Construction and Furnishing of ASCO Office Building, Agalpur with boundary wall water supply system and other peripheral development, Bolangir

CONSTRUCTION OF ASCO BUILDING

Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge

Filling foundation and plinth with sand well watered and rammed including cost and conveyance of materials.

C.C.(1:4:8) with 4 c.m. size h.g. metal in F&P.

Brick work with FLY ASH bricks inC.M(1:4) in foundation and plinth

Brick work with FLY ASH bricks inC.M(1:6) in foundation and plinth

Filling in foundation and plinth with excavated materials including watering and ramming

Brick work with FLY ASH bricks inC.M(1:6) in Super structure in Ground Floor

Brick work with FLY ASH bricks inC.M(1:6) in Super structure 1st Floor

RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting by using vibrator ramming for ground floor

(a) Column base, pedestal, plinth band

(b) Lintel

(c) Column and beam

(d) Sun shade, loft and Chajja

(e) Roof Slab

(f) Stair

RCC Work M-20 grade with 20 mm and down grade HG chips (CB) including hoisting,lowering & laying concrete and compacting by using vibrator ramming for 1st floor

(a) Column and beam

(b) Lintel

(c) Sun shade, loft and Chajja

(d) Roof slab

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in ground floor

Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification in first floor

2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work in Ground floor

2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work in first floor

6mm thick cement plaster in C.M(1:4)R CC surfaces for ground floor

6mm thick cement plaster in C.M(1:4)R CC surfaces for First floor

16 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in ground floor

16 mm thick cement plaster in c.m(1:6) over brick masonry, inside walls in first floor

12 mm thick cement plaster in c.m(1:6) over brick masonry, out side walls ground floor

12 mm thick cement plaster in c.m(1:6) over brick masonry, outside walls first floor

Cement washing two coats over the plastered surface in ground floor

Cement washing two coats over the plastered surface in first floor

Finishing walls with water proofing weather coat paint of approved shade on new work to give even shade 2 coats outside Ground Floor

Finishing walls with water proofing weather coat paint of approved shade on new work to give even shade 2 coats outside First Floor

Finishing walls with two coats of plastic emulsion pain of approved shade on new work to give an even shade in ground floor.

Finishing walls with two coats of plastic emulsion pain of approved shade on new work to give an even shade in first floor.

Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778 as windows frame, section No.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P including cost of glass etc. complete as per direction of Engineer-in-charge.

Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board in bottom portion fixed on door frame by means of tapered clip No.4660 and the frame to be completed by means of jointing angle No. 1855

Providing fitting, fixing of Al. Fixed Window with OEL anodized Al. section of 9210 and 9207 as single groove & Double groove respectively as horizontal and vertical member and section 4600 as tapered clip and joining angle No. 1855 and 6mm plain glass fixed on frame by means of tapered clip and the frame to be completed by means of jointing angle including all cost of labour, T&P, hire charges of drilling machine, labour charges etc.complete.

Supplying, fitting and fixing of M.S. fabricated panelled windows with grill made out of mild steel sqauer bar, flats, angles, & sheet as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction of Engineer-in-charge.

Painting 2coats of waterproof enamel paint over one coat red oxide primer over new iron work

Supplying, fitting and fixing vitrified industrial tiles in floors of size 300mm x 300mm of approved make confirming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, T&P etc required for the work all complete

Fitting tiles in dadoes skirting and riser of steps on 12mm thick cement plaster(1:3) joined with neat cement slurry mixed with pigments to match the shade of tiles including rubbing &polishing complete including cost of Vitrified tiles

Fixing of Ceramic Glazed tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles.

Fixing of glazed ceramic tiles in dado, skirting and risers of steps on 12mm thick cement plaster in mortar (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of tiles

Fitting tiles in floors,treads or steps and landing on 25mm thick bed of cement mortar(1:1) joined with neat cement slurry mixed with pig ments including cost of Chequred tiles

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification

Construction of PH & Sanitary Work for ASCO Building.

