REPAIR MAINTENANCE OF WOODEN FURNITURE FOR MD ACCN UNDER GE WEST DELHI CANTT 10

Amount

BED PLY TOP(DRG No FD-246 & 247)

Removing of old existing unsv plywood from Bed ply top and S&F new 12mm thick commercial ply wood (ISI marked), BWR grade of size 6.5' x 3' fitted over the bed with appropriate screws complete all as shown on drawing and as directed by Enge In - Charge . (Make of plywood shall be of Greenply/Century/Duro). Rest all per drg.

Removal of old existing unsv long rail from bed and S&F new long rail with rounded edges of size 1980 mm x 90mm x 35 mm of hard wood teak and fixing the same as shown on drawing including one coat of french polish after preparing the surface by sand paper complete all as specified in drg and as directed.

All as per srl item No. 1 .02 here-in-before but short rail of size 60mm x 60mm of suitable length.

All as per srl item No. 1 .02 here-in-before but stiffener of size 60mm x 60mm of suitable length.

Removing of old existing unsv ply wood from the existing head rest of Bed ply top and S & F new OSTF commercial plywood 04mm thick ISI marked, BWR grade to both sides of head rest including 04mm thick teak wood beading all around as per shape and size shown in drawing and fixed with nails and favocol including french polishing to complete head rest and all as specified in drg and directed. (Make of plywood shall be of Greenply/Century/Duro)

All as per srl item No 1 .05 here-in-before but foot rest.

Removing of old existing unsv head rest from the bed ply top and S&F new head rest made out of Ist class hard wood including provision of 04 mm thick one side teak faced commercial plywood and teak wood beading 04 mm thick as per shape and size shown in drawing and fixed with nails duly french polished with both side MNF arrangement and fixing the same all as shown on drawing.

All as per srl item No 1 .07 here-in-before but foot rest.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete bed and all as specified and as directed.

CHAIR DINING(FD-203/ 228/ 279/ 1105)

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made out of 1st class teak with nails of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge.

All as 2.01 above but front leg

All as 2.01 above but side rail

All as 2.01 above front/ back rail

All as 2.01 above but stiffner

All as 2.01 above but back strip

S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg. Rest all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete chair and all as specified and as directed.

CHAIR DINING JCO/ORS (Drg No FD/MAP-II/05)

M&L for removal of old existing unsv PVC seat of chair, S&F new PVC seat 4mm thick with holes screwed with rails all as specified in drg and as directed by the Engineer-in-Charge.

M & L for replacement of back leg made of 1st class teak with bamboo gutties of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge.

All as 3 .02 above but replacement of front leg

All as 3.02 above but replacement of side rail

All as 3.02 above but replacement of front/ back rail

All as 3.02 above but replacement of stiffener

All as 3.02 above but replacement of wooden back strip

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete chair and all as specified and as directed.

CHAIR WOODEN BOTTOM W/O ARMS (Drg No FD- 225/ 285)

M&L for removal of old existing unsv plywood seat of chair in any position, S&F new 3" foam cushion of 32 density duly covered with rexine of approved shade and fixed on 6 mm thick commercial, BWR grade plywood seat with steel screws of suitable size in position all as specified and as directed by the Engineer-in-Charge.

M & L for replacement of back leg made of 1st class hard wood.

All as 4 .02 above but replacement of front leg

All as 4 .02 above but replacement of side rail

All as 4 .02 above but replacement of front/ back rail

All as 4 .02 above but replacement of wooden back strip

All as 4 .02 above but replacement of stiffener

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete chair and all as specified and as directed.

CHAIR WRITING (Drg No FD- 202/ 280 )

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge.

All as 5 .01 above but front leg

All as 5 .01 above but side rail

All as 5 .01 above but front or back rail

All as 5 .01 above but back strip

All as 5 .01 above but arm rest

All as 5 .01 above but stiffner

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete chair and all as specified and as directed.

CHAIR EASY (Drg NoFD- 201/ 229/ 281 )

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak wood) all as shown on drg, specified and as directed by the Engineer-in-Charge.

All as 6 .01 above but front leg

All as 6 .01 above but side rail of seat frame

All as 6 .01 above but front or back rail of seat frame

All as 6 .01 above but side rail of back frame

All as 6 .01 above but top or bottom rail of back frame

All as per item No 6 .01 above but replacement of arm rest

S & F new hard PVC/ rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete chair and all as specified and as directed.

