SPL REPAIR TO DRAIN FROM P-381 ADHIKARI ENCLAVE TO P-313 VINAY RAO CHAUHAN ENCLAVE AND REPAIR/REP OF FOUNTAIN, TILE FITTING AND MISC WORK NEAR BLDG NO T-54 OF HQ MB AREA IN AOR OF AGE B/R-I UNDER GE (WEST) JABALPUR

Amount

Excavation in trenches not exceeding 1.5 mtr wide & not exceeding 1.5 mtr deep in soft/loose soil including getting out complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness incl part chipping (below or above ground level) complete all as specified and as directed.

Demolition of reinforcement cement concrete below or above ground floors of any description n exc 15 cm thickness (Reinforcement to be cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars excluding ashlar facings dressed stone work, precast concrete articles complete all as specified and as directed.

M&L for RCC M 25 design mix (using 20 MM graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses etc complete all as specified and as directed.

M&L for RCC M-25 design mix (using 20 MM graded stone aggregate) as in foundations , including footings, rafts etc complete all as specified and as directed.

M&L for Use and waste form work for faces of walls, retaining walls etc. for rough finished surface complete all as specified and as directed.

M & L for Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

M&L for TMT bars 10mm over dia including cutting bending binding cranking placing & binding with MS wire (annealed) not less than 0.90mm dia as in main/distribution reinforcement complete all as specified and as directed.

M&L for TMT bars 6 to 8 mm dia including all cutting bending binding cranking placing & binding with MS wire (annealed) not less than 0.90mm dia as in main/distribution reinforcement complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundatian filling and mass conccrete complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in surface channal and drains complete all as specified and as directed.

M&L for EXTRA for forming fair finish to drain or channel 30 cm inner girt in cement concrete using extra cement incluiding formings moulds mitred stopped ends etc complete all as specified and as directed.

M&L for brick work with fly ash modular size bricks exceeding 6 mtr in mean radius and built in CM 1:4 complete all as specified and as directed

Ditto all as per Srl Item No 14 above item but except bricks complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including use of formwork (straight or curved), including weathering, slightly rounded or chamfered angles and throating, etc., complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick or concrete Surfaces of wall in CM (1:4) including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for moorum/ red bajri, spread, rolled and consolidated to gradient and camber as required complete all specified and as directed.

M&L for Precast perforated cement conrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slabs (perforated) for drain etc and similar work including necessary form work complete all as specified and as directed. Note:- (a) Reinforcement shall be measured and paid seperataly.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer on new plastered surfaces of wall including preparation complete all as specified and as directed.

M&L for two coats with synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, over 10cm width or girth including preparation complete all as specified and as directed.

M&L for PVC (SWR) pipes 110 mm bore single socketed in any length fixed in walls for weep holes complete all as specified and as directed.

M&L for RCC precast NP 2 pipes of 450 mm dia laid and tested in trenches complete all as specified and as directed.

M & L for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in concrete bed for 450 mm dia cement concrete NP 2 pipe including packing under and fencing against the side of pipe after they are laid and tested complete all as specified and as directed.

S&F in repairs, SFRC perforated drain cover of size 750mm x 450mm x 75 mm thick srounded with steel strip 75x1.50mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing drain complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole/drain cover and frame shall be approved by GE. (ii) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover.

Dismantling of wall tile, floor tile, dado including bedding but not backing and rubbish off permises Compiete all as specified and as directed.

Taking down cement plaster from walll/ceiing etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Taking down of eaves gutter,rain water pipes AC/PVC pipes upto 110mm dia of any size or pattern including all fttings etc complete all as specified and as directed.

M&L for 18 to 20 mm thick granite (Zed Black/Ruby Red) Stone Work (table rubbed and polished) as in cooking platforms, and like over 15mm thick cement screed base in CM (1:4) including pointing with white cement slurry with admixture/pigment to match with shade of slab including Border etc and rounding to edges complete all as specified and as directed.

M&L for ENDURA Out door tiles of size 60 cm x 60 cm x 10-12 mm thick rubberised mould set, jointed and pointed in neat cement slurry and pointed in white on coloured cement to match as in floors etc layed over and including 15 mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified and as directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 300X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slury and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate), as in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in floor sub base and finished even and fair complete all as specified and as directed.

M&L for Coloured cement concrete chequered tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 15 mm thick screed bed in CM (1:6) for laying floor finishes complete all as specified and all as direcred.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L for 15 mm thick rendering in CM (1:4), mixed with liquid water proofing compound as per manufacturer instruction and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. Note: The rate quoted by the contractor is deemed to be included for supply only WPC. Nothing will be paid extra in this regard.

S&F in repair gunmetal, globe or gate valve for 20 mm bore pipe with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F for 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors fixed with solvent suitable for CPVC pipe including Brass threaded fittings for fixing taps etc complete all as specified and as directed.

S&F for 110mm bore PVC (SWR) bends with access door ISI marked of any radius complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) junction single, (single T) equal or un equal of of pipe complete all as specified and as directed

M&L for applying one coat of synthetic enamel paint on old steel surfaces exceeding 10Cm in width or girth including preparation complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over and including water proof external putty on new surfaces complete all as specified and as directed. .

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over and including water proof external putty and including prepration on old surfaces complete all as specified and as directed. .

M&L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 complete complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed.

Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and as directed.

Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point etc complete all as specified and as directed.

Supply, Fixing, installation & Testing of Submersible pump set of Capacity 1 HP having maximum flow rate 3000 LPH and maximum lift 40 Meter complete all as specified and as directed.

Cutting of existing pipe for insertion of new connection with clamp of required size made of MS complete all as specified and as directed.

S&F for 25mm dia steel water tubing galvanised ,medium grade with all fittings and fixed complete to wall or in floors complete all as specified and as directed.

Supply and Fixing of Gun metal Gate Valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of pipe 25mm complete all as specified and as directed.

S& F for 20mm dia steel water tubing galvanised ,medium grade with all fittings and fixed complete to walls, or in floors complete all as specified and directed

Supply, fixing and Testing of XLPE insulated, amoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 core complete all as specified and as directed.

Supply, fixing and testing of Direct on line type starter for starting of submersible pump of capacity 1 HP and IP-65/66 degree protection complete all as specified and as directed.

Supply and fixing MCB of SPN 32 Amps rating 240V, 10KA 'C curve in the MCB DB with connecion testing and commissioning complete all as specified and as directed.

Supply and fixing MCB of SP 16 Amps rating 240V, 1OKA 'C curve in the MCB DB with connection testing and commissioning complete all as specified and as directed.

Supply & Fixing sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 4 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-65/66 degree protection complete all as specified and as directed.

Supply, fixing and laying of Submersible heavy duty electric cable with Copper conductor, 1100 volts grade, Flat Type, cross-sectional area 4 Sqmm 3 core complete all as specified and as directed.

Supply and fixing junction box of MS including 2 MCB of 16 amps and having IP-65/66 degree |protection complete allas specified and as directed.

chandra builders (BID ID -3316765)

M/S A.P.M. CONSTRUCTION CO. (BID ID -3320085)

deepak kumar vishwakarma (BID ID -3324010)

ANAMIKA CONSTRUCTION (BID ID -3328067)

M/S Modern builders (BID ID -3318942)

Hemant Associate (BID ID -3319960)

Pacific telecom engineers (BID ID -3319297)

solanki and company (BID ID -3319886)