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of PVC pipes,class- confirming to ASTM-D-1785/89(Sch-80) and pipe fittings of the following nominal bore with clamps fittings including making good the wall,ceilling and floor,testing all complite as per specification and direction of the Engineer -in-charge.

25 mm dia PVC Pipe

32 mm dia PVC Pipe

50 mm dia PVC pipe

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CPVC pipes, confirming to IS:15778 having thermal stability for hot &cold water supplay,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m specing, with jointing the pipes with CPVC solvent cement and testing the joints complete as per specification and direction of the Engineer -in-charge.

20 mm dia CPVC Pipe

25 mm dia CPVC Pipe

Supplying, fitting, fixing of 50 mm dia. G I bend etc. complete

Supplying, fitting, fixing of 50 mm dia. G I Tee etc. complete

Cutting grooves in pucca floors and walls for taking CPVC pipe s and making good the damages as per specification and direction of the Engineer -in-charge.

Cutting holes through existing brick work for taking CPVC pipe s and making good the damageswith cement morter (1:6) as per specification and direction of the Engineer -in-charge.

Cutting holes through existing in R.C.C. Floors and roofs upto 19 cm. for taking CPVC pipe s and making good the damageswith cement voncrete (1:2:4) as per specification and direction of the Engineer -in-charge.

Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Bib cock(Tapes)/CPittings of the following ISI approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge.

15 mm dia CP Brass Short Body Bib cock .

15 mm dia CP Brass Pillar Cock

CP flanges

CP grating

Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Stop cock / CPittings of the following IS:781-1995 approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge.

15 mm dia CP Angle Stop Cock

Supplying, fitting, fixing of 15 mm dia CP concealed stopcock etc. Complete.

Supplying all materils,labour,T&P and fixing Rotational moulded polithylene cylindrical vertical water storage tanks conforming to IS 12701-1996 Including cutting holes through the tank and fixing mild steel tubes and fittings and providinng extra socket and jam nuts,fixing ball valave etc,including hoisting up to a height of extra 5 Meters above ground level and placing the tank to the required position etc, all as per speci fication and directionof the Engineer incharge.

2000 liter capacity Double-layer Tank (ISI Marked)

Supplying, fitting, fixing of 15mm dia. PVC connection pipe for pillar cock, supply mains for wash basin etc. Complete. Supplying, fitting, fixing of 15mm dia. PVC connection pipe for pillar cock, supply mains for wash basin etc. Complete.

Supplying all materials,labour,T&P and fitting, fixining following PVC items and filling of the following outside diameter conformoring to IS 13592 Type A, to walls with seal ring conforming to IS:5382,leaving 10 mm gap for 10mm thermal expansion,(1) single socket pipes as per manufactures specification testing, all complite as per specification and directionof the Engineer incharge.

75 mm OD UPVC SWR S/S pipes

75 mm dia UPVC single Y with door

75 mm dia UPVC door bend

75 mm dia UPVC plain Tee

75 mm dia UPVC Cowl

75 mm dia UPVC plain bend

110 mm x 75 mm dia UPVC WC connector

110 mm OD UPVC SWR S/S pipes

110 mm dia UPVC single Y with door

110 mm dia UPVC door bend

110 mm dia UPVC plain Tee

110 mm dia UPVC plain bend

110 mm dia UPVC Cowl

Supplying all materials,labour,T&P and fitting, fixining ,laying in trenches High Density Polythine pipes conforming to IS-4984-1995 and specials of the following outside diameter conformoring to Class 1 to Class 3 and jointing by fusion welding method including testing as per manufactures specification testing, all complite as per specification and directionof the Engineer incharge (Earth work in trenches measured separetly).

110 mm dia H.D.Pvc Pipe

Supplying all materials,labour,T&P and fitting, fixining of white glazed vitreous china sqatting pan of size 500 mm x 440 mm size duly embedded in cement concrete (1:4:8) using hard granite metal 4 cm. nominal size and cement mortar (1:1),cutting the floor and mending good the damages etc,all complete as per specification and direction of the Engineer inchargr.