RECANNING TO DIFFERENT TYPES OF CHAIR(Drg No FD-279, 229, 280, 282 )

Recanning of wooden chair of different sizes with 2mm wide cane having 3mm wide plastic cane border in Godrej pattern all as shown on drawing. (Eg :- Chair Dining,Chair writing,Chair Easy,Stool Dressing CB etc.) (Make of cane shall be Aryan/ Shah/ Premier)

HAT STAND WITH MIRROR (Drg No FD-233 )

Removing old existing unsv plywood from front frame of hat stand and S&F new 04mm thick OSTF commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. (Make :- Greenply/Century/Duro)

Removing old existing unsv plywood from back side of hat stand and S&F new 04mm thick commercial plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed. (Make :- Greenply/Century/Duro)

Removing of old existing unsv looking mirror from hat stand and supplying and fixing new looking mirror of size 300 x 440 x 5mm of modi-gurard duly fixed in position complete all as shown on drawing (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old existing unsv beading from hat stand and S&F new 06x35mm thick teak wood beading all as per drawing including french polishing to match the other parts complete all as specified and directed.

Removing old existing unsv wooden battens from hat stand and S&F new teak wood wooden battens as per shape and size shown in drawing and as directed.

Removing of old existing unsv pegs from hat stand and S&F new brass pegs of size 120x75mm (overall) to hat stand all as per drg and as directed.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete Hat Stand and all as specified and as directed.

SOFA SET 04 SEATER WITH CUSHION (Drg No FD-281 )

Removing of old existing unsv arm rest from exiting sofa set 04 seater and supplying and fixing new 1st class hard wood teak arm rest to sofa set 04 seater complete as shown on drawing.

All as per item No 9.01 here-in-before but fornt rail of single seat of sofa set 04 seater.

All as per item No. 9.01 here-in-before but side rail of sofa set 04 seater.

All as per item No. 9.01 here-in-before but front legs of sofa set 04 seater.

All as per item No. 9.01 here-in-before but rear legs of sofa set 04 seater.

All as per item No. 9.01 here-in-before but wooden battens of sofa set 04 seater.

S&F foam cushion of size 22" X 21"X100 mm thick of 40 density duly covered with best quality tepstary cloth of approved quality and colour and all as directed. Rate of tapestry cloth shall not less than Rs. 200/- per meter duly stitched and fixing the same all as directed by Engr-in-Charge/ GE. Make of Cushion shall be of Sleepwell/ Feather-foam/ Kurl-on Goldline. The cover shall be removable duly provided with ZIP as directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE).

Removal of tapestry cloth from existing foam cushion of Sofa set 04 seater and providing new cover of approved shade. Rate not less than Rs. 200/- per meter duly stitched and fixing the same all as per drawing and as directed. The cover shall be removable duly provided with ZIP as directed by Engr-in-charge (Sample of tapestry cloth shall be approved by the GE).

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete sofa set and all as specified and as directed.

STOOL DRESSING CB (Drg No FD-282 )

Removing old existing unsv side/front top rail of stool dressing and S&F new side/front top rail of Ist class teak wood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing old existing unsv legs of stool dressing and S&F new legs of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing old existing unsv stiffiner from stool dressing and S&F new stiffiner of Ist class hard wood teak wood as per shape and size shown in drawing complete all as specified and directed.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete stool and all as specified and as directed.

TABLE BED SIDE (Drg No FD-276 )

Removing of old existing unsv top from table bed side and S&F the new new top of same size made out of 18/19 mm thick exterior grade pre-laminated particle board,teak faced,ISI marked all as shown on drawing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

All as per srl item No 11.01 here-in-before but side of table bed side.

Removing of old existing unsv shelves from table from table bed side and S&F the new shelf made out of 12mm thick exterior grade pre-laminated particle board teak faced of same size all as shown in darwing and as directed. (Make:- Ecoboard/Action- Tesa / Greenply).

Removing of old existing unsv back ply from table bed side and S&F the new back ply of same size of 06mm thick commercical plywood (ISI marked) all as shown in drawing including one coat of french polish all as specified and as directed.

PEG TABLE (Drg No FD-277 )

Removing of old existing unsv top from peg table and S&F new top made out of 18/19mm thick exterior grade particle board (ISI marked) duly post-formed all as directed by Engineer-in-charge. (Make:- Ecoboard/Action- Tesa / Greenply).

Replacement of old existing unsv leg from existing peg table and S&F the same size new leg made out of Ist class hard wood teak to Peg table duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No 12.02 here-in-before but long top rail.

