed, Corrosion Resistance : Tested, Swell Test Certificate : Yes, Ph Value Test Certificate : Yes. Installation Parameter :- Need Hole Dia : 6"-8" Need Hole Depth : 3 Meter, Guarantee : 24 Month.

Providing and fixing of GI strip of size 50 mm x 6 mm suitable for VCB installed at 33/11 KV KV Substation.

Providing and fixing of PVC Pit covers for above earthing electrode terminals.

Perennial Contractors Pvt. Ltd. (BID ID -5534714)

M/S SURYA ELECTRICALS (BID ID -5532732)

Shiva Electricals Company (BID ID -5534331)

B.Dayal (BID ID -5535575)

Saraswati Electricals & Contractors (BID ID -5535219)