Civil Maintenance work in Zakir Hussain Rose Garden, Sector 16, Chandigarh, Revenue Head.

Finishing walls with acrylic Smooth exterior paint of required shade:- Old work (one or more coat applied @ 0.96 ltr/10 sqm) on existing cement paint: (DSR:14.66.2)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. (DSR 14.54.1)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). as per direction of Engineer-in-charge. (DSR 15.2.1)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) DSR 4.1.10

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). (DSR 4.1.2)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR 15.60)

Centring and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls: Under 20 cm wide (DSR 5.9.16.1)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR 15.7.4)

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar as per direction of Engineer in charge. (DSR 15.8.3)

Brick on edge flooring with machine moulded perforated FPS bricks of class designation 12.5 conforming to IS :2222-1991 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand)

Brick on edge flooring with old machine moulded perforated FPS bricks of class designation 12.5 conforming to IS :2222-1991 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand)

Providing and applying JK putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (DSR 13.26)

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (DSR 15.25)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 25 mm thick (DSR 11.26.1)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR 13.91)

Reworking on existing faded/damaged artistic work/drawing on all outer wall faces of aerobic comosting pit compartments using good quality paint by skilled artist complete as per the satisfaction of Engineer In-Charge

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. as required. (DSR 10.25.2)

Providing and fixing metallic fabric consisting of 2"x2"x4mm size chain linked fencing of M.S wire duly welded or bolted over existing steel frame including sandwiching of chain link between M.S Angle, MS Flat complete to the entire satisfaction of the engineer-in-charge.

Renewal of top layer of jogging tracks for material after scrapping 1"-1 1/2" depth and filling 3" thick cinder and clay mix (top layer of cinder i.e. 80% and 20% of clay) on entire area and watering and compacted of new layer complete in all respect.

Please Enable Macros to View BoQ information