REPAIRS / MAINT TO FLOORING, PLUMBING, JOINERY, SUNKEN, SANITARY FITTINGS AND OTHER ALLIED WORKS TO MD / OTM ACCN AT AGE AURANGABAD UNDER GE(S) AHMEDNAGAR

Amount

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick masonry surfaces or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick masonry surfaces or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on fair faces of concrete surfaces finished even and smooth without using extra cement as in ceilings, complete all as specified and as directed.

Demolition of brick/ stone masonry built in cement or lime mortar including all quoins, arches, pillars,etc all as specified and as directed.

M&L for brick work with old size 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

All as per serial item No. 6 above but except bricks complete all as specified and as directed. Note : Old bricks obtained from demolition shall be reused.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening complete all as specified and as directed.

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of plastered surfaces of walls and applying one coat of 1 mm thick white wall care putty, sanding the surfaces till smooth finish is obtained complete all specified and as directed

M&L for preparation of old plastered surfaces of walls and applying two coats of white wash complete all as specified and as directed.

M & L for preparation of old plastered surface of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls by washing, rubbing down and stopping etc and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls by washing, rubbing down and stopping etc and applying two coat of oil bound distemper complete all as specified and as directed.

M&L for preparation of old decorated plastered surface of walls by washing rubbing down and stopping etc and applying one coat of cement base paint complete all as specified and as directed

M&L for preparation of old decorated plastered surface of walls by washing, rubbing down and stopping etc and applying two coats of cement base paint complete all as specified and as directed

M&L for preparation of old decorated plastered surface of walls by rubbing down and stopping etc and applying one coat of exterior acrylic emulsion weather coat paint white or tinted as approved complete all as specified and as directed

M&L for complete removal of existing treatment on walls including cornices by scrapping with steel scrappers or any other means and applying two coats of exterior acrylic emulsion weather coat paint white or tinted as approved over a coat of primer complete all as specified and as directed

M&L for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm, shade as approved by GE, as in floors etc., laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. Note : Colour and shade shall be as approved by Engineer-in-Charge.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm, shade as approved by GE, as in floors etc., laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. Note : Colour and shade shall be as approved by Engineer-in-Charge

All as per serial item No 25 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4 .

M&L for coloured non skid ceramic tiles, 7 to 8 mm thick (square / rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm, as in floor etc laid over and including 15mm thick bedding layer in cement mortar 1:6, jointed in grey cement slurry and pointed in white or coloured cement to match with colour of tiles all as specified and as directed. Note : Colour and shade shall be as approved by Engineer-in-Charge

All as per serial item No 27 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4 .

M&L for light shade vitrified coloured ceramic tiles, 8 to 9 mm thick (square / rectangular), area of each tile n exc 0.36 sqm in floor laid over and including 15 mm thick bedding layer in cement mortar 1:6, jointed in grey cement slurry and pointed in white or coloured cement to match with colour of tiles all as specified and as directed. Note : Colour and shade shall be as approved by GE.

All as per serial item No 29 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4 .

M&L for coloured glazed ceramic tiles, 7 to 8 mm thick (plain or printed), size of each tile 350 x 250 mm / 450 x 350 mm, as on vertical surfaces like dado, skirting etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed. Note : Colour and shade shall be as approved by Engineer-in-Charge

Dismantling of stone slab, kota stone, cudappa slab supports to platforms, interlocking tiles, granite etc any description, laid, bedded & pointed in any mortar, all as specified and as directed.

M&L for machine cut Kota stone flooring, 18 to 22 mm thick (size of kota stone slab 18"x22") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

All as per serial item No. 33 here-in-before but 18 to 20 mm thick Kota stone on vertical surfaces such as in skiting /dado of size as required at site over and including 10 mm thick backing coat of cement mortar (1:3) complete all as specified and as directed.

M&L 18 to 20mm thick pre-polished granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/platform, gate pillars, cills etc or on vertical surfaces including vertical projection, including full round moulding the edges, laid over and including screed bed 15mm thick in cement mortar 1:4, jointing, pointing in white cement 1:2 using marble dust with admixture or pigment to match the shade of granite and rubbing, polishing to achieve mirror finish complete all as specified and as directed. Note : Colour and shade shall be as approved by GE.