Porcelain I.W.C 20"size(500mmX440mm) White glazed Virtious Odisha pattern squating Pan of reputed make

Supplying all materials,labour,T&P and fitting, fixining of Wash down water Closest (Europian type W.C pan) with Integral"S" or "P" trap conforming to IS 2556:Part 8-2004, to the floor with Wooden Plug And Chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc,,all complite as per specification and direction of the Engineer inchargr.(Without Seat &Cover)

White Vitreous China EWC Pattern with "P" Trap

Supplying all materials,labour T &P Fitting of 10 liters capacity PVC L L flushing Cistern with manually controlled device(handle lever) conforming to IS :7231,etc all complite as per specification and direction of the Engineer incharge. .

10 Liters P.V.C.low level Flushing Cystern

Supplying all materials,labour T &P Fitting of Plastic Seat and cover for wash down water closet with cromium plated brass hinges and rubber buffer etc all complite as per specification and direction of the Engineer incharge. .

White Plastic Seat &cover with CP Brass Hinges

Supplying all materils,labour, T&P fitting,fixing of Long Bowl Pattern Urinal conforming to IS 2556: Part 6-1996 including connection to the Urinal of Angle back 430x260x350 mm sizes respectvely with waste pipe by means of white cement(lead) mixed with chopped hemp etc ,as per specification and direction of the Engineer -in-charge

Virtious China -Angle Back Urinal of 430mm x 260mmx 350mm (Parryware/Hindustan)

Supplying all materils,labour, T&P fitting,fixing of glazed earthenware Ladies urinal (squating plate) of size 600 mm x 355 mm conforming to IS:2556-Part-6-1995 with integral longitudinal flushing pipe including embedding the plate 25mm cement morter (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal etc ,as per specification and direction of the Engineer -in-charge

Ladies urinal (Virtious china sqatting plate urinal) size 600mmx355 mm

Supplying all materils,labour, T&P fitting,fixing of Stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1:8 cm thick, fixed in urinal partitions by cutting a chase of appropiate width with chase cutter and embedding the stone in the chase with epoxygrout or with concrete 1:2:4 etc ,as per specification and direction of the Engineer -in-charge.

Grinite stone Partition Wall (75cm.x50cm.)

Supplying all materils,labour, T&P fitting,fixing of Virtious China flat Wash basin over sizes 550 mm x 430 mm with hole for pillar taps conformoing to IS 2556 : Part 4-2004 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All complite as per specificationand direction of the Engineer-in-charge.

Virtious China flat wash basin of 550mm x 430 mm (Parryware/Hindustan)

Supplying all materils,labour, T & P fitting,fixing of PVC waste pipe for wash basin or sink i.e Flexiable (Coil shaped) PVC Waste pipe 40mm dia with length not less than 700 mm with PVC waste fittings etc. All complite as per specificationand direction of the Engineer-in-charge.

Flexible (coil shaped) PVC waste pipe for sink or wash basin 32 mm dia with 900 mm long waste fittings

Supplying all materils,labour, T&P fitting,fixing of CP brass towel rail wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

25 mm dia x 600 mm long. (24")

Supplying all materils,labour, T&P fitting,fixing of plate glass shelf with CP brass brackets wooden plugs CP srew and cement etc. All complite as per specification and direction of the Engineer-in-charge.

120 mm x600 mm

Supplying all materils,labour, T&P fitting,fixing of bevelled type plate glass mirror with wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

600 mm x 450mm

Supplying all materils,labour, T&P fitting,fixing of Cp soap Holder standard sizewith wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

Supplying all materils,labour, T&P fitting,fixing of CP brass towel ring wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

CP Brass Towel Ring

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CP Brass Shower rose with CP revolving Shower with 15 to 20 mm inlet & 150 mm dia etc compliteas per specification and direction of the Engineer -in-charge.

Supplying all materials,labour and fixing of Brass Full Way Valve conforming to IS: 781-1995 of the 32 mm Full way Valves including all taxes etc complite as per direction by Engineer in charge.