All as per srl item No 12.02 here-in-before but short/ bottom rail.

All as per srl item No 12.02 here-in-before but stiffener of Peg table.

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete table and all as specified and as directed.

TEAPOY (Drg No FD-34/ 232/ 278/ 382 )

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade particle board (ISI marked) duly post-formed all as directed by Engineer-in-charge. (Make:- Ecoboard/Action- Tesa / Greenply)

All as 13.01 above but leg made of 1st class hard wood

All as 13.02 above but long rail

All as 13.02 above but short rail

All as 13.02 above but stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete teapoy and all as specified and as directed.

TABLE DINING 6 PERSONS(Drg No FD-239/ 273/ 376/ 1115)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade particle board (ISI marked) duly post-formed (Make:- Ecoboard/Action- Tesa / Greenply) for Table dining 6 persons all as per drg & as directed by Engineer-in-charge.

All as 14 .01 above but S&F new leg made of 1st class hard wood

All as 14 .01 above but long rail for Table Dinging 6 Person

All as 14 .01 above but short rail

All as 14 .01 above but support stiffner

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete table and all as specified and as directed.

TABLE DINING (JCOs/ORs) 1200 X 900 MM(Drg No FD-273, FD/MAP-II/03)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade particle board (ISI marked) duly post-formed all as directed by Engineer-in-charge. (Make:- Ecoboard/Action- Tesa / Greenply) for Table dining 4 persons

All as 15 .01 above but S&F new leg made of 1st class hard wood

All as 15 .02 above but long rail

All as 15 .02 above but short rail

All as 15 .02 above but support stiffner

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete table and all as specified and as directed.

TABLE 900 X 900 X 900 MM(Drg No FD-291 )

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade particle board (ISI marked) duly post-formed all as directed by Engineer-in-charge. (Make:- Ecoboard/Action- Tesa / Greenply) for Table dining 4 persons

All as 16.01 above but S&F new leg made of 1st class hard wood

All as 16.01 above but long rail

All as 16.01 above but short rail

All as 16.01 above but support stiffner

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete table and all as specified and as directed.

TABLE WRITING (Drg No FD-275/33)

M&L for removal of old existing unsv top of table in any position & S&F new top PFT (Post Forming Top) made of 18mm thick prelaminated particle board exterior grade, lamination extended up to minimum 50mm from the bottom edge fixed in position all as specified and directed.

S&F in replacement leg made of 1st class teak wood.

All as per item No 17.02 above but top long rail made of 1st class teak wood

All as per item No 17.02 above but top short rail made of 1st class teak wood

All as per item No 17.02 above but bottom short rail made of 1st class teak wood

All as per item No 17.02 above but bottom stiffner made of 1st class teak wood

All as per item No 17.02 above but drawers with knobs of CP Brass as directed by Engr-in-Charge.

All as per item No 17.02 above but shutter with complete fittings including knob of CP brass in shade as specified in drawing.

All as per item No 17.02 above but sides of side locker.

All as per item No 17.02 above but shelf of side locker.

All as per item No 17.02 above but bottom of side locker.

All as per item No 17.02 above but back of side locker.

All as per item No 17.02 above but new brass lock 75mm long, 06 lever with two keys to drawer of table all as shown on drawing or as directed. Make shall be of Godrej/Harrison/Plaza.

All as per item No 17.02 above but new CP brass kbob to drawer/ shutter of table as directed by Engr-in-Charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete table and all as specified and as directed.

TTABLE 900 x 600 mm without drawer (Drg No FD-223 284)

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade particle board (ISI marked) duly post-formed all as directed by Engineer-in-charge. (Make:- Ecoboard/Action- Tesa / Greenply).

All as 18 .01 above but leg made out of 1st class hard wood

All as 18 .01 above but replacement of long rail

All as 18 .01 above but replacement of short rail

All as 18 .01 above but replacement of bottom centre stiffener

All as 18 .01 above but replacement of bottom side stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete table and all as specified and as directed.

TTABLE 900 x 600 mm with drawer (Drg No FD- 224/ 283/ )

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade particle board (ISI marked) duly post-formed all as directed by Engineer-in-charge. (Make:- Ecoboard/Action- Tesa / Greenply).

All as 19 .01 above but leg made out of 1st class hard wood

All as 19 .01 above but replacement of long rail

All as 19 .01 above but replacement of short rail

All as 19 .01 above but replacement of drawer with fittings

All as 19 .01 above but replacement of bottom centre stiffener

All as 19 .01 above but replacement of bottom side stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete table and all as specified and as directed.