M&L for machine cut Cudappah stone slab 20-25mm thick laid over and including screed bed 20mm thick in cement mortar 1:6, jointing, pointing cement, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including roughening of old concrete floor surfaces by picking etc complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level all as specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D-2, using 40 mm graded stone aggregate as in sub base of floor all as specified and as directed.

M&L for 75mm thick plain cement concrete, 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for precast cement concrete coloured chequered tiles with glossy finish of size 25cm x 25cm x 25mm thick, machine pressed with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 and pointed in coloured cement to match the colour of tiles complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 Sqm but not exceeding 4 Sqm each and making good disturbed surfaces of walls all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each and making good disturbed surfaces of walls all as specified and as directed.

Taking down shutters of any description, area exceeding 1 Sqm but not exceeding 2 Sqm each all as specified and as directed.

M&L for rolled mild steel sections conforming to Fe-290 (Gde E-165) as in door chowkats/frames, cooler stand and the like including cutting to required length, welding, etc, including preparing back of chowkats and applying two coats of tar and sanding newly tarred surfaces with clean sharp sand complete all as specified & as directed.

M&L for PCC 1:2:4, type-B0 using 12.5 mm graded aggegate as in hold fast, bed blocks, coping and similar work etc including necessary form work complete all as specified and as directed

S&F 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides including 6mm thick teak wood beading all around fixed to chowkats complete all as specified and as directed.

S&F 35mm thick second class hard wood, factory made, plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & as directed.

S&F 35 mm thick, second class hard wood glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc. for doors, divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F factory made, solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet, reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing given in SSR 2009 Part I complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications & drawing all as specified and as directed.

S&F mild steel windows, side hung, including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and as directed.

S&F mild steel windows, side hung, including projecting type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and as directed.

S&F powder coated anodised aluminium frames (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and as directed. Note : Colour shall be as approved by Engineer-in-Charge.

S&F powder coated anodised aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m (minimum thickness of powder coating 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc and locking arrangement complete all as specified and as directed. Note : Colour shall be as approved by Engineer-in-Charge.

S&F powder coated anodised aluminium window and ventilator shutters, (minimum thickness of powder coating 50 micron) fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed . Note : Colour shall be as approved by Engineer-in-Charge.

S&F powder coated anodised aluminium window and ventilator shutters, (minimum thickness of powder coating 50 micron) side hung type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and as directed. Notes : (i) Sheet glass and wire mesh shall be measured and paid separately. (ii) Colour shall be as approved by Engineer-in-Charge.

S&F powder coated aluminum windows, three track, made out of aluminium sections (minimum thickness of powder coating 50 micron) (make Jindal or as approved) including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprises of following sections :- (a) Window frame (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Side - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter (i) Vertical (end)- 20669 (Wt not less than 0.548 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m) Note : Colour shall be as approved by Engineer-in-Charge.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Note : Colour shall be as approved by Engineer-in-Charge.

S&F factory made UPVC any colour sliding window, three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Notes: (a) Glass sheet shall be measured and paid seperately under respective item. (b) Unit rate quoted shall include all connected accessories. (c) Net Opening shall be measured for payment purpose.

S&F 4.8 to 5mm thick clear float/ frosted glass of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 4.8 to 5mm thick clear float/ frosted glass of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F mild steel framed work such as grills, framed guard bars and similar work conforming to Fe-290.Gde-E-165, welded to steel ventilators & window complete all as specified and as directed.

S&F in repair 0.9m to 1.5m bottom door seal brown for aluminium frame 38 to 45mm wide all as specified and directed.

S&F in repairs mild steel helical door spring 150 mm long ordinary rat tail type including roller and roller plate fixed with screws to wooden frame complete all as specified and as directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over one coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide zinc chrome primer complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel staple to wooden/steel frames all as specified and as directed.

S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed with stanless steel staple to wooden/steel frames all as specified and as directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, all as specified and as directed.

S&F in repairs, 300mm size, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

S&F 75 mm size butt hinges medium weight, stainless steel and fixed all as specified and as directed.

S&F 75 mm size butt hinges medium weight, mild steel and fixed all as specified and as directed.

S&F 125 mm size butt hinges medium weight, mild steel and fixed all as specified and as directed.

S&F 125 mm size extruded aluminium alloy anodised handles, fabricated type, all as specified and as directed.

S&F 150 mm size extruded aluminium alloy anodised handles, fabricated type, all as specified and as directed.

S&F 150 mm size extruded section aluminium anodised barrel tower bolt all as specified and as directed.