Supplying all materials, labour T&P and constructing Inspection chamber of the following sizes with c.C(1:3:6) using 40mm size h.g. metal on bed, Ist class K.B. brickwork in c.m (1:6), moulding and shaping the channel inside and benching with c.c. (1:1.5:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside cement flush pointing (1:3) to outside R.C.C. cover slab Inside size 760mm x 760mm x 460mm with all complete

Construction of Internal Electrification Work For ASCO Building

Recessed wiring to Light point / Exhaust fan point with switch (Module) Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non- metallic PVC flexible conduit with 5A 25 on MS box having front bakelite cover of suitable size, MS box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/HavellsN-Guard/ Great White/HPL) with all cost of material and labour etc.

Light Point / Exhaust Fan Point (Module)(Short)

Light Point / Exhaust Fan Point (Module)(Medium)

Light Point / Exhaust Fan Point (Module) (Long)

Supply & Fixing of 5 Amps. Wall socket on existing Board (Module)

Supply & Fixing of 5 Amps. Wall socket with switch on Separate Board (Module)

Supply & Fixing of 15 Amps. Switch & Socket (Module)

Recessed wiring to Sub-main along with the following size of PVC insulated single core multistrand copper conducter ISI marked in 20 mm dia non metalic heavy duty flexible conduct 1.6 mm in Recessed PVC conduct as required (Make -Finolex/L&T/Anchor/Havels/V-Guard)

2x2.5 sqmm+1x1.5 sqmm run in 25 mm dia felxiable conduit

2x4 sqmm+1x 1.5 sqmm run in 25 mm dia felxiable conduit

2x6 sqmm+1x2.5 sqmm run in 25 mm dia felxiable conduit

2 x10 sqmm+1x4 sqmm run in 25 mm dia felxiable conduit

4x6 sqmm +2x2.5 sqmm run in 32 mm dia felxiable conduit

4x10 sqmm+2x4 sqmm run in 32 mm dia felxiable conduit

Supply and fixing of 25 mm dia Polythene pipe

Supply and fixing of 32 Amp FT / DP switch (Make-Cona/Anchor)

Supplying & Fixing of Angle Batten Holder / Batten Holder

Supplying fitting & fixing of 6 Way BDB with 6 MCB

32 Amp. Double pole MCB

Supplying & fixing of Earth Bus Bar of 50 mm X 5 mm and 500 mm Long.

Supply and fixing M.S. Bracket made out of 50 x 5mm size flat 150cms long fixed horizontally on wall by grouting the same in space provided for electrical duct at an vertical distance 100 cms and having clearance of 50mm from wall surface laying pipe/wire G.I strips running earth complete with all accessories with all pants and primer.

Supply and fixing of junction box made of 1.22mm thick M.S. sheet and having provision of hanged door on front side and top two side is punched for running cable for individual flat with appropriate size fixed in the electrical duct.

100Amp TPN bus bar-300 X 32 X 3mm size

Supply of PVC armored cables ISI marked (Make- Glowstar/Polycab/Nicco/KEI/HPL/Mescab) (50sqmm 3 1/2 core)

Trenching with sand spreading and bricks laying and laying of cable in trench in 2 1/2" depth pvc cable axceeding 35sqmm to 120sqmm

Supply and fixing of fan hook 16sq. mm Rod in R.C.C. roof with all accessories

Supply, fabrication of Electrical Rotary Panel at individual Flat of size 16” x 8” x 5” with 1.22 mm thick with front hinged door with provision of D. O. rotary main switch & cutouts with one coat of red oxide and one coat of hammer paint,

Supply and fixing of 320 Amp TPN switch disconnector fuse (pannel mounted type with ISI marked HRC fuse)

Supply and fixing of Gadan light / Gate light

Supply and fixing of fan hook 16sq. mm Rod in R.C.C. roof with all accessories.