TABLE CENTRE(Drg No FD-274)

Removing of old existing unsv top from table centre and S&F new top made out of 18/19mm thick exterior grade particle board duly post-formed all as directed by Engineer-in-charge. (Make:- Ecoboard/ Action-Tesa / Greenlam).

Replacement of old existing unsv leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per srl item No 20.02 here-in-before but long rail.

All as per srl item No 20.02 here-in-before but short rail.

All as per srl item No 20.02 here-in-before but stiffener of table centre.

M & L for preparation of old surfaces by complete removal of existing treatment by grinding machine/ paint remover as applicable including filling of cavities by putty/filler/sealer and applying two coats of french/Lacquere polish using with spray machine to give smooth and glossy finish to complete chair and all as specified and as directed.

TABLE DRESSING LADIES WITH MIRROR(Drg No FD-251)

Removing of old existing unsv looking mirror from table dressing ladies and supplying and fixing new looking mirror of size 1200 x 450 x 5mm thick shall be fixed to the frame of teak wood and polishing complete in all respect to fix on wall all as shown on drawing. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old existing unsv knob from table dressing ladies and S&F new 25mm size CP brass knob as per shape and size shown in drawing and as directed.

Removing old existing unsv sliding glass from table dressing ladies and S&F new 05mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.

Removing old existing unsv legs from table dressing ladies and S&F new legs of Ist class hard wood teak as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.

Removing old existing unsv sunmica from the top of table dressing ladies and S&F new 1.5 mm thick teakfaced sunmica of best quality fixed with adhesive as per shape and size shown in drawing complete all as specified and directed.

Removing old existing unsv sunmica from the drawer of table dressing ladies and S&F new 1.5 mm thick sunmica of best quality fixed with fevicoal as per shape and size shown in drawing complete all as specified and directed.

TABLE DRESSING GENTS WITH MIRROR(Drg No FD-230)

Removing of old existing unsv looking mirror from table dressing gents with mirror and supplying and fixing new looking mirror of size 750 x 450 x 5mm thick shall be fixed to the frame of teak wood and polishing complete in all respect and all as shown on drawing. (Make:- Modi-guard/Saint-Gobain/Swastik).

Removing old existing unsv sunmica from the top of table dressing gents and S&F new 1.5 mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed.

Removing old existing unsv sunmica from the drawer of table dressing gents and S&F new 1.5 mm thick sunmica of best quality fixed with fevicoal adhesive as per shape and size shown in drawing complete all as specified and directed.

Removing old existing unsv knob from table dressing gents and S&F new 25mm size CP brass knob as per sample, shape and size shown in drawing complete all as specified and directed.

POLISHING OF WOODEN FURNITURE Material and labour for removing/scrubbing of all old polished surfaces by using grinding machine & sand paper/ emary paper etc, including filling of cavities by putty/filler/sealer, preparation of old wooden surfaces by applying seina/burnt seina in uniformally and and applying two coats of french/Lacquere polish using spray machine to obtain glossy finish to the following wooden furniture items complete all as specified and as directed by Engg-in-Charge.

Bed Ply Top(Drg No FD-246 & 247)

Chair Dining(Drg No FD - 279)

Chair Writing(Drg No FD - 280)

Chair Easy(Drg No FD-281, 229)

Hat Stand with Mirror(Drg No FD-362)

Sofa Set 04 seater with cushion(Drg NoFD-281)

Table Writing(Drg NoFD-275)

Table Centre (Drg NoFD-274)

Table Dining 06 Person (Drg NoFD-273)

Table Dining 1200x900mm(Drg No FD-273, FD/MAP-II/03)

Table dressing Gents with mirror(Drg NoFD-230)

Table dressing Ladies with mirror(Drg NoFD-251)

Table peg (Drg NoFD-277)

Teapoy (Drg NoFD-278)

Table 900x600mm(Drg NoFD -223/284)

Table 900x600mm(Drg NoFD -224/ 283)

Deduct Credit: for demolished/dismantled material of (-) Rs 98444.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

M/S CHANDER SHEKHAR

M/s M M BAHL

F.M. KHAN SONS

M/s Krishna Construction Co.

GUJRAL BUILDERS

SMS Enterprises

M/S Parshant Associates

M/S Shri Balaji Enterprises

M/S NEHAL ENTERPRISES