S&F 200 mm size extruded section aluminium anodised barrel tower bolt all as specified and as directed.

S&F in repairs 150 mm size extruded section aluminium anodised barrel tower bolt all as specified and as directed.

S&F in repairs 200 mm size extruded section aluminium anodised barrel tower bolt all as specified and as directed.

S&F in repairs 150 mm size aluminium alloy anodised handles, fabricated type, all as specified and as directed.

S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F in repairs 300 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

S&F stainless steel handle 100 mm size all as specified and as directed.

S&F in repairs double action floor spring hydrulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repairs cast iron body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

Resecuring or easing & adjusting without taking down shutters of any description, area exc 1 sqm and not exc 2 sqm each all as specified and as directed.

Resecuring or easing & adjusting without taking down shutters of any description, area not exc 1 sqm each all as specified and as directed.

Repair to aluminium door and window from existing frame and replace the glass joining cleat, glazing clip & rubber neoprene packing of glass / wiremesh and refix the glass in panel, incl refixing the loose stile of door and window with reqd aluminium cleats complete and refix the panel shutter with frame complete all as specified and directed.

Repair to steel window / gate including necessary welding, reivting, easing drilling and replacement of unserviceable hanging device and making then in serviceable condition complete all as specified and directed.

Taking down 15 mm bore steel tubing and connections all as specified and as directed.

Taking down 20 mm bore steel tubing and connections all as specified and as directed.

M&L for UPVC pipes, 15 mm bore (Pressure rating 10 kgf/cm²) laid in trenches / floors or fixed to wall in any length with all UPVC fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including dismantling/ taking out old pipe complete all as specified and as directed.

M&L for UPVC pipes, 20 mm bore (Pressure rating 10 kgf/cm²) laid in trenches / floors or fixed to wall in any length with all UPVC fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete including dismantling/ taking out old pipe complete all as specified and as directed.

M&L for cutting chases for pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth all as specified and as directed.

S & F in repairs vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets, pillar tap 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, 32 mm waste coupling brass chromium plated suitable for wash hand basins, and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets with pedestal, pillar tap 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, 32 mm waste coupling brass chromium plated suitable for wash hand basins, and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.

S & F in repairs vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mm with integral foot rests (excluding flusing cistern) including traps & set in cement concrete as specified including flush pipe and connecting to trap complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (Pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repairs, plastic water closet seat cover, white/ black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and as directed.

S & F in repairs CP/ SS jet with flexible tube upto 1m long with triangular plate fixed to EWC complete all as specified and as directed.

S & F in repairs, PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S & F in repairs, PVC waste pipe 32mm dia, length 600 mm with one end socketed complete all as specified and as directed.

S&F in repairs stainless steel grating, square 100mm size with hole to fix waste pipoe complete all as specified and as directed.

S&F in repairs stainless steel grating, square 100mm size complete all as specified and as directed.

S&F in repairs, soap dish, brass chromium plated, approximate size 160 mm x 100 mm x 90 mm, fixed with plugs with chromium plated brass screws & gutties complete all as specified and as directed.

S&F in repairs, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S & F in repairs, brass chromium plated wall mixer for mixing hot and cold water and bend for connecting shower, screwed down for iron pipe 15mm bore and fixed complete all as specified and as directed.

S & F in repairs, brass chromium plated centre hole basin mixer for mixing hot and cold water screwed down for iron pipe 15mm bore complete all as specified and as directed.

S&F in repairs, brass chromium plated shower rose 125mm size, with or without swivel joints, including fixing to steel pipes complete all as specified and as directed.

S & F in repairs stop valves 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs, bib tap, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs, brass chromium plated two way angle valves, 15mm dia, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads, fancy type, chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs, tubular towel rail, brass chromium plated, 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets all as specified and as directed.

S&F in repairs, glass shelf assembly consisting 5.5mm thick glass shelf, 12cm wide with SS chromium plated bracket guard and railing 60cm long and fixed to wall with stainless steel screws complete all as specified and as directed.

S&F in repairs, wall corner, glass shelf assembly of size 30cm radius consisting 5.5mm thick glass and fixed to wall with stainless steel screws complete all as specified and as directed.

S&F in repairs, stainless steel sink made of 1mm thick sheet for kitchen including plugs, washers, waste pipe, cast iron cantilever brackets, connecting union to pipe, over all size 495 mmx 420 mm with bowl size 410 mm x 330 mm x 160 mm all as specified and as directed.

