Repair and maintenance including painting and distempering of Type-1 Qtrs. at NIT Hamirpur (HP)

Amount

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within campus lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within departmant store lead as per direction of Engineer-in-charge.

In cement mortar

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within department store lead as per direction of Engineer-in-charge.

75 to 80 mm dia pipe

100 mm dia pipe

Excavating trenches of all kinds of soil required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of campus.

Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia

Centering and shuttering including strutting, propping etc. and removal of form work for including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Foundations, footings, bases for balcony

Providing and laying in position cement concrete of specified grade of brand ACC,ULTRATECH, AMBUJA excluding the cost of centering and shuttering - All work up to plinth level including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement of brand SAIL, TATA STEEL LTD. JINDDAL for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Mild steel and Medium Tensile steel bars

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

With F.P.S.(non modular) bricks

Providing and fixing up to floor five level precast cement concrete solid block of brand MYK LATICRETE, ULTRATECK, SIKA, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size (Recycled Concrete Aggregate (RCA) upto 25%)).

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Second class teak wood,30 mm thick shutters

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

30 mm thick shutters,with ISI marked M.S. pressed butt hinges bright finished of required size,Second class teak wood

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Providing and fixing on wall face PVC (D-Plast, SUPREME, FINOLEX) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete.(100mm dia) including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

75 to 80 mm dia pipe

100 mm dia pipe

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over of brand NATIONAL TILE CORPORATION, SARAL IMPEX, METRO PAVERS and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position of brand SAIL, TATA STEEL ,JINDAL STEEL & POWER LTD. and applying a priming coat of approved steel primer using structural steel etc. as required including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

Providing and fixing precoated galvanised iron profile sheets of brand SAIL, TATA, JINDAL (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Providing and fixing precoated galvanised steel sheet of brand SAIL, TATA, JINDAL roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Ridges plain (500 - 600mm)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Distempering with 1st quality acrylic distemper (ready made) of brand NEROLAC/BERGER/ ICI(DULEX). of approved manufacturer and of required shade and colour complete. as per manufacturer's specification including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

One or more coats on old work

Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand NEROLAC, BERGER, ASIAN PAINT and manufacture on steel galvanised iron/ steel works including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Painting Steel work with Deluxe Multi Surface Paint of brand NERILAC, BERGER, BRITISH PAINT to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

Painting with synthetic enamel paint of approved brand NEROLAC / BERGER/ BRITISH PAINT and manufacture of required colour to give an even shade including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

One or more coats on old work

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix including entire carriage of material in all leads , lifts, Height and cost of all other incidentals.

1:4 (1 cement: 4 fine sand)

Jia Construction