Modification in ducting and associated works for 4 x 7 TR package AC at Co-axial AC Plant Moradabad.

Providing and fixing of sandwitched partition with 25 mm fiberglass of 24 Kg/m3 density sandwitched between 2 Nos. MDF particle boards of 12 mm thickness on a suitable frame work fabricated out of 50 mm x 25 mm x 18 SWG MS rectangular pipe section having grid work of not less than 1200 mm x 600 mm. fiberglass covered in vapors barrier i/c fixing fastener, screens, hinged bolted door frame paining one cot of primer and two coats of approved shade synthetic enamel paint etc. as required

Providing & fixing of Aluminium linear powder quoted grills for supply Air with volume control damper complete as reqd.

Providing & fixing of Aluminium linear powder quoted grills for Return Air without volume control damper complete as reqd.

Supplying, installation, balancing and commissioning of site fabricated GI sheet ducting complete with neoprene rubber gaskets, elbows, vanes, hinges supports etc as per approved drawing and specifications of following sheet thickness complete as required. (a) 24 SWG (0.60/0.63 mm)

Supplying, Laying, Testing & commissioning of 19 mm thickness closed cell elastometric nitrile rubber of class ‘O’ applied by suitable adhesive (of fevicol/Dunlop make) as per specification complete as required. (a) Without Aluminium faced surface

Supplying, installation, testing and commissioning of 1500 CFM Inline Duct fan with noiseless and vibration free air flow, having GI casing duly acoustically treated, light weight dynamically balanced Aluminium impeller, high quality long life single phase 230 volt motor, casing having hinged access door for inspection service etc. complete as required (Make Blowtech or SS make)

SITC of 450 mm Sweep Ex-Fan suitable for operation on 240 volts single phase 50 Hz AC supply system i/c cutting the existing wall and making it suitable for fixing the Ex-fan , making good damage connection, testing and commissioninge i/c fixing the damper louvers/shutters complete with frame etc. as required (Make Marathon or SS make)

Supplying & Fixing 3 Core 1.5 Sqmm XLPE instated, PVC sheathed Copper Conductor armoured cable for package unit and inline fans, end termination glass, lugs etc. complete as required.

Supplying and fixing of 16 Amp, 240 Volt, C curve DP MCB i/c connection etc as reqd.

Cutting RA opening in existing masonry 9" thick wall i/c making good the same by sand cement plaster, white wash, throwing wastage malva out of Telephone exchange premises i/c providing / fixing bricks etc. complete as reqd.

Dismantling of existing boards for fixing inline fans in existing RA boxing and supply /fixing new 11 mm thick MDF Board i/c necessary modifications etc. complete as reqd.

Dismantling of existing Tin shade of outdoor condensers of 4 x 7 TR A/c plant i/c cutting, unscrewing, welding and shifting, transportation the same by mechanical transport to desired store space etc. as reqd.

DEEPAK ELECTRICALS (BID ID -3247771)