S&F in repairs, stainless steel sink with drain board made of 1mm thick sheet for kitchen including plugs, washers, waste pipe, cast iron cantilever brackets, connecting union to pipe, over all size 915 mmx 460 mm with bowl size 410 mm x 330 mmx 160 mm all as specified and as directed.

S&F in repairs 32mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting all as specified and as directed.

All as per item No. 125 above but 1000 ltr capacity

M&L for cleaning of service tank upto 500 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud etc from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by spraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils complete all as specified and as directed. Note:- The quoted rate shall include dismantling and refixing of water tank and float valve refixed or provide new as required etc complete all as specified and as directed.

M&L for cleaning of service tank upto 1000 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by spraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils complete all as specified and as directed. Note:- The quoted rate shall include dismantling and refixing of water tank and float valve refixed or provide new as required as etc complete all as specified and as directed.

S&F in repairs PVC cover/lid for rotational moulded polythene water storage tanks of any capacity including fixing with necessary device complete all as specified and as directed.

S & F in repairs, ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore iron pipe (Minium weight 210 gms), complete all as specified and directed.

S & F in repairs, ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 15 mm bore iron pipe (Minium weight 145 gms), complete all as specified and directed.

S & F in repairs, 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

S & F in repairs, 25 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

S&F in repairs, Harrison curtain rails 20mm dia, mild steel, plastic coated, fancy type fixing with and including brackets, stops etc complete all as specified and as directed.

S&F in repairs, 75 mm dia PVC (SWR) nahani/floor trap with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from woden/ metal frames including punching or drilling out old glazing pins / spring clips complee all as specified and as direced

S&F 3 mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel/ wooden windows including glazing pins etc. complete all as specified and as directed.

S&F 3 mm thick frosted/figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel/ wooden windows including glazing pins etc. complete all as specified and as directed.

M&L for welding in repairs, n exc 2.5cm in length, thickness of metal to be welded n exc 6mm complete all as specified and as directed.

S&F in repairs 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work including 6mm thick teak wood lipping all around of 18/19mm thick including french polishing as required complete all as specified and as directed.

S&F stainless steel continuous (piano) hinges, 30mm width of flaps (when open) complete all as specified and as directed.

S&F in repairs 100mm size hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate, fixed with screws complete all as specified and as directed.

S&F in repairs, 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, polished bright finished complete all as specified and as directed.

S&F in repairs, ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed.

M&L for PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregates) as in coping, cills, plinth courses, string courses, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed.

Demolition of reinforced cement concrete in ground floor & paving n.exc. 15cm thick below or above ground level (reinforcement cut to facilitate demolition) all as specified and as directed.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete all as specified and as directed.

Use & waste of formwork to edges of slabs and similar work exc 10cm but not exc 20cm wide for rough finished flat surfaces of concrete all as specified and as directed.

M&L for mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for RCC 1:2:4, type B-1, using 20mm graded stone aggregates in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed. Note : Reinforcement shall be measured and paid seperately.

Taking down pipes (PVC, AC or RCC ) of any size and in any position including all fittings like heads, shoes, bends, swan-necks, etc (measured overall as fixed along with the centre line over fittings and accessories) complete all as specified and as directed.

S&F 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.

S&F 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.

S&F 75 mm dia PVC (SWR) junction single T, equal or unequal with access door of any radius complete all as specified and as directed

S&F 110 mm dia PVC (SWR) junction single T, equal or unequal with access door of any radius complete all as specified and as directed

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed

S&F stack clamps made out of 50mm X 3mm flat iron and 16 mm round iron stay including bolts and nuts and securing ends stays to wall or roof including taking down the existing clamps for pipe 110mm bore at any height all as specifed and as directed.

S&F in repairs 110 mm dia PVC (SWR) bend/ shoe complete all as specified and as directed

M/S Tirupati Goroba Shendge (BID ID -3125229)

kgn associate (BID ID -3129016)

M/s S.R lahoti (BID ID -3130448)

M/s kishor M Lalwani (BID ID -3131189)

M/s.M G Kulkarni (BID ID -3130040)

sunil kaduba dakale (BID ID -3130095)

ASHWAMEDH ENGINEERS (BID ID -3130497)

M/S. M.A. Sharief engineers and contractors (BID ID -3130810)