86117SPECIAL REPAIRS TO INTERNAL ROADS, ROAD FURNITURE AND ALLIED WORKS AT AFMC UNDER GE (CENTRAL) PUNE.

Amount

M&L for repair to pot holes any depth, n.exc. 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road paths etc, cutting around edges to at least 25 mm in depth making good by filling in screened and graded road metal applying tack coat with bituminous primer (of bitumen grade VG-10) @ 5 kg per 10 sqm, putting in bituminous (of bitumen grade VG-30) pre-mix asphaltic semi dense concrete (design mix) 30 mm (consolidated thickness) with 5.5% binder content by weight of total mix, laid with mechanical paver, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and as directed.

Scarifying and picking gravelled macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and in exc 50 mm and n exc 100 mm in depth and removing the same to a distance n exc 50m and staking complete all as specified and as directed.

M&L for premixed bituminous macadam with binder content @ (VG-30) 4% by weight of total mix (Job Mix) laid / rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete all as specified and as directed.

M&L for preparation of BM surfaces and applying evenly a tack coat of 2.5 kg / 10 sqm using bituminous primer over prepared BM surface complete all as specified and as directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with mechanical compressure to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bitumen (VG-10 grade ) @ 5.0 kg per 10 sqm and providing and laying bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.5% paving bitumen of grade VG-30 , binder content by weight of total mix , rolled and compacted to required gradient & camber using 8 to 12 tonne power roller complete all as specified and as directed. Note : Contractor shall submit the authenticated weight batch receipt as per load material in site duly marked vehicle No.

M&L for preparation of black top surfaces of road and applying 2 mm thick retro-reflective thermoplastic road marking paint, as lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm width, by mechanical machine, white or golden yellow including putting glass beads of standard size by drop method complete all as specified and directed by Engineer-in-Charge.

M&L for moorum or red bajri filings in side berms of road ,floor or paving ,laid in layer n exc 15 cm thick , spread , levelled and rammed incl watering complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for cement concrete work in pavement / hard standing of flexural strength 40 kg / per square centimeter in field using 400 kg of cement per cubic meter, thickness of concrete 25 cm or less including using necessary formwork etc complete all as per specified and directed by Engineer-in-Charge.

M&L for TMT bars 8 mm dia and over cut to length ,bend to shape required, including cranking, bending spirally for hooping for pavement, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips quality complete all as specified and as directed

M&L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide and filled with sealing compound Grade A complete all as specified and as directed

M&L for forming 12 mm thick expansion joint for 100 mm thick concrete slab, filled with sealing compound grade A complete all as specified and as directed

Dismantling stone slab / tiles of any description or thickness, laid, bedded and pointed in cement mortor in floors, hard standing, apron etc complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) ,type D-2 (using 40 mm graded stone aggregate) as in sub base / flooring etc complete all as specified and as directed.

M&L for machine pressed precast cement concrete reflective type interlocking tiles, paver blocks, any shape and size as approved, 60 mm thick, confirming to IS 15658-2006, M-35 grade in floor / pavement laid over and including 25 mm thick stote dust/grit cushioning laid dry to the profile complete all as specified and as directed.

M&L for precast cement concrete Kerb stone with PCC type-C-1 (1:3:6) using 20 mm stone aggregates including weathering slightly rounded or chemfered angles or throating etc set in cement mortar (1:3) complete all as specified and as directed.

S&F in repair, plastic Glass Beads Reflectors Cat Eyes made of body materials ABC plastic size 117 mm x 117 mm x 23 mm reflector 19 or 20 BI glass elements on each side with compressive strength upto 35 tonnes, yellow/ red colour body with reflector fixing by epoxy complete all as specified and as directed.

S&F MS delinators SVD-3, 900 mm long 75 mm dia MS pipe medium grade with HIP 75 mm around. There strip of 50 mm wide (each strip) and with mess, with yellow, green, red, Hi retro reflective tape with metal jally, complete all as specified and as directed. Note : The rate quaoted is deemed to include for excavation and PCC 1:2:4, B2 of size 300 mm x 300 mm x 300 mm.

Taking down old unserviceable sign board and S&F retro reflective sign board of size 900 mm x 600 mm fixed both side on board made out of aluminium composite panel (ACP) sheet 3 mm thick fixed on SS-304 series hollow tubular section, 38 mm bore. The board shall be provided with reflective tape of quality high intensity chequared type blue colour, letter / symbol and shall be written in white colour writting of approved shape. The sign board shall be supported on 1 No post of 60 mm bore stainless steel pipe, 304 series 3 m long with round moulded design on top duly embedded in ground of size 450 mm x 450 mm x 600 mm in PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) including necessary excavation / earthwork in any strata etc complete all as specified and as directed.

S&F retro reflective sign board of size 1200 mm x 900 mm fixed both side on board made out of out of aluminium composite panel (ACP) sheet 3 mm thick fixed on SS-304 series hollow tubular section, 38 mm bore. The board shall be provided with reflective tape of quality high intensity chequared type blue colour, letter / symbol and shall be written in white colour writting of approved shape. The sign board shall be supported on 2 No post of 60 mm bore stainless steel pipe, 304 series 3 m long with round moulded design on top duly embedded in ground of size 450 mm x 450 mm x 600 mm in PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) including necessary excavation / earthwork in any strata etc complete all as specified and as directed.

All as per item No 20 here- in- above but sign board of size 1800 mm x 1200 mm complete all as specified and as directed.

All as per item No 20 here- in- above but sign board of size 2400 mm x 1200 mm complete all as specified and as directed.

S&F unbreakable traffic convex mirror of dia 1000 mm, fixed over & including 50 mm bore SS pipe of length 1500 mm fixed in ground with PCC (1:4:8) type D2 for foundation complete all as specified and as directed.

R K Enterprises