Supplying & Fixing of Ceiling Rose

A.C Ceiling fan 48/56"

Electronics step type Regulator

S/F of 15W LED light fitting (Make - Havells / Phillips/Bajaj)

Supply and fixing of 6 sq mm cable for Gardan light /Gate light

Supply and fixing of A.C. Air terminals

Supply and fixing of standard earthing with 40mm diameter G.I. Pipe 3 meter long. 12mm diameter 15cm. holes 40mm diameter flange at top with R.C.C. earth pit chamber, masonary wall work, Alternate layer of charcoal and salt, complete with all accessories. (Earthing)

Extra copper flat for Earthing (25 x 6 mm)

Supply and fixing of 25 x 3mm size G.I. flat in both horizontal and vertical run from L.C. Air terminal at the building top to the earthing electrode in the ground G.I. flat will run along the wall surface and shall be fixed on the wall with the help of G.I. staples joints shall be made, with help of G.I. Nut and bolt.

Supply and fixing of 25 mm dia Polythene pipe with all cost

Installation of Deep Bore Well

Survey,investigation bore well

Conducting VES test 3nos for each bore well including 20% on faild

Labour for drilling a perfectly vertical bore hole of 200 mmdia for over burden and 150mm for hrd rock specified dia for aspecified depthbelow ground level through unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs with PLC facility(1200cfm/300psi) asrequired tosuit the site condition as per the direction of the Engineer in charge including use of own rigs with its accessories,tools,plants and and consumable etcfor low weiring of 200 mm dia PVC/GI pipes for housing with socket and with or without well screen as per the necessity for soft, medium ,hard and boulder formation(GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contract including lowering and withdrawing after completion of the tube well) up to 150mm

Lowering the casing pipe of 200mm dia with or without slotted pipes as the necessity from the ground level up 45 mt depth and fitted and fixed up inperfectly vertical position including cutting , threading and slotted pipes and supply and fixing all jointing meterials tools and plants etc completeing and keeping he top of the casing pipes threaded including plugging the bore well to prevent entry of foreign materials from above 0 to30 mt

Cost of 200 mm dia PVC(sch-80) casing pipe of reputed make as per ASTM1785/2004 specification manufacture name should prominently be marked with CIPET test certification in the body of the pipe in indelible ink or stencilled to the satisfaction of Engineer in charge

Cleaning and developing the tube well using their own compressor continiously worked till clear and adequate dicharge is obtained fom the well including supply and use of all necessary equipment and abour asper the direction of Engineer in charge

Conducting yield test trough pumping for minimum 6 to 8 hours incuding supply of required pump set having 3.5 lps discharge at 70mt head ,15 KVADG set and container of 200 lits. Capacity as required to suit the site condition as per the direction of Engineer in charge incuding supply of tools plantsand labours for lowering and lifting the pump sets and measuring the yield of the bore well

Emty pannel board of size( 110cmx 45cmx25cm)made out of 20 gauge CR sheet with stand made of MS angle of 20 mm size with four nosof legs of 30 cm size painting in navy blue colour with inscription of OLIC

XLPE insulated( heavy duty) armoured electric cable of size 3 core x 6 sqmm ith aluminium conducter for use in three phase system in working voltage up tto 1100 volt and 50 HZ conferming to IS 7098 part I-1988 nd a per the perticular mentioned.

Cost of 63mm dia HDPE 80(PN 10) delivery pipe as per IS-1785/2004

Cost of 63mm dia HDPE 80(PN 6) delivery pipe as per IS-1785/2004

8 mm steel wire rope withPVC coated

3 core 2.5 sqmm submersible flat cable with bunched copper conductor insulated and sheathed with PVC for submersible pump mortor with voltage up to 100 volt confirming to IS694/1990

200 mm dia bore well cap

63 mm dia G.i bend with sockket confirming to Isno 1239(PTII/1992)

63mm dia stainless steel threaded nipple of15 cm long confirming to IS 1230-Pt-II/1992

FTH SS nut boilt

U clamp for fixing submersible cable and wire with rope

Supplying fitting and fixing of 1.5 HP Vertical Turbine pump set of ISI make as per direction of engineer in charge